At a glance
- Specifications
- ILS-10 Compatible Projector Models (2 models with brightness/resolution)
- About This Original Lens
- Genuine Product and Purchasing Information
- FAQ
- Q: How do I choose between an original lens and a replacement lens?
- Q: How do I confirm this lens works with my projector?
- Q: How do I choose the throw ratio?
- Q: How can I be sure the ILS-10 is genuine?
- Q: What should I pay attention to when replacing the lens?
- Q: What is the warranty period for the lens?
- Related Inquiry Portals
- Purchasing Consultation
Digital Projection original lens ILS-10, long throw, throw ratio 6.20-9.30:1 (ultra long throw), compatible with 2 Digital Projection models: E-Vision 8500 and Titan 8700. Genuine supply, bulk orders available for projects.
The Digital Projection ILS-10 is an original (OEM) lens for Digital Projection installation projectors. It is a Long Throw lens with a throw ratio of 6.20-9.30:1 (ultra-long throw). This article compiles its 2 compatible projector models, optical specifications, and purchasing considerations for quick compatibility verification by projector model.
Digital Projection Original Lens ILS-10Specifications
| Lens Model | ILS-10 |
| Brand (OEM) | Digital Projection (Digital Projection) |
| Compatible Panel / Chip | 0.95inch 3DLP(E-Vision/Titan) |
| OEM Part No. | 141-105 |
| Remarks | ILS interface |
| Throw Ratio | 6.20-9.30:1 (ultra-long throw) |
| Product Type | Long Throw |
| Number of Compatible Models | 2 models |
| OEM Product Page | Digital Projection Official Introduction |
The above specifications are sourced from OEM documentation and the Zorsika product database; a complete technical datasheet is available upon request from our sales team.
ILS-10 Compatible Projector Models (2 models with brightness/resolution)
The following are verified compatible models for the ILS-10, each with brightness and resolution; the compatible lens model for all is ILS-10:
| Projector Model | Brightness | Resolution | Lens Model |
|---|---|---|---|
| E-Vision 8500 | — | — | ILS-10 |
| Titan 8700 | — | — | ILS-10 |
Note: Brightness/resolution are taken from the model database (refer to the nameplate/user manual on the unit); lens compatibility is determined by the lens mount and panel/chip size on the projector. For models not listed, please contact Zorsika technical support for verification.
About This Original Lens
The ILS-10 is an original Long Throw lens manufactured by Digital Projection. Its optical structure, lens coatings, and body tolerances are matched to original machine standards, ensuring plug-and-play installation and stable imaging. For installation environments with limited projection distance (e.g., large images from short distances, ultra-short-throw wall-mounted setups), choosing the right throw ratio is more critical than opting for a generic lens.
This lens offers a throw ratio of 6.20-9.30:1 (ultra-long throw). Throw ratio = projection distance ÷ image width: a smaller value means a larger image (ideal for short distances and small spaces), while a larger value requires a greater installation distance. Calculate the required throw ratio range based on your installation distance and screen size, then match it to this model.
Genuine Product and Purchasing Information
Zorsika supplies the genuine Digital Projection original lens ILS-10 through authorized channels, complete with original packaging and traceable serial numbers, suitable for bulk procurement and project supply in installation projection, conference rooms, classrooms, and similar projects.
- Genuine Product Guarantee: Sourced through official OEM channels, with original packaging and serial numbers; for bulk projects, channel documentation can be requested to rule out refurbished or unverified units.
- Compatibility Verification: Provide the projector model before ordering, and Zorsika technical support will cross-check against the compatible model list above to ensure a proper fit.
- Project Supply: The ILS-10 covers 2 projector models; common projects can be scheduled in advance to shorten lead times.
- Alternative Options: If budget is a concern, Zorsika also offers equivalent replacement lenses with key specifications benchmarked to OEM standards, allowing you to choose as needed.
Note: Actual imaging performance is affected by projector condition and installation environment; it is recommended to test one unit before large-volume orders.
FAQ
Q: How do I choose between an original lens and a replacement lens?
A: Original lenses are manufactured by Digital Projection, with optical parameters and body tolerances calibrated to original machine standards, making them ideal for projects with strict OEM consistency requirements. Zorsika replacement lenses are independently designed and manufactured to the same specifications, with throw ratio, image circle, and mount matched to the original, offering advantages in budget and lead time. Zorsika supplies both options—choose based on your project requirements.
Q: How do I confirm this lens works with my projector?
A: Compatibility is determined by the lens mount and panel/chip size on the projector; verified compatible models are listed in this article. Projectors of the same generation and brand often share the same mount—if unsure, photograph the nameplate and send it to Zorsika technical support for confirmation.
Q: How do I choose the throw ratio?
A: Throw ratio = projection distance ÷ image width. A smaller value means a larger image (short-throw/ultra-short-throw for close distances and small spaces), while a larger value requires a greater installation distance. Calculate the required throw ratio range based on your installation distance and screen size, then match it to this model's focal length range.
Q: How can I be sure the ILS-10 is genuine?
A: Zorsika supplies genuine products through OEM channels, with original packaging and traceable serial numbers; for bulk projects, channel documentation can be requested to ensure the lens is not refurbished or from second-hand disassembled units.
Q: What should I pay attention to when replacing the lens?
A: Always power off the projector and wait for the cooling fan to stop before removing or installing the lens; hold the lens barrel without touching the glass, use a blower for dust; after installation, test focus before tightening the locking screws, and clean the mount and contacts as you go.
Q: What is the warranty period for the lens?
A: Zorsika provides a 12-month warranty on all projector lenses; for normal use and non-man-made damage (e.g., impact, water ingress, unauthorized disassembly), contact after-sales service directly. The warranty period is based on the shipping invoice date.
Related Inquiry Portals
- Zorsika Technical Support Center
- Projector Brand and Compatible Model Lookup
- Projector Lamp / Lens / Air Filter Product Library
Purchasing Consultation
For consultation on the Digital Projection original lens ILS-10, project proposals, or the full compatible model list, please contact us through the following channels:
- Website: www.zorsika.com
- Phone: 0086-20-38551187
- Email: sales@zorsika.com
- Business Hours: Monday to Friday, 9:00-18:00
The lens model and compatible projector data in this article are sourced from OEM documentation and the Zorsika product database, and are continuously updated; final confirmation is subject to actual inquiry.