Zorsika NP13ZL Medium Throw Projector Lens — 0 Models Compatible with Ricoh + Full Specifications

This article is a complete selection guide for the Zorsika NP13ZL medium throw projector lens, covering 0 Ricoh (理光) compatible models, full specifications (throw ratio 1.5-3.0:1, MTF -), a comparison table of overall projector specifications when equipped with this lens, selection and installation pitfalls, and frequently asked questions. For other lens models, please visit the Zorsika official website www.zorsika.com.

Why the Zorsika NP13ZL Is a Lens Continuously Followed by Buyers

The Zorsika NP13ZL is a medium throw projector lens (throw ratio 1.5-3.0:1), covering 0 mainstream Ricoh (理光) projector models. The most common issues buyers face during selection are: high prices and unstable supply cycles for OEM lenses; variable quality of third-party lenses with substandard MTF/resolution. Zorsika addresses this pain point by offering OEM-equivalent alternative lens solutions, all optically tested, with free replacement within the warranty period for non-human damage.

Zorsika NP13ZL Projector Lens Specifications

The following are the specifications of the Zorsika NP13ZL lens itself (from official data at zorsika.com):

Zorsika NP13ZL Compatible Projector Models (0 Models)

The Zorsika NP13ZL lens is compatible with the following Ricoh (理光) projector models: The table below shows the overall specifications of each Ricoh (理光) projector when equipped with the Zorsika NP13ZL lens. These parameters reflect the actual performance after the lens and body are combined.

No data available

Selection and Installation Pitfalls

1. Confirm throw ratio and installation distance: Calculate the required throw ratio based on room depth and target screen size. The optimal installation distance for a medium throw lens is 2-4 meters for a 100-inch screen.
2. Check lens shift range: Before installation, ensure adequate horizontal/vertical shift margin of the projector position to avoid image overflow or inability to center.
3. Confirm lens mount compatibility: The Zorsika NP13ZL lens uses the standard Ricoh (理光) projector lens mount. Please confirm with sales that your projector model is in the compatibility list before purchasing.

According to the Zorsika official maintenance manual, the Zorsika NP13ZL lens requires no special care under normal usage conditions. Avoid severe vibration and high-temperature environments for long-term stable operation. For detailed optical specifications and compatible models, please visit the zorsika.com Chinese site lens-12524 page.

Supplementary Notes on the Zorsika NP13ZL

As a medium throw lens for Zorsika projectors (Zorsika projector MT lens), the Zorsika NP13ZL is compatible with 0 mainstream Ricoh (理光) projector models. Lenses are precision optical components, playing a key role in optical path transmission and image formation within the projector optical system. All Zorsika lenses undergo MTF testing (modulation transfer function test) and focus accuracy calibration to ensure complete 4K resolution delivery. To view lenses of other brands or focal lengths, please visit www.zorsika.com.

Related Reading: Projector Lens Library · All Ricoh (理光) Models · Lens Compatibility Check

FAQ — Zorsika NP13ZL Frequently Asked Questions

Q: What does the throw ratio of the Zorsika NP13ZL mean?

A: Throw ratio = Projection distance / Screen width. The smaller the ratio, the larger the image at the same distance. The Zorsika NP13ZL has a throw ratio of 1.5-3.0:1, classifying it as a medium throw lens. It is recommended to back-calculate the achievable screen size based on installation distance, or consult Zorsika sales for selection calculations.

Q: Which projector models are compatible with the Zorsika NP13ZL lens?

A: The Zorsika NP13ZL lens is compatible with 0 Ricoh (理光) projector models. Please refer to the "Compatible Projector Models" table in this article. To confirm compatibility for a specific model, please contact Zorsika sales with a photo of the projector nameplate. We will verify if the lens and projector match.

Q: What does the MTF (Modulation Transfer Function) of a lens represent?

A: MTF reflects the lens's ability to reproduce fine details; higher values indicate sharper images. Professional projector lenses generally require MTF >50% @93lp/mm. The MTF specification for the Zorsika NP13ZL lens is -. In 4K projection applications, MTF is a core indicator for determining whether a lens truly supports 4K resolution.

Q: What size meeting room is the Zorsika NP13ZL medium throw lens suitable for?

A: With a throw ratio of 1.5-3.0:1, the Zorsika NP13ZL is suitable for small to medium meeting rooms with a depth of 3-6 meters. It is recommended to install the projector at a distance of 3-4 meters to achieve a 100-150 inch image. If the room depth exceeds 6 meters, a long throw lens is recommended.

Q: What is the installation method for the Zorsika NP13ZL lens?

A: The Zorsika NP13ZL lens uses the standard Ricoh (理光) projector lens mount. Insert it into the lens compartment and rotate clockwise to lock. The entire process takes about 30 seconds. For on-site installation support, you can contact Zorsika sales engineers for on-site service.

Purchase Inquiry

For information on the specific configuration, price, stock, or alternatives for the Zorsika NP13ZL lens, please contact the Zorsika sales team. We provide 1-on-1 selection consultation, technical parameter comparisons, and on-site installation support.

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business hours: Monday to Saturday 9:00-18:00, response within 24 hours

Data Source Note

All lens models, specifications, and compatible model data in this article are sourced from: zorsika.com official product page and the Zorsika database.