Sony LMP-D213 Projector Lamp Compatible Models: VPL-DX145 VPL-DX125 VPL-DW125 VPL-DX140 VPL-DX126

No need to read the manual: the core specifications of the Sony LMP-D213 projector lamp, 8 compatible projector models, and the three things you should confirm before purchasing are all covered in this article.

Specifications at a Glance

The above specifications are sourced from the Zorsika product database. For the full technical datasheet, please contact our sales team.

Compatible Models: 8 Sony Projectors

The following verified compatible Sony projector models for the LMP-D213 are listed below, separated by commas:

VPL-DX145, VPL-DX125, VPL-DW125, VPL-DX140, VPL-DX126, VPL-DX146, VPL-DX120, VPL-DX100

Note: Projectors of the same generation often share the same lamp module. For models not listed, please contact Zorsika technical support for confirmation.

What the Zorsika PRO Series Offers You

The Zorsika PRO Series provides replacement lamp modules for the LMP-D213 with the same specifications as the original, with every key parameter matched against the original, supporting project supply and bulk purchasing with more reliable lead times.

• Specification matching: Power, arc gap, and reflector size are matched item by item against original parameters
• Individually tested: Each lamp is lit and tested before shipping to ensure brightness and stability
• Warranty commitment: 180-day warranty on lamps; non-artificial damage under normal use is covered by after-sales service
• Stable supply: Supports bulk purchasing and project supply

In short: if you want original quality but with greater peace of mind overall, the Zorsika PRO Series projector lamp is designed exactly for this scenario.

Note: Brightness and lifespan performance are significantly affected by projector condition, operating environment, and cooling conditions. Zorsika does not make uniform numerical commitments. We recommend testing 1-2 samples before bulk purchasing.

Questions You May Have

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO Series lamps is "original parameters, self-controlled quality": power, arc gap, and reflector size are matched item by item against the original, but with an additional individual lighting test before shipping and a 180-day warranty. Compared to the original, it offers greater peace of mind overall; compared to other alternatives, quality control is more consistent.

Q: How do I choose between original packaged, original bare, and replacement lamps?

A: If you prioritize brightness stability and long-term reliability, the Zorsika PRO Series lamp is the first choice—matched item by item against original parameters, individually lit and tested before shipping, with performance comparable to the original and greater peace of mind overall, plus a 180-day warranty. For regular commercial, educational, and conference room use, the PRO Series is also the more worry-free option. While other replacement lamps are cheaper, the arc tube source and quality control vary significantly, with higher risks of brightness decay and shortened lifespan. They are only recommended for temporary backup units.

Q: What should I do if the projector shows "lamp not recognized" after replacement?

A: First, check whether the lamp hour reset has been performed—most such prompts are caused by an uncleared timer. If the error persists after resetting, contact Zorsika technical support, and we will provide the reset method and troubleshooting guidance for your model.

Q: My projector is not on the list of 8 models above. Can I use the LMP-D213?

A: The list covers verified models but is not exhaustive. Sony projectors of the same generation often share the same lamp module. Take a photo of the nameplate on the projector and the original lamp label and send it to Zorsika technical support, and we can help confirm compatibility.

Q: Is there an installation guide for the LMP-D213?

A: Yes. The lamp door location and disassembly/assembly steps for these Sony models are basically the same. Contact Zorsika sales to get illustrated or video guides for your specific model.

Q: How long is the lamp warranty?

A: The Zorsika PRO Series projector lamp comes with a 180-day warranty. Normal use and non-artificial damage (such as lamp explosion or abnormal early light decay) are covered by after-sales service. Brightness decay within the standard range is considered normal wear and tear and is not covered by the warranty.

Purchasing Pitfalls: Three Key Checks

1. Check the nameplate model: Open the projector lamp door and verify that the model on the lamp module label matches LMP-D213 exactly. Some Sony models may have suffixes like -V or +, but the lamp module is usually interchangeable. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp form: The same model comes in four forms—original packaged, original bare, replacement, and used—and they differ significantly. Original bare lamps pair an original arc tube with a third-party lamp frame and typically offer the best overall value. Be sure to clearly specify which form you want on your order to avoid disputes upon delivery.
3. Verify physical specifications: The reflector size (50X50L), socket/base (E19.4), and arc gap must all match the original lamp. If any of these do not match, the lamp may not fit or may fail to light.

Points to Note After Replacing the Lamp

• Clean dust regularly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in normal office environments, every 3-6 months.
• Make good use of eco mode: This lamp supports dual power modes of 210W / 140W. Switching to eco mode for everyday presentations can significantly reduce the thermal load on the lamp.
• Avoid frequent on/off switching: Thermal cycling is one of the main causes of lamp wear. If the projector will not be used for a short period, use the shutter/blank function instead of repeatedly powering off.
• Shut down correctly: After powering off, wait for the cooling fan to stop completely before disconnecting power. Powering off while the lamp is still hot causes sudden cooling, which is a common cause of lamp explosion.
• Reset the lamp timer after replacement: After installing a new lamp, be sure to reset the lamp hour counter in the menu; otherwise, the projector will continue to alert based on the old timer.

Related Search Entries

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Purchasing Inquiries

For consultation on the Sony LMP-D213, bulk solutions, or a complete list of compatible models, please contact us through the following channels:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module model, specifications, and compatible model data in this article are sourced from the Zorsika product database. Data is continuously updated; please confirm with actual quotations.