Christie 03-000649-01P Projector Lamp Compatible Models: VIVID LX26 VIVID LX35 VIVID LW25 VIVID

No need to read the manual: the core specs of the Christie 03-000649-01P projector lamp, its 7 compatible projector models, and the three things you should confirm before buying are all in this article.

Lamp Module Specifications

The above specifications come from the Zorsika product database. Contact sales if you need the complete technical datasheet.

Christie 03-000649-01P Model Compatibility List (7 Models)

The following are the verified compatible models for the 03-000649-01P among Christie projectors, with models separated by commas:

VIVID LX26, VIVID LX35, VIVID LW25, VIVID LW25U, LW25, LW25U, LW26

Note: Projectors of the same generation often share the same lamp module. For models not on the list, contact Zorsika technical support for confirmation.

What the Zorsika PRO Series Offers You

The 03-000649-01P is a relatively high-volume model. The Zorsika PRO Series applies consistency control to the arc tube according to original factory specifications, plus an additional factory lighting test, providing greater assurance of brightness and stability.

• Specification Matching: Power, arc gap, and reflector size are matched item by item to original factory specifications
• Individual Testing: Each unit is lit and tested before leaving the factory, ensuring brightness and stability
• Warranty Commitment: 180-day warranty on the lamp; normal use with non-human damage is eligible for after-sales service
• Stable Supply: Supports bulk purchasing and project supply

In one sentence: if you want original factory quality with greater overall peace of mind, the Zorsika PRO Series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is significantly affected by machine condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. We recommend obtaining 1-2 sample units for lighting tests before bulk purchasing.

Frequently Asked Questions

Q: Why choose Zorsika PRO instead of the original factory lamp?

A: The core logic of the Zorsika PRO Series lamp is "original factory specs, independent quality control": power, arc gap, and reflector size are benchmarked item by item against the original factory, but with an additional individual lighting test before leaving the factory and a 180-day warranty. Compared to the original factory, it offers greater overall peace of mind; compared to other alternatives, it offers more consistent quality control.

Q: How do I choose between original packaged, original bare, and replacement options?

A: If you prioritize brightness stability and long-term reliability, the Zorsika PRO Series lamp is the first choice—matched item by item to original factory specifications, individually lit and tested before leaving the factory, with performance benchmarked to the original factory, greater overall peace of mind, and a 180-day warranty. For routine business and education, conference room use, the PRO Series is also the more worry-free choice overall. Although other replacement lamps cost less, the arc tube sources and quality control vary widely, with higher risks of brightness degradation and shortened lifespan. They are only recommended for temporary backup machines.

Q: What should I do if the machine shows a "lamp not recognized" message after replacement?

A: First confirm whether the lamp timer has been reset. The vast majority of such messages are caused by the timer not being cleared. If the error persists after resetting, contact Zorsika technical support; we provide reset methods and troubleshooting guidance for the corresponding models.

Q: My machine is not on the 7-model list above. Can I use the 03-000649-01P?

A: The list covers verified models, but it does not represent all of them. Christie products of the same generation often share lamp modules. Take a photo of the machine nameplate and the original lamp label and send it to Zorsika technical support to confirm compatibility.

Q: Is there an installation guide for the 03-000649-01P?

A: Yes. The lamp door location and removal/installation steps for these Christie models are basically the same. Contact Zorsika sales to obtain illustrated or video guides for the corresponding model.

Q: How long is the lamp warranty?

A: The Zorsika PRO Series projector lamp comes with a 180-day warranty. Normal use with non-human damage (such as lamp explosion or abnormal early light decay) is eligible for after-sales service; brightness degradation within the standard range is normal wear and is not covered by the warranty.

Before Ordering, Verify These Three Things

1. Verify the nameplate model: Open the projector's lamp door; the model on the lamp module label should exactly match 03-000649-01P. Some Christie models have suffix variations such as -V or +, but the lamp module is usually interchangeable. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp form: The same model comes in four forms: original packaged, original bare, replacement, and second-hand, with significant differences among them. Original bare means an original factory arc tube paired with an aftermarket frame, which typically offers the best overall value. When ordering, be sure to specify clearly on the order which form you want to avoid disputes after delivery.
3. Verify physical specifications: The reflector size of 80X80L and the arc gap must match the original lamp. If any item does not match, the lamp may not fit or may not light up.

After Replacing the Lamp, Pay Attention to These Points

• Clean dust promptly: Dust accumulation on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in normal office environments, every 3-6 months.
• Use eco mode: Use eco mode whenever brightness is sufficient to reduce the lamp's thermal load.
• Avoid frequent switching: Thermal cycling is one of the main sources of lamp wear. If not using the projector for a short time, use the shutter function rather than repeatedly cutting power.
• Shut down properly: After shutting down, wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool suddenly, which is a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp timer in the menu, otherwise the machine will continue to alert based on the old timer.

Related Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Database

Purchase Inquiry

For solution consultation, bulk purchasing plans, or the complete compatible model list for the Christie 03-000649-01P, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article all come from the Zorsika product database. Data is continuously updated; please confirm with an actual inquiry.