Panasonic ET-LAD120W Projector Lamp Compatible with PT-FDZ97C/CL/PT-DZ870 PT-FDX110C/CL/PT-DX100

Compatible Models: 3 Panasonic Projector Models

The following are verified compatible projector models for ET-LAD120W in Panasonic projectors, model numbers separated by commas:

PT-FDZ97C/CL/PT-DZ870, PT-FDX110C/CL/PT-DX100, PT-FDW93C/CL/PT-DW830

Note: Projectors of the same generation often share the same lamp module. For models not on the list, please contact Zorsika technical support for confirmation.

Lamp Specifications

Specifications above are sourced from Zorsika product database. Contact your sales representative for complete technical specifications.

Frequently Asked Questions

Q: The machine shows "lamp not recognized" after replacement. What should I do?

A: First confirm whether the lamp timer was reset. Most of these prompts are caused by uncleared timers. If the error persists after reset, contact Zorsika technical support – we provide reset methods and troubleshooting guides for corresponding models.

Q: How to choose between OEM package, bare lamp, or alternative?

A: For stable brightness and long-term reliability, the Zorsika PRO series lamp is the top recommendation – each parameter matched to OEM specs, with every unit tested before shipping, performance on par with OEM and more cost-effective overall. For regular business, education, and meeting room use, PRO series also offers better overall value. Other alternative lamps have lower cost but vary significantly in arc tube quality and quality control, with higher risks of brightness degradation and shorter lifespan – only recommended for temporary backup use.

Q: Why choose Zorsika PRO over OEM?

A: The core logic behind Zorsika PRO series is "OEM specs, self-controlled quality": power, arc gap, and reflector size matched item by item to OEM specs, plus one additional step – every unit undergoes lighting test before shipping, with 180-day warranty. Compared to OEM, it's more cost-effective overall; compared to other alternatives, quality control is more stable.

Q: Is there an installation guide for ET-LAD120W?

A: Yes. The lamp door position and disassembly/reassembly steps are essentially consistent across these Panasonic models. Contact Zorsika sales to get illustrated or video tutorials for the corresponding model.

Q: What is the warranty period for the lamp?

A: Zorsika PRO series projector lamps offer 180-day warranty. Normal use with non-human damage (such as lamp explosion, abnormal early brightness decay) qualifies for after-sales service; brightness decay within standard range is considered normal usage wear and tear, not covered by warranty.

Same Specs, Why Recommend Zorsika PRO

For high-demand standard lamp modules like ET-LAD120W, Zorsika PRO series provides OEM-spec alternative solutions. Power, arc gap, and reflector size are matched item by item to OEM specs, with every unit tested before shipping – ready to install without any structural modifications.

• Spec Matching: Power, arc gap, and reflector size matched item by item to OEM specs
• Unit Testing: Every unit undergoes lighting test before shipping – guaranteed brightness and stability
• Warranty Commitment: 180-day warranty on lamps, after-sales service for normal use non-human damage
• Stable Supply: Supports bulk purchasing and project procurement

In short: If you want OEM-level quality with better overall value, Zorsika PRO series projector lamps are designed exactly for this scenario.

Note: Brightness, lifespan and other performance are greatly affected by machine condition, usage environment, and heat dissipation. Zorsika does not make unified numerical commitments. It is recommended to test 1-2 sample units before bulk procurement.

Regular Maintenance to Extend Lamp Life

• Clean Dust Promptly: Dust buildup on the air intake and filter will directly raise the lamp operating temperature. In dusty environments, clean once every 1-2 months; in normal office environments, once every 3-6 months.
• Use Eco Mode: Prioritize eco mode when brightness is sufficient, as it reduces lamp thermal load.
• Avoid Frequent Switching: Thermal cycling is a major cause of lamp wear. If not using for a short period, use the shutter function instead of repeatedly turning the power on and off.
• Proper Shutdown: Always wait for the fan to stop after powering off before disconnecting power. Hot shutdown causes rapid lamp cooling, a common cause of lamp failure.
• Reset After Replacement: After installing a new lamp, be sure to reset the lamp timer in the menu; otherwise, the machine will continue to alarm based on the old timer.

Related Search

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Search
• Projector Lamp / Lens / Air Filter Product Library

Purchase Inquiry

For consultation, bulk orders, or complete compatible model list of Panasonic ET-LAD120W, please contact us through:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

Lamp module model, specifications, and compatible projector model data in this article are sourced from the Zorsika product database, which is continuously updated. Actual pricing confirmation shall prevail.