Digital Projection 113-628 Projector Lamp Compatible Models: Mercury 930 TITAN Quad 2000 TITAN 930

No need to read the manual: the core specs of the Digital Projection 113-628 projector lamp, its 3 compatible projector models, and the three things you should confirm before buying are all in this article.

Specifications of This Lamp

The above specifications come from the Zorsika product database. Contact our sales team for the complete technical datasheet.

Digital Projection 113-628 Model Compatibility List (3 Models Total)

The following are verified compatible models of the 113-628 among Digital Projection projectors, separated by commas:

Mercury 930, TITAN Quad 2000, TITAN 930

Note: Projectors of the same generation often share the same lamp module. For models not on this list, contact Zorsika technical support for confirmation.

What the Zorsika PRO Series Offers You

The Zorsika PRO Series provides an original-spec replacement lamp module for the 113-628, with key parameters benchmarked item by item against the original, and supports project supply and bulk procurement with more controllable lead times.

• Spec Benchmarking: Power, arc gap, and reflector size are matched item by item to the original parameters
• Individual Testing: Each unit is lit and tested before leaving the factory, ensuring brightness and stability
• Warranty Commitment: 180-day warranty on the lamp; normal use with non-human damage is covered by after-sales service
• Stable Supply: Supports bulk procurement and project supply

In a nutshell: if you want original quality with greater peace of mind overall, the Zorsika PRO Series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is significantly affected by machine condition, usage environment, and cooling conditions. Zorsika makes no uniform numerical promises. We recommend getting 1-2 samples for lighting tests before bulk procurement.

You Might Want to Ask

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO Series lamp is "original parameters, independent quality control": power, arc gap, and reflector size are benchmarked item by item against the original, but with an extra individual lighting test before leaving the factory and a 180-day warranty. Compared to the original, it offers greater peace of mind overall; compared to other replacement options, it offers more consistent quality control.

Q: How do I choose between original packaged, original bare, and generic replacement?

A: If you want stable brightness and long-term reliability, the Zorsika PRO Series lamp is the first choice—matched item by item to original parameters, individually lit and tested before leaving the factory, with performance benchmarked against the original, greater peace of mind overall, and a 180-day warranty. For routine business, education, and conference room use, the PRO Series is also the more worry-free choice overall. Other replacement lamps may cost less, but the arc tube sources and quality control vary widely, with higher risks of brightness degradation and shortened lifespan—recommended only for temporary backup machines.

Q: What should I do if the machine says the lamp is not recognized after replacement?

A: First, confirm whether the lamp timer has been reset. The vast majority of such alerts are caused by the timer not being cleared. If the error persists after resetting, contact Zorsika technical support—we provide the reset method and troubleshooting guidance for the corresponding model.

Q: My machine is not on the list of 3 models above. Can I use the 113-628?

A: The list covers verified models, not all of them. Digital Projection products of the same generation often share lamp modules. Take photos of the machine's nameplate and the original lamp label and send them to Zorsika technical support to confirm compatibility.

Q: Is there an installation guide for the 113-628?

A: Yes. The lamp door location and removal/installation steps for these Digital Projection models are basically the same. Contact Zorsika sales for illustrated or video guides for the corresponding model.

Q: How long is the lamp warranty?

A: The Zorsika PRO Series projector lamp comes with a 180-day warranty. Normal use with non-human damage (such as lamp explosion or abnormal early light decay) is covered by after-sales service; brightness degradation within the standard range is normal wear and is not covered by the warranty.

Before Ordering, Check These Three Things

1. Check the nameplate model: Open the projector's lamp door; the model on the lamp module label should exactly match 113-628. Some Digital Projection models have suffix variations such as -V or +, but the lamp module is usually compatible. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp form: The same model comes in four forms—original packaged, original bare, generic replacement, and used—and the differences are significant. Original bare means an original arc tube paired with an aftermarket frame, usually offering the best overall value. When ordering, be sure to specify clearly which form you want to avoid disputes after delivery.
3. Check the physical specifications: The arc gap and other items must match the original lamp. Any mismatch may prevent installation or prevent the lamp from lighting up.

After Replacing the Lamp, Pay Attention to These Points

• Clean dust promptly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in ordinary office environments, every 3-6 months.
• Use eco mode: Use eco mode whenever brightness is sufficient to reduce the lamp's thermal load.
• Avoid frequent switching: Thermal cycling is one of the main sources of lamp wear. If not in use for a short time, use the blanking function instead of repeatedly cutting power.
• Shut down properly: After shutting down, wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp timer in the menu; otherwise the machine will continue to alert based on the old timer.

Related Query Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Database

Procurement Inquiries

For solution consultation, bulk plans, or the complete compatible model list for the Digital Projection 113-628, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article all come from the Zorsika product database. Data is continuously updated; please refer to actual inquiry confirmation.