At a glance
- Specifications
- ILS-07 Compatible Projector Models (2 models, with brightness/resolution)
- About This Original Lens
- Genuine Product and Purchasing Information
- FAQ
- Q: How do I choose between an original lens and an alternative lens?
- Q: How do I confirm this lens will work on my projector?
- Q: How do I choose the throw ratio?
- Q: How can I be sure the ILS-07 is genuine?
- Q: What should I pay attention to when replacing the lens?
- Q: How long is the lens warranty?
- Related Inquiry Links
- Purchasing Consultation
Digital Projection original lens ILS-07, long throw, throw ratio 1.58-2.35:1, compatible with 2 Digital Projection models: E-Vision 8500 and Titan 8700. Genuine supply, bulk orders available for projects.
The Digital Projection ILS-07 is an original (OEM) lens for Digital Projection installation projectors. It is a Long Throw lens with a throw ratio of 1.58-2.35:1. This article compiles its 2 compatible projector models, optical specifications, and purchasing considerations, allowing you to quickly verify compatibility by projector model.
Digital Projection Original Lens ILS-07Specifications
| Lens Model | ILS-07 |
| Brand (OEM) | Digital Projection |
| Compatible Panel / Chip | 0.95inch 3DLP(E-Vision/Titan) |
| Original Part No. | 141-102 |
| Remarks | ILS interface |
| Throw Ratio | 1.58-2.35:1 (Long Throw) |
| Product Type | Long Throw |
| Number of Compatible Models | 2 models |
| OEM Product Page | Digital Projection Official Introduction |
The above specifications are sourced from OEM documentation and the Zorsika product database; a complete technical datasheet is available upon request from our sales team.
ILS-07 Compatible Projector Models (2 models, with brightness/resolution)
The following are verified compatible models for the ILS-07, each with brightness and resolution; the compatible lens model for all is ILS-07:
| Projector Model | Brightness | Resolution | Lens Model |
|---|---|---|---|
| E-Vision 8500 | — | — | ILS-07 |
| Titan 8700 | — | — | ILS-07 |
Note: Brightness/resolution are taken from the model database (refer to the unit's nameplate/manual for accuracy); lens compatibility is determined by the projector's lens mount and panel/chip size. For models not listed, please contact Zorsika technical support for confirmation.
About This Original Lens
The ILS-07 is an original Long Throw lens manufactured by Digital Projection. Its optical construction, lens coatings, and body tolerances are all matched to original machine standards, ensuring plug-and-play installation and stable imaging. For installation environments with limited projection distance (e.g., short-distance large images, wall-mounted ultra-short throw), choosing the correct throw ratio is more critical than opting for a generic lens.
This lens has a throw ratio of 1.58-2.35:1 (Long Throw). Throw ratio = projection distance ÷ image width: the smaller the value, the larger the image (suitable for short distances in small spaces); the larger the value, the greater the installation distance required. Calculate the required throw ratio range based on your on-site installation distance and screen size, then match it to this model.
Genuine Product and Purchasing Information
Zorsika provides genuine Digital Projection original lens ILS-07 through authorized channels, complete with original packaging and traceable serial numbers, suitable for bulk procurement and project supply for installation projectors, conference rooms, classrooms, and similar applications.
- Genuine Product Guarantee: Sourced through official OEM channels, with original packaging and serial numbers; for bulk projects, channel documentation can be provided upon request to eliminate refurbished units or units of unknown origin.
- Compatibility Verification: Provide the projector model before ordering, and Zorsika technical support will verify against the compatible model list above to ensure proper fit.
- Project Supply: The ILS-07 covers 2 projector models; common projects can be scheduled in advance to shorten lead times.
- Alternative Solutions: If budget is a concern, Zorsika can also supply equivalent alternative lenses with key specifications benchmarked against OEM standards, allowing you to choose based on your needs.
Note: Actual imaging performance is affected by projector condition and installation environment; for large orders, it is recommended to test one unit first.
FAQ
Q: How do I choose between an original lens and an alternative lens?
A: Original lenses are manufactured by Digital Projection, with optical parameters and body tolerances calibrated to original machine standards, making them suitable for projects with strict requirements for OEM consistency; Zorsika alternative lenses are independently designed and manufactured to the same specifications, with throw ratio, image circle, and mount matched to the original machine, offering advantages in budget and lead time. Zorsika can supply both options—choose based on your project requirements.
Q: How do I confirm this lens will work on my projector?
A: Refer to the projector's lens mount and panel/chip size; this article lists verified compatible models. Projectors of the same generation and brand often share the same mount; if unsure, take a photo of the nameplate and send it to Zorsika technical support for confirmation—it's the safest approach.
Q: How do I choose the throw ratio?
A: Throw ratio = projection distance ÷ image width. The smaller the value, the larger the image (short throw/ultra-short throw suits short distances in small spaces); the larger the value, the greater the installation distance required. Calculate the required throw ratio range based on your installation distance and screen size, then match it to this model's focal length range.
Q: How can I be sure the ILS-07 is genuine?
A: Zorsika supplies genuine products through OEM channels, with original packaging and traceable serial numbers; for bulk projects, channel documentation can be requested to ensure the unit is not refurbished or a used pulled part.
Q: What should I pay attention to when replacing the lens?
A: Before disassembly, ensure the projector is powered off and the cooling fan has stopped; hold the lens by the barrel without touching the glass, and use a blower to gently remove dust; after installation, perform a focus test before tightening the locking screws, and clean the mount and contacts as you go.
Q: How long is the lens warranty?
A: Zorsika offers a 12-month warranty on all projector lenses; for normal use and non-man-made damage (e.g., impact, water ingress, unauthorized disassembly), contact after-sales service directly. The warranty period is based on the shipping document date.
Related Inquiry Links
- Zorsika Technical Support Center
- Projector Brand and Compatible Model Lookup
- Projector Lamp / Lens / Air Filter Product Library
Purchasing Consultation
For consultation on the Digital Projection original lens ILS-07, project proposals, or a complete list of compatible models, please contact us via:
- Website: www.zorsika.com
- Phone: 0086-20-38551187
- Email: sales@zorsika.com
- Business Hours: Monday to Friday, 9:00-18:00
The lens model and compatible projector data in this article are sourced from OEM documentation and the Zorsika product database; data is continuously updated and subject to confirmation at the time of inquiry.