Sony LMP-D200 Projector Lamp Compatible Models: VPL-DX10 VPL-DX15 VPL-DX11 Original Replacement

No need to read the manual: the core specifications of the Sony LMP-D200 projector lamp, 3 compatible projector models, and the three things you should confirm before purchasing are all covered in this article.

Specifications at a Glance

The specifications above are from the Zorsika product database. Contact our sales team for the full technical datasheet.

Where It Fits: 3 Compatible Sony Models

The following verified compatible Sony projector models for the LMP-D200 are listed below, separated by commas:

VPL-DX10, VPL-DX15, VPL-DX11

Note: Projectors from the same generation often share the same lamp module. For models not listed, contact Zorsika technical support for confirmation.

What the Zorsika PRO Series Offers You

For high-volume standard lamp modules like the LMP-D200, the Zorsika PRO Series provides replacements that match original specifications. Power, arc gap, and reflector size are matched item by item against the original, and every unit is lit-tested before shipping — install and go, no structural modifications needed.

• Spec-matched: Power, arc gap, and reflector size are matched item by item to original parameters
• Unit-tested: Every lamp is lit-tested before shipping, ensuring brightness and stability
• Warranty commitment: 180-day warranty on lamps; non-artificial damage under normal use is covered by after-sales service
• Stable supply: Supports bulk orders and project-based supply

In short: if you want original-quality performance but a more hassle-free overall experience, the Zorsika PRO Series projector lamp is built exactly for this scenario.

Note: Brightness and lifespan performance are significantly affected by projector condition, operating environment, and cooling. Zorsika does not make uniform numerical commitments. We recommend testing 1-2 sample units before placing a bulk order.

Questions You Might Have

Q: Why choose Zorsika PRO instead of the original?

A: The core logic behind the Zorsika PRO Series is "original parameters, self-managed quality control": power, arc gap, and reflector size are matched item by item to the original, but with an additional unit-by-unit lit test before shipping and a 180-day warranty. Compared to the original, it's more hassle-free overall; compared to other alternatives, quality control is more consistent.

Q: How do I choose between original packaged, original bare, and replacement?

A: If you prioritize stable brightness and long-term reliability, go with the Zorsika PRO Series lamp — matched item by item to original parameters, lit-tested before shipping, performance on par with the original, more hassle-free overall, and backed by a 180-day warranty. For standard business, education, and conference room use, the PRO Series is also the more worry-free choice. While other replacement lamps cost less, the arc tube source and quality control vary widely, with higher risks of brightness decay and shortened lifespan — they are only recommended for temporary backup units.

Q: What if the projector shows "lamp not recognized" after replacement?

A: First, check whether the lamp hour counter has been reset — most alerts are caused by an uncleared timer. If the error persists after resetting, contact Zorsika technical support, and we'll provide reset instructions and troubleshooting guidance for your specific model.

Q: My projector isn't in the 3-model list above. Can I still use the LMP-D200?

A: The list covers verified models but is not exhaustive. Sony projectors from the same generation often share lamp modules. Send a photo of the projector nameplate and the original lamp label to Zorsika technical support, and we'll help confirm compatibility.

Q: Is there an installation guide for the LMP-D200?

A: Yes. The lamp door location and disassembly steps are largely the same across these Sony models. Contact Zorsika sales to get illustrated or video tutorials for your specific model.

Q: How long is the lamp warranty?

A: Zorsika PRO Series projector lamps come with a 180-day warranty. Normal use with non-artificial damage (e.g., lamp burst, abnormal early light decay) is covered by after-sales service. Brightness decay within standard ranges is considered normal wear and tear and is not covered.

Before Ordering, Verify These Three Things

1. Check the nameplate model: Open the projector lamp door — the model on the lamp module label must match LMP-D200 exactly. Some Sony models have suffixes like -V or +, but the lamp module is usually interchangeable. When in doubt, send a photo of the nameplate to Zorsika technical support for confirmation.
2. Confirm the lamp form: The same model comes in four forms — original packaged, original bare, replacement, and used — and they differ significantly. Original bare (original arc tube with a third-party frame) typically offers the best overall value. Be sure to specify which form you want clearly on the order to avoid disputes upon delivery.
3. Verify physical specifications: Reflector size 45X45L, socket E18.5, and arc gap must match the original lamp exactly. If any of these don't match, the lamp may not fit or may fail to light.

After Replacing the Lamp, Keep These Points in Mind

• Clean dust regularly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in normal office environments, every 3-6 months.
• Make good use of eco mode: This lamp supports dual power modes of 220W / 160W. Switching to eco mode for everyday presentations significantly reduces the lamp's thermal load.
• Avoid frequent on/off cycles: Thermal cycling is one of the main sources of lamp wear. If the projector won't be used for a short period, use the shutter/blank function instead of repeatedly cutting power.
• Shut down properly: After powering off, wait for the fan to stop before disconnecting power. Cutting power while hot causes sudden cooling of the lamp — a common cause of lamp burst.
• Reset the lamp hour counter after replacement: Be sure to reset the lamp hour counter in the menu after installing a new lamp; otherwise, the projector will keep alerting based on the old timer.

Related Support Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Purchase Inquiries

For consultation on the Sony LMP-D200, bulk solutions, or a full list of compatible models, contact us through the following channels:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module model, specifications, and compatible model data in this article are from the Zorsika product database. Data is continuously updated; final confirmation is subject to actual quotation.