Christie 03-000882-01P Projector Lamp for VIVID LX40 VIVID LX50 LX40 LX50 OEM Replacement

Christie 03-000882-01P is a widely used lamp module for Christie projectors, covering multiple scenarios such as business and education, and conferences. This article compiles the specifications of this lamp, a list of 4 compatible projector models, and the points most prone to error when verifying a purchase.

Specifications of This Lamp

The above parameters come from the Zorsika product database. For the complete technical specification sheet, please contact sales to request it.

Christie 03-000882-01P Model Compatibility List (4 Models Total)

The following are the verified compatible models of 03-000882-01P among Christie projectors, with models separated by commas:

VIVID LX40, VIVID LX50, LX40, LX50

Note: Projectors of the same generation often share the same lamp module. For models not on the list, please contact Zorsika technical support for confirmation.

Purchase Pitfalls: Three Key Verification Items

1. Verify the nameplate model: Open the projector's lamp door, and the model on the lamp module label should match 03-000882-01P exactly. Some Christie models have suffix differences such as -V or +, but the lamp module is usually interchangeable. If unsure, taking a photo of the nameplate and sending it to Zorsika technical support for confirmation is the safer approach.
2. Confirm the lamp form: The same model comes in four forms: original packaged, original bare, replacement, and used, and the four forms differ considerably. Original bare means an original arc tube paired with an aftermarket frame, and it usually offers the best overall value for money. When purchasing, be sure to specify clearly on the order which form you want to avoid disputes after delivery.
3. Verify the physical specifications: The reflector size 80X80L and the arc gap must match the original lamp. If any one of these does not match, the lamp may not fit or may fail to light up.

Why Choose the Zorsika PRO Series

03-000882-01P is a relatively high-volume model. The Zorsika PRO Series applies consistency control to the arc tube according to original factory parameters and adds an extra factory lighting test, providing greater assurance of brightness and stability.

• Specification matching: Power, arc gap, and reflector size are matched item by item against original factory parameters
• Individual testing: Each unit is lit and tested before leaving the factory, ensuring brightness and stability
• Warranty commitment: 180-day warranty for the lamp; after-sales service is available for damage under normal use that is not caused by human factors
• Stable supply: Supports bulk purchasing and project supply

In one sentence: if you want original factory quality with greater overall peace of mind, the Zorsika PRO Series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is significantly affected by the machine's condition, the usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. Before bulk purchasing, it is recommended to obtain 1-2 samples for lighting tests.

Routine Maintenance to Make the Lamp Last Longer

• Clean dust promptly: Dust accumulation on the air inlet and air filter directly raises the lamp's operating temperature. In dusty environments, it is recommended to clean once every 1-2 months; in ordinary office environments, once every 3-6 months.
• Make good use of eco mode: In situations where brightness is sufficient, prioritize eco mode to reduce the lamp's heat load.
• Avoid frequent switching: Hot-cold cycling is one of the main sources of lamp wear. If the projector will not be used for a short time, it is recommended to use the blanking function rather than repeatedly cutting power.
• Shut down correctly: After shutting down, you must wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, which is a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp hours in the menu; otherwise, the machine will continue to alert based on the old timer.

Frequently Asked Questions

Q: My machine is not on the list of 4 models above. Can it use 03-000882-01P?

A: The list contains verified models, but it does not represent all of them. Christie products of the same generation often share lamp modules. Send photos of the body nameplate and the original lamp label to Zorsika technical support, and we can help confirm whether it is compatible.

Q: How do I choose between original packaged, original bare, and replacement?

A: If you pursue stable brightness and long-term reliability, the first choice is the Zorsika PRO Series lamp — matched item by item against original factory parameters, individually lit and tested before leaving the factory, with performance benchmarked to the original and greater overall peace of mind, plus a 180-day warranty. For routine business, education, and conference room use, the PRO Series is also the more worry-free overall choice. Although other replacement lamps cost less, the sources of their arc tubes and quality control vary greatly, and the risk of brightness decay and shortened lifespan is higher, so they are only recommended for temporary backup machines.

Q: Why choose Zorsika PRO instead of the original factory lamp?

A: The core logic of the Zorsika PRO Series lamp is "original factory parameters, independent quality control": power, arc gap, and reflector size are benchmarked item by item against the original, but an extra individual lighting test is added before leaving the factory, with a 180-day warranty. Compared with the original factory lamp, it offers greater overall peace of mind; compared with other replacement options, its quality control is more stable.

Q: What should I do if the machine indicates the lamp is not recognized after replacement?

A: First confirm whether the lamp hours have been reset. The vast majority of such prompts are caused by the timer not being reset. If an error still appears after resetting, contact Zorsika technical support; we provide reset methods and troubleshooting guidance for the corresponding models.

Q: Is there an installation tutorial for 03-000882-01P?

A: Yes. The lamp door location and removal/installation steps for these Christie models are basically the same. Contact Zorsika sales to obtain illustrated or video tutorials for the corresponding models.

Q: How long is the lamp warranty period?

A: The Zorsika PRO Series projector lamp comes with a 180-day warranty. After-sales service is available for damage under normal use that is not caused by human factors (such as lamp explosion or abnormal early brightness decay); brightness decay within the standard range is normal wear from use and is not covered by the warranty.

Related Inquiry Entries

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Purchase Consultation

For solution consultation, bulk proposals, or the complete compatible model list for Christie 03-000882-01P, please contact us through the following:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specification parameters, and compatible model data in this article all come from the Zorsika product database. The data is continuously updated, and actual inquiry confirmation shall prevail.