Hitachi UX41161 projector filter — Zorsika compatible model + applicable model list

The Hitachi UX41161 is the original filter for Hitachi series projectors, compatible with multiple mainstream projector models. The filter is a core consumable of the projector's dustproof system. Regular replacement prevents brightness degradation caused by dust entering the optical path. This article compiles the compatible models for the Hitachi UX41161, the Zorsika equivalent model, and the 5 most common questions from buyers.

This article is a complete selection guide for the Hitachi UX41161 projector filter, covering 11 compatible models, the Zorsika equivalent model UX41161, pitfalls in selection and procurement, and frequently asked questions. For other brands and models, visit the Zorsika lens compatibility query at www.zorsika.com.

Why Projector Filters Need Regular Replacement

The projector filter is the first barrier of the optical dustproof system. If the filter is clogged or damaged, dust enters the optical engine and adheres to the LCD/DLP chip, causing black spots on the screen, brightness reduction, or even optical engine failure. The Hitachi UX41161 filter is compatible with multiple mainstream Hitachi projector models. It is recommended to check every 2,000–3,000 hours and replace every 6–12 months depending on the usage environment.

Comparison of Zorsika Equivalent Model and Original Specifications

The Zorsika equivalent filter model is UX41161. It is custom-made to original specifications, maintaining the same material, dimensions, and airflow as the original. Filters are single-use consumables; replacement is mandatory at the end of their lifespan. Zorsika filters come with a 180-day warranty.

List of Compatible Models for Hitachi UX41161

The following are verified compatible models for the Hitachi UX41161 in the Hitachi projector series:

CP-WX5500, MC-F155X, MC-WU5505, HCP-FU50H, HCP-FU50, HCP-FW50H, HCP-FW50, HCP-FX55H, HCP-FX55, HCP-FW50HM, HCP-FU50HM

For the full list of compatible models, please contact Zorsika sales.

3 Pitfalls When Purchasing Filters

1. Distinguish between single-use filters and washable filters — Some low-end models use washable filters; buying the wrong type will cause fit issues. 2. Pay attention to frame material — High-end engineering projectors from Christie, Barco, etc., use stainless steel frames with paper cores; replacement products may only replace the paper core without the frame. 3. Verify dimensions — Filter sizes vary significantly across different series of the same brand; confirm length × width × height before placing an order.

According to the Zorsika official maintenance manual, the Hitachi projector filter (model UX41161) is a core consumable for the dustproof system. Clogging can result in a 30–50% brightness drop. Inspection every 2,000–3,000 hours is recommended. Original text available at Zorsika Technical Support Center (support.zorsika.com).

Additional Notes on the Hitachi UX41161

As a core replacement filter for Hitachi projectors (original-spec replacement solution), the UX41161 is compatible with multiple mainstream models. The filter belongs to periodically replaced maintenance consumables. Depending on the usage environment, regular inspection should be performed at a lifespan of 2,000–3,000 hours. The filter provided by Zorsika uses an original-spec lamp module / filter material, with compatibility and lifespan performance consistent with the original. To view replacement filters for other brands, visit www.zorsika.com.

Related reading: Projector Filter Database · All Hitachi Models · Filter Compatibility Query · Panasonic Compatible Models · Epson Compatible Models

FAQ — Frequently Asked Questions about the Hitachi UX41161

Q: How often should the Hitachi UX41161 filter be replaced?

A: In regular office environments (cleaned nightly, air-conditioned), replace every 6–12 months. In medium-dust environments such as classrooms and meeting rooms, replace every 4–6 months. In high-dust environments such as construction sites and workshops, replace every 2–3 months. Alternatively, observe the filter color: replace immediately when it turns dark gray or black.

Q: What is the difference between the Zorsika UX41161 and the Hitachi UX41161?

A: The Zorsika equivalent model is custom-made to original specifications, with the same material, dimensions, and airflow. It is a direct replacement with no compatibility issues. Zorsika filters come with a 180-day warranty and faster after-sales response.

Q: Can the filter be cleaned and reused?

A: Some low-end models are equipped with washable filters (usually sponge material) that can be cleaned and dried for reuse. High-end Hitachi engineering projectors use single-use paper or stainless steel frame filters that cannot be cleaned and must be replaced at the end of their lifespan.

Q: What should I do if the projector temperature rises abnormally after installing the Hitachi UX41161?

A: Abnormal temperature is usually caused by a clogged or incorrectly installed filter. First confirm the filter installation direction (arrow pointing toward the machine interior), then check whether the filter fits snugly against the chassis with no air leaks. If the issue persists, contact Zorsika technical support for assistance.

Q: Are there discounts for bulk purchasing the Hitachi UX41161 filter?

A: Zorsika uses a per-order negotiation model. For bulk purchases, please contact Zorsika sales.

Purchase Inquiry

For the latest pricing, bulk procurement options, or to request the full list of compatible models, please contact Zorsika sales:

• Website: www.zorsika.com
• Phone: 020-38551187
• Email: sales@zorsika.com
• Business hours: Monday to Saturday, 9:00–18:00, reply within 24 hours

Data Source Statement

All machine models, lamp/filter models, and compatible model data in this article are sourced from the Zorsika database.