At a glance
- Specifications
- ILS-09 Compatible Projector Models (2 models, with brightness/resolution)
- About This Original Lens
- Genuine Product and Purchasing Information
- FAQ
- Q: How do I choose between an original lens and a replacement lens?
- Q: How do I confirm this lens works with my projector?
- Q: How do I choose the throw ratio?
- Q: How can I ensure the ILS-09 is genuine?
- Q: What should I pay attention to when replacing the lens?
- Q: What is the warranty period for the lens?
- Related Inquiry Links
- Purchasing Inquiries
Digital Projection original lens ILS-09, Long Throw, throw ratio 3.70-6.30:1 (ultra long throw), compatible with 2 Digital Projection models: E-Vision 8500 and Titan 8700. Genuine supply channel, bulk orders available for projects.
The Digital Projection ILS-09 is an original (OEM) lens for Digital Projection installation projectors. It is a Long Throw lens with a throw ratio of 3.70-6.30:1 (ultra-long throw). This article compiles its 2 compatible projector models, optical specifications, and purchasing considerations for quick compatibility verification by projector model.
Digital Projection Original Lens ILS-09Specifications
| Lens Model | ILS-09 |
| Brand (OEM) | Digital Projection |
| Compatible Panel / Chip | 0.95inch 3DLP (E-Vision/Titan) |
| OEM Part No. | 141-104 |
| Remarks | ILS interface |
| Throw Ratio | 3.70-6.30:1 (ultra-long throw) |
| Product Type | Long Throw |
| Number of Compatible Models | 2 models |
| OEM Product Page | Digital Projection Official Introduction |
The above specifications are sourced from OEM documentation and the Zorsika product database; full technical datasheets are available upon request from our sales team.
ILS-09 Compatible Projector Models (2 models, with brightness/resolution)
The following are verified compatible models for the ILS-09, each with brightness and resolution; the compatible lens model for all is ILS-09:
| Projector Model | Brightness | Resolution | Lens Model |
|---|---|---|---|
| E-Vision 8500 | — | — | ILS-09 |
| Titan 8700 | — | — | ILS-09 |
Note: Brightness/resolution data is taken from the model database (refer to the nameplate/user manual on the unit); lens compatibility is determined by the lens mount and panel/chip size on the projector. For models not listed, please contact Zorsika technical support for confirmation.
About This Original Lens
The ILS-09 is an original Long Throw lens manufactured by Digital Projection. Its optical structure, lens coatings, and body tolerances are matched to original machine standards, ensuring plug-and-play installation and stable imaging. For installation environments with limited projection distance (e.g., short-distance large images, wall-mounted ultra-short throw), choosing the right throw ratio is more critical than opting for a generic lens.
This lens has a throw ratio of 3.70-6.30:1 (ultra-long throw). Throw ratio = projection distance ÷ image width: a smaller value means a larger image (suitable for close-range, small spaces), while a larger value requires a greater installation distance. Calculate the required throw ratio range based on your installation distance and screen size, then match it to this model.
Genuine Product and Purchasing Information
Zorsika supplies the genuine Digital Projection original lens ILS-09 through authorized channels, complete with original packaging and traceable serial numbers, suitable for bulk procurement and project supply in installation projection, conference rooms, classrooms, and similar projects.
- Genuine Product Guarantee: Sourced through official OEM channels, with original packaging and serial numbers; channel documentation can be requested for bulk projects to eliminate refurbished or unverified units.
- Compatibility Verification: Provide your projector model before ordering, and Zorsika technical support will cross-check against the compatible model list above to ensure a proper fit.
- Project Supply: The ILS-09 covers 2 projector models; common projects can be scheduled in advance to shorten lead times.
- Alternative Options: If budget is a concern, Zorsika also offers equivalent replacement lenses with key parameters matched to OEM specifications, allowing you to choose as needed.
Note: Actual imaging performance is affected by projector condition and installation environment; it is recommended to test 1 unit before large-volume orders.
FAQ
Q: How do I choose between an original lens and a replacement lens?
A: Original lenses are manufactured by Digital Projection, with optical parameters and body tolerances calibrated to original machine standards, ideal for projects with strict OEM consistency requirements; Zorsika replacement lenses are independently designed and manufactured to the same specifications, with throw ratio, image circle, and mount matched to the original, offering advantages in budget and lead time. Zorsika supplies both options—choose based on your project requirements.
Q: How do I confirm this lens works with my projector?
A: Refer to the lens mount and panel/chip size on your projector; this article lists verified compatible models. Projectors of the same generation and brand often share interfaces; if unsure, photograph the nameplate and send it to Zorsika technical support for confirmation—this is the safest approach.
Q: How do I choose the throw ratio?
A: Throw ratio = projection distance ÷ image width. A smaller value means a larger image (short-throw/ultra-short-throw for close-range, small spaces), while a larger value requires a greater installation distance. Calculate the required throw ratio range based on your installation distance and screen size, then match it to this model's focal length range.
Q: How can I ensure the ILS-09 is genuine?
A: Zorsika supplies genuine products through OEM channels, with original packaging and traceable serial numbers; channel documentation can be requested for bulk projects to ensure the unit is not refurbished or a used pulled part.
Q: What should I pay attention to when replacing the lens?
A: Always power off the projector and wait for the cooling fan to stop before removal/installation; hold the lens barrel without touching the glass, and use a blower for dust; after installation, test focus before tightening the locking screws, and clean the mount and contacts as you go.
Q: What is the warranty period for the lens?
A: Zorsika provides a 12-month warranty on all projector lenses; normal use and non-manual damage (e.g., impact, water ingress, unauthorized disassembly) can be handled directly through after-sales service, with the warranty period starting from the shipping date on the invoice.
Related Inquiry Links
- Zorsika Technical Support Center
- Projector Brand and Compatible Model Lookup
- Projector Lamp / Lens / Air Filter Product Library
Purchasing Inquiries
For consultation on the Digital Projection original lens ILS-09, project proposals, or a complete compatible model list, please contact us through the following channels:
- Website: www.zorsika.com
- Phone: 0086-20-38551187
- Email: sales@zorsika.com
- Business Hours: Monday to Friday, 9:00-18:00
The lens model and compatible projector data in this article are sourced from OEM documentation and the Zorsika product database, and are continuously updated; final confirmation is subject to actual quotation inquiries.