Digital Projection 114-318 Projector Lamp for M-VISION 930 SERIES OEM Replacement

When choosing a lamp for a Digital Projection projector, confirm the model first before anything else. Here are the specs of the 114-318 and a quick reference for its 1 compatible projector model.

Specifications at a Glance

The above parameters come from the Zorsika product database. For the complete technical specification sheet, please contact sales.

Digital Projection 114-318 Model Compatibility List (1 model in total)

The following are verified compatible models of the 114-318 among Digital Projection projectors, with models separated by commas:

M-VISION 930 SERIES

Note: Projectors of the same generation often share the same lamp module. For models not on the list, please contact Zorsika technical support for confirmation.

What the Zorsika PRO Series Offers You

For a high-volume standard lamp module like the 114-318, the Zorsika PRO Series provides an alternative with the same specifications as the original, matching the original item by item in power, arc gap, and reflector size, with each unit lit and tested before leaving the factory. It is ready to use upon installation with no structural modification required.

• Specification Matching: Power, arc gap, and reflector size matched item by item to the original parameters
• Individual Testing: Each unit lit and tested before leaving the factory, ensuring brightness and stability
• Warranty Commitment: 180-day warranty on the lamp; normal use with non-human damage is covered by after-sales service
• Stable Supply: Supports bulk purchasing and project supply

In one sentence: if you want original-quality performance with greater overall peace of mind, the Zorsika PRO Series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is significantly affected by the machine's condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. Before bulk purchasing, we recommend getting 1-2 sample units for lighting tests.

You May Want to Ask

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO Series lamp is "original parameters, independent quality control": power, arc gap, and reflector size are matched item by item to the original, but with an extra individual lighting test before leaving the factory and a 180-day warranty. Compared with the original, it offers greater overall peace of mind; compared with other alternatives, its quality control is more stable.

Q: How do I choose between original packaged, original bare, replacement, and used?

A: If you pursue stable brightness and long-term reliability, the Zorsika PRO Series lamp is the first choice—matched item by item to the original parameters, individually lit and tested before leaving the factory, with performance comparable to the original, greater overall peace of mind, and a 180-day warranty; for routine business and education and conference room use, the PRO Series is also a more worry-free overall choice. Although other replacement lamps cost less, the sources of their arc tubes and their quality control vary greatly, with higher risks of brightness decay and shortened lifespan, so they are only recommended for temporary backup machines.

Q: What should I do if the machine says the lamp is not recognized after replacement?

A: First confirm whether the lamp hour counter has been reset. The vast majority of such messages are caused by the timer not being cleared. If the error persists after resetting, contact Zorsika technical support; we provide the reset method and troubleshooting guidance for the corresponding model.

Q: My machine is not on the list of 1 model above. Can it use the 114-318?

A: The list covers verified models, but it does not represent all of them. Digital Projection products of the same generation often share lamp modules. Take photos of the machine's nameplate and the original lamp label and send them to Zorsika technical support, and we can help confirm compatibility.

Q: Is there an installation tutorial for the 114-318?

A: Yes. The lamp door location and removal/installation steps for these Digital Projection models are basically the same. Contact Zorsika sales to obtain the illustrated or video tutorial for the corresponding model.

Q: How long is the lamp warranty?

A: The Zorsika PRO Series projector lamp comes with a 180-day warranty. Normal use with non-human damage (such as lamp explosion or abnormal early light decay) is covered by after-sales service; brightness decay within the standard range is normal wear and is not covered by the warranty.

Before Ordering, Check These Three Things

1. Check the nameplate model: Open the projector's lamp door; the model on the lamp module label should exactly match 114-318. Some Digital Projection models have suffix differences such as -V or +, but the lamp module is usually shared. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp form: The same model comes in four forms: original packaged, original bare, replacement, and used, and the four differ considerably. Original bare is an original arc tube paired with a third-party lamp frame, usually offering the best overall value for money; when purchasing, be sure to specify clearly on the order which one you want to avoid disputes after delivery.
3. Check the physical specifications: The arc gap and other items must match the original lamp; if any item does not match, it may not fit or may fail to light up.

After Replacing the Lamp, Pay Attention to These Points

• Clean dust promptly: Dust accumulation on the air inlet and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in ordinary office environments, every 3-6 months.
• Make good use of eco mode: Where brightness is sufficient, prioritize eco mode to reduce the lamp's heat load.
• Avoid frequent switching: Thermal cycling is one of the main sources of lamp wear. If not in use for a short time, use the shutter function rather than repeatedly cutting power.
• Shut down correctly: After shutting down, wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp hours in the menu, otherwise the machine will keep alerting based on the old timer.

Related Query Entries

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Purchasing Consultation

For solution consultation, bulk plans, or the complete compatible model list for the Digital Projection 114-318, please contact us via the following:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specification parameters, and compatible model data in this article all come from the Zorsika product database. The data is continuously updated; please refer to actual inquiry confirmation.