Digital Projection 107-750 Projector Lamp for iVision 30sx+ XB

When choosing a lamp for a Digital Projection projector, match the model first before anything else. The specs of the 107-750 and a quick-reference list of 18 compatible projector models are below.

Specifications at a Glance

The parameters above come from the Zorsika product database. Contact our sales team if you need the full technical datasheet.

Digital Projection 107-750 Model Compatibility List (18 Models Total)

The following are verified compatible models for the 107-750 among Digital Projection projectors, with model names separated by commas:

iVision 30sx+ XB, iVision 30sx+ XL, iVision 30sx+ XC, iVision 30sx+ W-XB, iVision 30sx+ W-XC, iVision 30sx+ W-XL, iVision 30-1080p XB, iVision 30-1080p-XL, iVision 30-1080p-XC, iVision 30-1080p-W-XB, iVision 30-1080p-W-XC, iVision 30-WUXGA-XB, iVision 30-1080p-W-XL, iVision 30-WUXGA-XL, iVision 30-WUXGA-XC, iVision 30-WUXGA-W-XB, iVision 30-WUXGA-W-XL, iVision 30-WUXGA-W-XC

Note: Projectors of the same generation often share the same lamp module. For models not on this list, contact Zorsika technical support for confirmation.

Same Specs — Why Choose Zorsika PRO

The Zorsika PRO series offers an OEM-spec replacement lamp module for the 107-750, with key parameters matched item by item to the original. We support project supply and bulk purchasing with more controllable lead times.

• Spec Matching: Power, arc gap, and reflector size matched item by item to original parameters
• Individual Testing: Each unit is powered-on tested before leaving the factory, ensuring brightness and stability
• Warranty Commitment: 180-day lamp warranty; normal use with non-human damage qualifies for after-sales service
• Stable Supply: Supports bulk purchasing and project supply

In a nutshell: if you want OEM quality with greater peace of mind, the Zorsika PRO series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is significantly affected by machine condition, operating environment, and cooling conditions. Zorsika does not make uniform numerical promises. We recommend ordering 1-2 samples for power-on testing before bulk purchasing.

Frequently Asked Questions

Q: Why choose Zorsika PRO instead of OEM?

A: The core philosophy of the Zorsika PRO series lamp is "OEM parameters, independent quality control": power, arc gap, and reflector size are matched item by item to the original, but with an extra individual power-on test before leaving the factory, plus a 180-day warranty. Compared to OEM, it offers greater peace of mind; compared to other replacement options, it offers more consistent quality control.

Q: How do I choose between original packaged, original bare, and generic replacement?

A: If you want stable brightness and long-term reliability, the Zorsika PRO series lamp is the first choice — matched item by item to original parameters, individually power-on tested before shipment, performance on par with OEM with greater peace of mind, and backed by a 180-day warranty. For routine business, education, and conference room use, the PRO series is also the more worry-free choice overall. Other replacement lamps may cost less, but arc tube sources and quality control vary widely, with higher risks of brightness degradation and shortened lifespan. They are only recommended for temporary backup machines.

Q: What should I do if the projector says the lamp is not recognized after replacement?

A: First check whether the lamp timer has been reset. The vast majority of such alerts are caused by an unreset timer. If the error persists after resetting, contact Zorsika technical support — we provide reset methods and troubleshooting guidance for the corresponding model.

Q: My machine isn't on the list of 18 models above — can I use the 107-750?

A: The list covers verified models, but it doesn't represent all of them. Digital Projection products of the same generation often share lamp modules. Take a photo of the machine nameplate and the original lamp label and send it to Zorsika technical support to confirm compatibility.

Q: Is there an installation guide for the 107-750?

A: Yes. The lamp door location and installation/removal steps are basically the same across these Digital Projection models. Contact Zorsika sales for illustrated or video guides for the corresponding model.

Q: How long is the lamp warranty?

A: The Zorsika PRO series projector lamp comes with a 180-day warranty. Normal use with non-human damage (such as lamp explosion or abnormal early brightness degradation) qualifies for after-sales service; brightness degradation within standard range is normal wear and is not covered by warranty.

Purchasing Pitfalls: Three Key Checks

1. Check the nameplate model: Open the projector's lamp door — the model on the lamp module label should exactly match 107-750. Some Digital Projection models have suffix variations like -V or +, but the lamp module is usually compatible. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp form: The same model comes in four forms — original packaged, original bare, generic replacement, and used — and the differences are significant. Original bare means an OEM arc tube paired with an aftermarket frame, typically offering the best overall value. Always specify clearly on the order which form you want to avoid disputes after delivery.
3. Check physical specs: Reflector size 56X56D, socket E21.8, and arc gap must all match the original lamp. If any one of these doesn't match, the lamp may not fit or may fail to light.

After Replacing the Lamp: Points to Note

• Clean dust promptly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in normal office environments, every 3-6 months.
• Use eco mode: This lamp supports dual power of 300W / 250W. Switching to eco mode for everyday presentation scenarios significantly reduces the lamp's thermal load.
• Avoid frequent on/off cycling: Thermal cycling is a major source of lamp wear. If not in use for a short period, use the shutter function instead of repeatedly cutting power.
• Shut down properly: After shutting down, wait for the fan to stop before cutting power. Cutting power while hot causes sudden cooling of the lamp, a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp timer in the menu; otherwise the projector will continue to alert based on the old timer.

Related Resources

• Zorsika Technical Support Center
• Projector Brand & Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Database

Purchasing Inquiries

For solution consultation, bulk purchasing plans, or the complete compatible model list for the Digital Projection 107-750, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article come from the Zorsika product database. Data is continuously updated; please confirm with an actual inquiry.