Optoma BL-FS300A Lamp Quick Reference: Specs + 1 Compatible Model

When buying a lamp for an Optoma projector, check the model first before anything else. Here's a quick reference for the BL-FS300A specifications and its 1 compatible projector model.

Specifications of This Lamp

The above specifications are sourced from the Zorsika product database. Contact our sales team for the full technical datasheet.

Compatibility: 1 Optoma Model List

The following verified compatible Optoma projector models for the BL-FS300A are listed below, separated by commas:

EP759

Note: Projectors from the same generation often share the same lamp module. For models not listed, contact Zorsika technical support for confirmation.

What the Zorsika PRO Series Offers You

For high-volume standard lamp modules like the BL-FS300A, the Zorsika PRO Series provides replacements that match original specifications. Power, arc gap, and reflector size are matched point-by-point against the original, and every unit is tested before shipment—ready to install without any structural modifications.

• Specification Matching: Power, arc gap, and reflector size are matched point-by-point to original parameters
• Individual Testing: Every lamp is lit and tested before shipment, ensuring brightness and stability
• Warranty Commitment: 180-day warranty on lamps; non-artificial damage during normal use is covered by after-sales service
• Stable Supply: Supports bulk purchasing and project-based supply

In short: if you want original quality but with greater peace of mind overall, the Zorsika PRO Series projector lamp is designed exactly for this scenario.

Note: Brightness and lifespan performance are significantly affected by projector condition, usage environment, and cooling. Zorsika does not make uniform numerical promises. We recommend testing 1-2 sample units before bulk purchasing.

FAQ

Q: Why choose Zorsika PRO instead of the original?

A: The core logic behind the Zorsika PRO Series is "original parameters, our own quality control": power, arc gap, and reflector size are matched point-by-point to the original, but with an additional individual lighting test before shipment and a 180-day warranty. Compared to the original, it's more hassle-free overall; compared to other alternatives, quality control is more consistent.

Q: How do I choose between original packaged, original bare, and replacement lamps?

A: If you prioritize brightness stability and long-term reliability, the Zorsika PRO Series is the first choice—matched point-by-point to original parameters, individually tested before shipment, with performance comparable to the original and greater peace of mind, plus a 180-day warranty. For standard business, education, and conference room use, the PRO Series is also the more reliable option. While other replacement lamps cost less, the arc tube source and quality control vary significantly, increasing the risk of brightness decay and shortened lifespan—these are only recommended for temporary backup units.

Q: What if the projector shows "lamp not recognized" after replacement?

A: First, confirm whether the lamp hour counter has been reset—most such alerts are caused by an uncleared timer. If the error persists after resetting, contact Zorsika technical support; we provide reset methods and troubleshooting guidance for the corresponding models.

Q: My projector isn't in the 1-model list above. Can I use the BL-FS300A?

A: The list covers verified models but is not exhaustive. Optoma projectors from the same generation often share lamp modules. Take photos of the nameplate and original lamp label and send them to Zorsika technical support, and we'll help confirm compatibility.

Q: Is there an installation guide for the BL-FS300A?

A: Yes. The lamp door location and disassembly steps for these Optoma models are essentially the same. Contact Zorsika sales to get illustrated or video guides for the corresponding models.

Q: How long is the lamp warranty?

A: The Zorsika PRO Series projector lamp comes with a 180-day warranty. Normal use with non-artificial damage (such as lamp explosion or abnormal early light decay) is covered by after-sales service. Brightness decay within standard ranges is considered normal wear and tear and is not covered by the warranty.

Before Ordering, Verify These Three Things

1. Check the Nameplate Model: Open the projector lamp door and confirm the model on the lamp module label matches BL-FS300A exactly. Some Optoma models may have suffixes like -V or +, but the lamp module is usually interchangeable. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the Lamp Form: The same model comes in four forms—original packaged, original bare, replacement, and used—which differ significantly. Original bare means an original arc tube with a third-party housing, typically offering the best overall value. Be sure to specify which form you want clearly on the order to avoid disputes upon delivery.
3. Verify Physical Specifications: Reflector size 56X56D, socket E21.8, and arc gap must match the original lamp. If any of these don't align, the lamp may not fit or may fail to light.

After Replacing the Lamp, Keep These Points in Mind

• Clean Dust Regularly: Dust buildup on air intakes and filters directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in normal office environments, every 3-6 months.
• Use Eco Mode Wisely: Prioritize eco mode when brightness is sufficient, as it reduces thermal load on the lamp.
• Avoid Frequent On/Off Cycles: Thermal cycling is a major source of lamp wear. If the projector won't be used for a short period, use the shutter/blank function instead of repeatedly cutting power.
• Shut Down Properly: Always wait for the cooling fan to stop before cutting power. Powering off while the lamp is hot causes rapid cooling and is a common cause of lamp explosion.
• Reset the Lamp Timer: After installing a new lamp, be sure to reset the lamp hour counter in the menu; otherwise, the projector will continue to alert based on the old timer.

Related Search Entries

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Purchase Inquiries

For consultation on the Optoma BL-FS300A, bulk pricing, or a complete compatibility list, contact us through the following channels:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatibility data in this article are sourced from the Zorsika product database. Data is continuously updated; final confirmation is subject to actual inquiry.