At a glance
- Specifications
- ILSH-07 Compatible Projector Models (2 Models with Brightness/Resolution)
- About This Original Lens
- Genuine Product and Purchasing Information
- FAQ
- Q: How do I choose between an original lens and a replacement lens?
- Q: How do I confirm this lens works with my projector?
- Q: How do I choose the throw ratio?
- Q: How can I ensure the ILSH-07 is genuine?
- Q: What should I pay attention to when replacing the lens?
- Q: How long is the lens warranty?
- Related Inquiry Links
- Purchasing Inquiries
Digital Projection original lens ILSH-07, short throw, throw ratio 0.75:1 (fixed), compatible with 2 Digital Projection models: E-Vision 8500 and Titan 8700. Genuine supply, bulk orders available for projects.
The Digital Projection ILSH-07 is an original (OEM) lens for Digital Projection installation projectors. It is a short throw lens with a throw ratio of 0.75:1 (fixed focal length). This article compiles its 2 compatible projector models, optical specifications, and purchasing considerations, so you can quickly verify compatibility by projector model.
Digital Projection Original Lens ILSH-07Specifications
| Lens Model | ILSH-07 |
| Brand (OEM) | Digital Projection (Digital Projection) |
| Compatible Panel / Chip | 0.95inch 3DLP(E-Vision/Titan) |
| OEM Part No. | 141-105 |
| Remarks | ILS interface |
| Throw Ratio | 0.75:1 (fixed focal length) |
| Product Type | Short Throw |
| Number of Compatible Models | 2 models |
| OEM Product Page | Digital Projection Official Introduction |
The above specifications are sourced from OEM documentation and the Zorsika product database; a full technical datasheet is available upon request from our sales team.
ILSH-07 Compatible Projector Models (2 Models with Brightness/Resolution)
The following are verified compatible projector models for the ILSH-07, each with brightness and resolution; the compatible lens model for all is ILSH-07:
| Projector Model | Brightness | Resolution | Lens Model |
|---|---|---|---|
| E-Vision 8500 | — | — | ILSH-07 |
| Titan 8700 | — | — | ILSH-07 |
Note: Brightness/resolution are taken from the model database (refer to the unit's nameplate/user manual for accuracy); lens compatibility is determined by the projector's lens mount and panel/chip size. For models not listed, please contact Zorsika technical support for confirmation.
About This Original Lens
The ILSH-07 is a short throw lens manufactured by Digital Projection as an OEM product. Its optical structure, lens coatings, and body tolerances are all matched to the original projector's standards, ensuring plug-and-play installation and stable imaging. For installation environments with limited projection distance (e.g., projecting large images from short distances, or ultra-short throw wall-mounted setups), choosing the right throw ratio is more critical than opting for a generic lens.
This lens has a throw ratio of 0.75:1 (fixed focal length). Throw ratio = projection distance ÷ image width: the smaller the value, the larger the image (ideal for close-range, compact spaces); the larger the value, the greater the installation distance required. Work backward from your on-site installation distance and screen size to determine the required throw ratio range, then match it to this model.
Genuine Product and Purchasing Information
Zorsika offers genuine Digital Projection original lens ILSH-07 through authorized channels, complete with OEM packaging and traceable serial numbers, suitable for bulk procurement and project supply for installation projectors, conference rooms, classrooms, and similar projects.
- Genuine Product Guarantee: Sourced through official OEM channels, with OEM packaging and serial numbers; for bulk projects, channel documentation can be requested to rule out refurbished units or unverified sources.
- Compatibility Verification: Provide your projector model before ordering, and Zorsika technical support will verify it against the compatible model list above to avoid installation issues.
- Project Supply: The ILSH-07 covers 2 projector models; common projects can be scheduled in advance to shorten lead times.
- Alternative Options: If budget is a concern, Zorsika can also supply equivalent replacement lenses with key specifications benchmarked against OEM standards, allowing you to choose based on your needs.
Note: Actual imaging performance is affected by projector condition and installation environment; for large orders, it is recommended to test one unit first.
FAQ
Q: How do I choose between an original lens and a replacement lens?
A: Original lenses are manufactured by Digital Projection, with optical parameters and body tolerances calibrated to the original projector, making them ideal for projects with strict requirements for OEM consistency; Zorsika replacement lenses are independently designed and manufactured to the same specifications, with throw ratio, image circle, and mount matched to the original, offering advantages in budget and lead time. Zorsika can supply both options—choose based on your project requirements.
Q: How do I confirm this lens works with my projector?
A: Refer to the projector's lens mount and panel/chip size; this article lists verified compatible models. Projectors of the same generation and brand often share the same mount; if unsure, take a photo of the unit's nameplate and send it to Zorsika technical support for confirmation—it's the safest approach.
Q: How do I choose the throw ratio?
A: Throw ratio = projection distance ÷ image width. The smaller the value, the larger the image (short throw/ultra-short throw suits close-range, compact spaces); the larger the value, the greater the installation distance needed. Work backward from your installation distance and screen size to determine the required throw ratio range, then match it to this model's focal length.
Q: How can I ensure the ILSH-07 is genuine?
A: Zorsika supplies genuine products through OEM channels, complete with OEM packaging and traceable serial numbers; for bulk projects, channel documentation can be requested to ensure the lens is not refurbished or a used disassembled part.
Q: What should I pay attention to when replacing the lens?
A: Before removal, be sure to power off the projector and wait for the cooling fan to stop; hold the lens by the barrel without touching the glass, and use a blower for dust; after installation, test focus before tightening the locking screws, and clean the mount and contacts as you go.
Q: How long is the lens warranty?
A: Zorsika provides a 12-month warranty on all projector lenses; for normal use and non-man-made damage (e.g., impact, water ingress, unauthorized disassembly), contact after-sales service directly. The warranty period is based on the shipping document date.
Related Inquiry Links
- Zorsika Technical Support Center
- Projector Brand and Compatible Model Lookup
- Projector Lamp / Lens / Air Filter Product Library
Purchasing Inquiries
For consultation on Digital Projection original lens ILSH-07 solutions, project proposals, or a complete compatible model list, please contact us through the following channels:
- Website: www.zorsika.com
- Phone: 0086-20-38551187
- Email: sales@zorsika.com
- Business Hours: Monday to Friday, 9:00-18:00
The lens model and compatible projector data in this article are sourced from OEM documentation and the Zorsika product database; data is continuously updated and subject to confirmation at the time of inquiry.