Barco R9841100 Projector Lamp Compatible with iQ G300 iQ R300 OEM Replacement

Lamp Module Specifications

Specifications above are from Zorsika product database. Contact your sales representative for complete technical datasheets.

Compatible Projector Models: 2 Barco Models

Verified compatible projector models for R9841100 in Barco projectors, models separated by commas:

iQ G300, iQ R300

Note: Projectors from the same generation often share the same lamp module. For models outside this list, contact Zorsika technical support for confirmation.

Procurement Tips: Three Key Verification Points

1. Verify nameplate model: Open the projector lamp door and check that the model on the lamp module label matches R9841100 exactly. Some Barco models may have suffixes like -V or + but the lamp module is usually interchangeable. When unsure, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm lamp configuration: The same model is available in four configurations: factory sealed, bare lamp, replacement, and used. These vary significantly. Bare lamp means an OEM lamp core with third-party housing, offering the best value. Be sure to specify which configuration you need on your order to avoid disputes upon delivery.
3. Verify physical specifications: Reflector size 65X70L and arc gap must match the original lamp. Any mismatch may result in installation failure or the lamp failing to ignite.

Same Specifications—Why Choose Zorsika PRO

For high-volume standard lamp modules like R9841100, Zorsika PRO series provides OEM-spec replacement solutions. Power, arc gap, and reflector size are matched item by item to original specifications. Every lamp undergoes individual ignition testing before shipping—ready for installation without any structural modifications.

• Specification match: Power, arc gap, and reflector size matched to OEM specifications item by item
• Individual testing: Each lamp undergoes ignition testing before shipping for guaranteed brightness and stability
• Warranty commitment: 180-day warranty on lamps; after-sales service available for non-human damage under normal use
• Stable supply: Supports bulk procurement and project fulfillment

In short: If you want OEM-level quality but prefer a more convenient overall experience, Zorsika PRO series projector lamps are designed for exactly this scenario.

Note: Brightness, lifespan, and other performance characteristics are heavily influenced by machine condition, usage environment, and thermal management. Zorsika does not make unified numerical commitments. We recommend ordering 1-2 sample lamps for ignition testing before placing bulk orders.

Daily Maintenance: Extending Lamp Life

• Clean Dust Regularly: Dust accumulation on the air intake and filter directly raises lamp operating temperature. In dusty environments, clean every 1-2 months; for standard office environments, every 3-6 months.
• Use Eco Mode: Prioritize eco mode when brightness is sufficient, as it reduces lamp thermal load.
• Avoid Frequent Switching: Thermal cycling is a major cause of lamp degradation. For brief periods of non-use, use the blank/shutter function instead of repeatedly turning the power off.
• Proper Shutdown: Always wait for the fan to stop before cutting power. Shutting down while the lamp is hot causes rapid cooling, a common cause of lamp failure.
• Reset Timer After Replacement: After installing a new lamp, be sure to reset the lamp timer in the menu; otherwise the machine will continue to alarm based on the old timer.

Frequently Asked Questions

Q: My machine is not on the two model lists above. Can I use R9841100?

A: The lists contain verified models but are not exhaustive. Barco products from the same generation often share the same lamp module. Take photos of the machine nameplate and original lamp label and send them to Zorsika technical support for compatibility confirmation.

Q: Original packaged, original bare, or compatible—how do I choose?

A: If you prioritize brightness stability and long-term reliability, the Zorsika PRO Series lamp is the top choice—each parameter matched to OEM specs, with every unit individually tested before shipping, delivering OEM-level performance with greater peace of mind and a 180-day warranty. For standard business, education, and meeting room use, the PRO Series is also the more cost-effective option overall. Other compatible lamps may cost less, but lamp core sources and quality control vary significantly, with higher risks of brightness decay and shortened lifespan; they are only recommended for temporary backup units.

Q: Why choose Zorsika PRO over OEM?

A: The core logic of Zorsika PRO Series is "OEM specs, independent quality control": wattage, arc gap, and reflector size are matched item by item to OEM standards, with an additional step of individual unit testing before shipping and a 180-day warranty. Compared to OEM, it offers greater overall convenience; compared to other compatible options, it delivers more stable quality control.

Q: The machine shows "lamp not recognized" after replacement. What should I do?

A: First confirm whether the lamp timer was reset. The vast majority of such prompts are caused by uncleared timers. If the error persists after resetting, contact Zorsika technical support—we provide reset methods and troubleshooting guidance for corresponding models.

Q: Is there an installation guide for R9841100?

A: Yes. The lamp door positions and disassembly/reassembly steps are essentially consistent across these Barco models. Contact Zorsika sales to receive illustrated or video tutorials for your specific model.

Q: How long is the lamp warranty period?

A: Zorsika PRO Series projector lamps provide a 180-day warranty. Normal use and non-human damage (such as lamp breakage, abnormal early brightness decline) are covered by after-sales service; brightness decay within standard range is considered normal usage wear and is not covered by the warranty.

Related Search Links

• Zorsika Technical Support Center
• Projector Brands & Compatible Models Search
• Projector Lamp / Lens / Air Filter Product Database

Procurement Inquiries

For Barco R9841100 solution inquiries, bulk pricing, or a complete compatible model list, contact us through:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

Lamp module models, specifications, and compatible model data in this article are sourced from the Zorsika product database. Data is continuously updated; actual quotations shall prevail.