Optoma BL-FS180A Projector Lamp — Full Compatibility List for 18 Models & Selection Guide

When replacing an Optoma projector lamp, the most time-consuming part is often not the installation itself, but confirming the model number matches. The BL-FS180A covers 18 Optoma projector models. This article lists the specifications, compatible models, and key verification points all in one place.

Lamp Module Specifications

The above specifications are from the Zorsika product database. For the full technical datasheet, please contact our sales team.

Compatible Models: 18 Optoma Projectors

The following verified compatible Optoma projector models for the BL-FS180A are listed below, separated by commas:

DS302，EX990S，DS303，SP7600，CP705，FS704，DX602，EP709，EP709S，EP706，EP706S，DX609，DX603，DV11，U2，U3，DVD100，LS718

Note: Projectors from the same generation often share the same lamp module. For models not listed, please contact Zorsika technical support for confirmation.

Three Points to Verify Before Purchase

1. Check the Nameplate Model: Open the projector's lamp door and ensure the model on the lamp module label matches BL-FS180A exactly. Some Optoma models may have suffixes like -V or +, but the lamp module is usually interchangeable. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the Lamp Type: The same model comes in four forms: original packaged, original bare, replacement, and used. These four forms differ significantly. An original bare lamp uses an original arc tube with a third-party housing, typically offering the best overall value. Be sure to clearly specify which type you want on your order to avoid disputes upon delivery.
3. Verify Physical Specifications: The reflector size 00X51D and arc gap must match the original lamp. If any of these parameters do not match, the lamp may not fit or may fail to ignite.

Why Choose Zorsika PRO for the Same Specifications

For high-volume standard lamp modules like the BL-FS180A, the Zorsika PRO series offers replacement options with the same specifications as the original. Power, arc gap, and reflector size are matched point-by-point against the original, and each unit is individually tested before shipping, ensuring plug-and-play installation without any structural modifications.

• Specification Matching: Power, arc gap, and reflector size are matched point-by-point to original parameters
• Individual Testing: Each lamp is individually tested before shipping, ensuring brightness and stability
• Warranty Commitment: 180-day warranty on lamps; normal use failures not caused by human error are covered by after-sales service
• Stable Supply: Supports bulk purchasing and project-based supply

In short: if you want original quality but also want a more hassle-free overall experience, the Zorsika PRO series projector lamps are designed exactly for this scenario.

Note: Performance such as brightness and lifespan is significantly affected by projector condition, operating environment, and cooling. Zorsika does not make uniform numerical promises. We recommend testing 1-2 sample units before bulk purchasing.

Daily Maintenance to Extend Lamp Life

• Clean Dust Regularly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in normal office environments, every 3-6 months.
• Use Eco Mode Wisely: Prioritize eco mode when brightness is sufficient, as it reduces the thermal load on the lamp.
• Avoid Frequent On/Off Cycles: Thermal cycling is a major source of lamp wear. If the projector won't be used for a short period, use the blank/AV mute function instead of repeatedly powering off.
• Proper Shutdown: Always wait for the cooling fan to stop before unplugging power after shutdown. Powering off while hot causes sudden cooling of the lamp, a common cause of lamp rupture.
• Reset Lamp Hours After Replacement: Be sure to reset the lamp hour counter in the menu after installing a new lamp; otherwise, the projector will continue to alarm based on the old timer.

FAQ

Q: My projector is not on the list of 18 models above. Can I use the BL-FS180A?

A: The list represents verified models, not an exhaustive list. Optoma projectors from the same generation often share lamp modules. Take a photo of the projector nameplate and the original lamp label and send it to Zorsika technical support, and we can help confirm compatibility.

Q: How do I choose between original packaged, original bare, and replacement lamps?

A: If you prioritize brightness stability and long-term reliability, the Zorsika PRO series lamps are the first choice—they match original parameters point-by-point, are individually tested before shipping, offer performance comparable to the original with a more hassle-free experience, and come with a 180-day warranty. For standard education, business, and conference room use, the PRO series is also the more reliable choice overall. While other replacement lamps are cheaper, the quality of the arc tube source and quality control varies significantly, leading to higher risks of brightness decay and shortened lifespan. They are only recommended for temporary backup projectors.

Q: Why choose Zorsika PRO instead of the original?

A: The core philosophy of the Zorsika PRO series lamps is "original parameters, independent quality control": power, arc gap, and reflector size are matched point-by-point to the original, but with an additional individual ignition test before shipping and a 180-day warranty. Compared to the original, it offers a more hassle-free overall experience; compared to other alternatives, quality control is more consistent.

Q: What should I do if the projector shows "lamp not recognized" after replacement?

A: First, confirm whether the lamp hour reset was performed—most such messages are caused by an uncleared timer. If the error persists after resetting, contact Zorsika technical support. We provide reset instructions and troubleshooting guidance for the corresponding models.

Q: Is there an installation tutorial for the BL-FS180A?

A: Yes. The lamp door location and installation steps for these Optoma models are essentially the same. Contact Zorsika sales to obtain illustrated or video tutorials for the corresponding models.

Q: How long is the lamp warranty?

A: Zorsika PRO series projector lamps come with a 180-day warranty. Normal use failures not caused by human error (such as lamp rupture or abnormal early brightness decay) are covered by after-sales service. Brightness decay within standard ranges is considered normal wear and tear and is not covered by the warranty.

Related Inquiry Portals

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Purchase Inquiries

For consultation on the Optoma BL-FS180A, bulk pricing, or a complete list of compatible models, please contact us through the following channels:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article are from the Zorsika product database. Data is continuously updated; please confirm with actual quotations.