Barco R9801785 Fixed OEM Ultra-Short Throw Projector Lens — G50-W6, G50-W7, G50-W8, G60-W10-B

Specifications

All specifications above are sourced from OEM documentation and the Zorsika product database. For complete technical datasheets, please contact your sales representative.

R9801785 Fixed Model Compatibility List (15 models, with brightness/resolution)

The following are verified compatible projector models for the R9801785 Fixed, with brightness and resolution for each; all compatible lens models are R9801785 Fixed:

Note: Brightness/resolution data is sourced from the model database (refer to the unit's nameplate/manual for accuracy); lens compatibility is determined by the unit's lens interface and panel/chip size. For models not on this list, please contact Zorsika technical support for confirmation.

About This OEM Lens

Barco R9801785 Fixed Lens

The R9801785 Fixed is an Ultra Short Throw lens from Barco's original factory, with optical construction, lens coatings, and chassis tolerances all matching original machine specifications, ready to install and delivering stable imaging. For installation environments with limited projection distance (such as short-throw large images, wall-mounted ultra short throw), choosing the correct throw ratio is more critical than choosing a general-purpose lens.

This lens has a throw ratio of 0.36:1. Throw ratio = projection distance ÷ image width: smaller values produce larger images (suitable for close-proximity small spaces), while larger values require greater installation distances. Back-calculate the required throw ratio range based on on-site installation distance and screen size, then match it to this model.

Authenticity & Purchasing Information

Zorsika provides genuine Barco OEM lens R9801785 Fixed through official channels, complete with original factory packaging and traceable serial numbers, suitable for bulk procurement and project supply for engineering projection, conference rooms, classrooms, and similar applications.

• Authenticity Guaranteed: Official factory channels with original packaging and serial numbers; bulk projects may request channel documentation to eliminate refurbished or unverified sources.
• Compatibility Verification: Provide your machine model when ordering, and Zorsika technicians will verify against the model compatibility list above to ensure proper fit.
• Project Supply: R9801785 Fixed covers 15 models; common projects can be scheduled in advance to shorten delivery time.
• Alternative Options: If budget is a concern, Zorsika also offers same-specification alternative lenses with key parameters matching OEM standards, available as needed.

Note: Actual imaging performance may vary depending on machine condition and installation environment; it is recommended to test one unit before large-volume orders.

Frequently Asked Questions

Q: How to choose between OEM and alternative lenses?

A: OEM lenses are manufactured by Barco, with optical parameters and chassis tolerances calibrated to original machine specifications, suitable for projects with strict OEM consistency requirements; Zorsika alternative lenses are independently designed and manufactured to the same specifications, with throw ratio, imaging circle, and mount matching the original machine, offering advantages in cost and delivery time. Zorsika supplies both lines—choose based on your project requirements.

Q: How do I confirm this lens works with my machine?

A: Use the machine's lens interface and panel/chip size as reference; this article lists verified compatible models. Engineering projectors of the same generation and brand often share interfaces. When in doubt, photograph the machine's nameplate and send it to Zorsika technical support for confirmation.

Q: How to choose the right throw ratio?

A: Throw ratio = projection distance ÷ image width. Smaller values produce larger images (short-throw/ultra short throw suitable for close-proximity small spaces), larger values require greater installation distances. Back-calculate the required throw ratio range based on installation distance and screen size, then match it to this model's focal length.

Q: How does R9801785 Fixed ensure authenticity?

A: Zorsika provides genuine products through original factory channels, complete with original factory packaging and traceable serial numbers; bulk projects may request channel documentation to ensure no refurbished or used disassembled parts.

Q: What should I watch out for when replacing the lens?

A: Be sure to power off and wait for the cooling fan to stop before disassembly and installation; hold the lens by the barrel, avoiding contact with the glass; use an air blower to gently remove any dust; after proper installation, test focusing before tightening the mounting screws, and also clean the mount and contacts.

Q: What is the lens warranty period?

A: All Zorsika projector lenses come with a 12-month warranty; normal use and non-human damage (such as impacts, water exposure, unauthorized disassembly) can be handled directly through after-sales service. The warranty period is calculated from the shipping document date.

Related Query Links

• Zorsika Technical Support Center
• Projector Brand & Compatible Model Search
• Projector Lamp / Lens / Air Filter Product Library

Purchase Inquiry

For consultation, project planning, or a complete compatible model list for the Barco OEM lens R9801785 Fixed, please contact us through the following channels:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

Lens model and compatible model data in this article are sourced from OEM documentation and the Zorsika product database; data is continuously updated and subject to confirmation upon actual inquiry.