Christie 03-000808-25P Projector Lamp for CX67-100U RPMX-100U CX50-100U CX60-100U OEM Replacement

If your Christie projector in the meeting room or classroom suddenly dims, don't rush to call for repairs. First check whether the lamp is due for replacement: 03-000808-25P covers 4 Christie models. Read on for specifications and replacement tips.

Where It Works: List of 4 Compatible Christie Models

The following are verified compatible Christie projector models for 03-000808-25P, separated by commas:

CX67-100U, RPMX-100U, CX50-100U, CX60-100U

Note: Projectors of the same generation often share the same lamp module. For models not listed, contact Zorsika technical support for confirmation.

Lamp Module Specifications

The above parameters come from the Zorsika product database. For the complete technical specification sheet, contact sales to request it.

You Might Want to Ask

Q: What should I do if the projector says the lamp is not recognized after replacement?

A: First confirm whether the lamp timer has been reset. The vast majority of such alerts are caused by the timer not being cleared. If the error persists after resetting, contact Zorsika technical support — we provide the reset procedure and troubleshooting guidance for the corresponding model.

Q: How do I choose between original packaged, original bare, and compatible alternatives?

A: If you want stable brightness and long-term reliability, the Zorsika PRO series lamp is the first choice — each parameter is matched to OEM specs, every unit is powered-on tested before shipping, performance is benchmarked against OEM, and it comes with a 180-day warranty. For routine business and education use and meeting rooms, the PRO series is the worry-free choice overall. Other alternative lamps cost less, but arc tube sourcing and quality control vary widely, with higher risk of brightness degradation and shortened lifespan — they are only recommended for temporary backup units.

Q: Why choose Zorsika PRO instead of OEM?

A: The core philosophy of the Zorsika PRO series lamp is "OEM parameters, independent quality control": power, arc gap, and reflector size are benchmarked item by item against OEM, but with an extra powered-on test for every unit before shipping, plus a 180-day warranty. Compared to OEM, it's more worry-free overall; compared to other alternatives, quality control is more consistent.

Q: Is there an installation tutorial for 03-000808-25P?

A: Yes. The lamp door location and removal/installation steps are basically the same across these Christie models. Contact Zorsika sales to obtain illustrated or video tutorials for the corresponding model.

Q: How long is the lamp warranty?

A: Zorsika PRO series projector lamps come with a 180-day warranty. Under normal use, non-human-caused damage (such as lamp explosion or abnormal early light decay) is covered by after-sales service; brightness degradation within the standard range is normal wear and is not covered by warranty.

What the Zorsika PRO Series Offers You

The Zorsika PRO series provides an OEM-spec replacement lamp module for 03-000808-25P, with key parameters benchmarked item by item against OEM, supporting project supply and bulk procurement with more controllable lead times.

• Specification Benchmarking: Power, arc gap, and reflector size matched item by item to OEM parameters
• Unit-by-Unit Testing: Every unit powered-on tested before shipping, ensuring brightness and stability
• Warranty Commitment: 180-day lamp warranty; normal use with non-human-caused damage covered by after-sales service
• Stable Supply: Supports bulk procurement and project supply

In one sentence: if you want OEM quality with a more worry-free overall experience, the Zorsika PRO series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is significantly affected by projector condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. Before bulk procurement, we recommend obtaining 1-2 samples for powered-on testing.

Routine Maintenance to Make Your Lamp Last Longer

• Clean Dust Promptly: Dust buildup on air intakes and air filters directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in typical office environments, every 3-6 months.
• Use Eco Mode: This lamp supports dual power of 100W / 120W. Switching to eco mode for routine presentations can significantly reduce the lamp's thermal load.
• Avoid Frequent On/Off Cycling: Thermal cycling is one of the main causes of lamp wear. If not using the projector for a short time, use the shutter function instead of repeatedly cutting power.
• Shut Down Properly: After powering off, you must wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, a common cause of lamp explosion.
• Reset After Replacement: After installing a new lamp, be sure to reset the lamp timer in the menu, otherwise the projector will continue to alert based on the old timer.

Related Query Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Database

Purchase Inquiry

For solution consultation, bulk plans, or the complete compatible model list for Christie 03-000808-25P, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article all come from the Zorsika product database. Data is continuously updated; please confirm with an actual quotation.