Digital Projection 109-682 Projector Lamp for M-Vision Cine 260

When choosing a lamp for a Digital Projection projector, match the model first before anything else. The specs of the 109-682 and a quick reference to its 3 compatible projector models are as follows.

Specifications of This Lamp

The above parameters come from the Zorsika product database. For the complete technical specification sheet, please contact sales.

Where It Works: List of 3 Compatible Digital Projection Models

The following are the verified compatible models of the 109-682 among Digital Projection projectors, with model names separated by commas:

M-Vision Cine 260, M-Vision Cine 260-HB, M-Vision Cine 260-HC

Note: Projectors of the same generation often share the same lamp module. For models not on this list, please contact Zorsika technical support for confirmation.

Same Specifications — Why We Recommend Zorsika PRO

The 109-682 is a relatively high-volume model. The Zorsika PRO series applies consistency control to the arc tube according to original factory parameters and adds an extra factory lighting test, providing greater assurance of brightness and stability.

• Specification Matching: Power, arc gap, and reflector size are matched item by item against original factory parameters
• Individual Testing: Each unit is lit and tested before leaving the factory, ensuring brightness and stability
• Warranty Commitment: 180-day warranty on the lamp; normal use with non-human damage is covered by after-sales service
• Stable Supply: Supports bulk purchasing and project supply

In one sentence: If you want original factory quality with greater overall peace of mind, the Zorsika PRO series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is significantly affected by machine condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. Before bulk purchasing, we recommend getting 1-2 samples for lighting tests.

You May Want to Ask

Q: Why choose Zorsika PRO instead of the original factory?

A: The core logic of the Zorsika PRO series lamp is "original factory parameters, independent quality control": power, arc gap, and reflector size are benchmarked item by item against the original factory, but an extra individual lighting test is added before leaving the factory, with a 180-day warranty. Compared with the original factory, it offers greater overall peace of mind; compared with other alternatives, quality control is more stable.

Q: How do I choose between original packaged, original bare, and replacement?

A: If you pursue stable brightness and long-term reliability, the Zorsika PRO series lamp is the first choice — matched item by item against original factory parameters, individually lit and tested before leaving the factory, with performance benchmarked against the original factory, greater overall peace of mind, and a 180-day warranty; for regular commercial education and meeting room use, the PRO series also offers greater overall peace of mind. Although other replacement lamps cost less, the arc tube sources and quality control vary greatly, with higher risks of brightness decay and shortened lifespan, so they are only recommended for temporary backup machines.

Q: What should I do if the machine says the lamp is not recognized after replacement?

A: First confirm whether the lamp timer has been reset. The vast majority of such alerts are caused by the timer not being cleared. If the error persists after resetting, contact Zorsika technical support; we provide the reset method and troubleshooting guidance for the corresponding model.

Q: My machine is not on the list of 3 models above. Can I use the 109-682?

A: The list covers verified models, not all of them. Digital Projection products of the same generation often share the same lamp module. Take photos of the machine nameplate and the original lamp label and send them to Zorsika technical support, and we can help confirm compatibility.

Q: Is there an installation tutorial for the 109-682?

A: Yes. The lamp door location and removal/installation steps for these Digital Projection models are basically the same. Contact Zorsika sales to obtain the illustrated or video tutorial for the corresponding model.

Q: How long is the lamp warranty?

A: The Zorsika PRO series projector lamp comes with a 180-day warranty. Normal use with non-human damage (such as lamp explosion or abnormal early light decay) is covered by after-sales service; brightness decay within the standard range is normal usage wear and is not covered by the warranty.

Purchasing Pitfalls to Avoid: Three Key Checks

1. Check the nameplate model: Open the projector's lamp door; the model on the lamp module label should match 109-682 exactly. Some Digital Projection models have suffix differences such as -V or +, but the lamp module is usually compatible. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp form: The same model comes in four forms: original packaged, original bare, replacement, and second-hand, which differ considerably. Original bare means an original factory arc tube paired with an aftermarket frame, usually offering the best overall value; when purchasing, be sure to specify clearly on the order which one you want to avoid disputes after delivery.
3. Check the physical specifications: Reflector size 51X51D, socket E20.6, and arc gap must match the original lamp. If any one of these does not match, it may not fit or may fail to light up.

After Replacing the Lamp, Pay Attention to These Points

• Clean dust promptly: Dust accumulation at the air inlet and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in ordinary office environments, every 3-6 months.
• Use eco mode well: Where brightness is sufficient, prioritize eco mode to reduce the lamp's thermal load.
• Avoid frequent switching: Thermal cycling is one of the main sources of lamp wear. If not in use for a short time, use the shutter function instead of repeatedly cutting power.
• Shut down properly: After shutting down, you must wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool suddenly, a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp timer in the menu; otherwise the machine will continue to alert based on the old timer.

Related Query Entrances

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Purchasing Consultation

For solution consultation, bulk plans, or the complete compatible model list for the Digital Projection 109-682, please contact us via the following:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specification parameters, and compatible model data in this article all come from the Zorsika product database. The data is continuously updated; please refer to actual inquiry confirmation.