Projectiondesign 400-0003-00 Projector Lamp Compatible Models: Action! 1, Action! 1 MKII

When choosing a lamp for a Projectiondesign projector, match the model first before anything else. The specs of 400-0003-00 and a quick reference to its 16 compatible projector models are as follows.

Specifications at a Glance

The above parameters come from the Zorsika product database. For the complete technical specification sheet, please contact our sales team.

Compatible Projector Models: 16 Projectiondesign Projectors

The following are verified compatible projector models for 400-0003-00 among Projectiondesign projectors, with models separated by commas:

Action! 1, Action! 1 MKII, Action! 05, Action! 05 MKII, EVO, F1+ SXGA, F1 SXGA-6, F1 SXGA, F1 XGA, F1, F1+ XGA WIDE, F1+ XGA, evo+, cineo MK II, cineo MK III, Action! 1 MK III

Note: Projectors of the same generation often share the same lamp module. For models not on this list, please contact Zorsika technical support for confirmation.

Same Specs, Why Choose Zorsika PRO

For high-volume standard lamp modules like 400-0003-00, the Zorsika PRO series offers an alternative with the same specs as the original, matching power, arc gap, and reflector size item by item against the original, with each unit lit and tested before leaving the factory. It is ready to install without any structural modification.

• Spec Matching: Power, arc gap, and reflector size matched item by item to original parameters
• Individual Testing: Each unit lit and tested before shipment, ensuring brightness and stability
• Warranty Commitment: 180-day warranty on the lamp; normal use with non-human damage is covered by after-sales service
• Stable Supply: Supports bulk purchasing and project supply

In one sentence: if you want original quality with greater peace of mind overall, the Zorsika PRO series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is significantly affected by the projector's condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. We recommend ordering 1-2 sample units for lighting tests before bulk purchasing.

Frequently Asked Questions

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO series lamp is "original parameters, independent quality control": power, arc gap, and reflector size are matched item by item to the original, but with an additional individual lighting test before shipment and a 180-day warranty. Compared to the original, it offers greater peace of mind overall; compared to other alternatives, it offers more consistent quality control.

Q: How to choose between original packaged, original bare, and replacement?

A: If you pursue stable brightness and long-term reliability, the Zorsika PRO series lamp is the first choice — matched item by item to original parameters, individually lit and tested before shipment, performance on par with the original, greater peace of mind overall, and backed by a 180-day warranty. For routine business and education, conference room use, the PRO series is also the more worry-free choice overall. Although other replacement lamps cost less, the arc tube sources and quality control vary greatly, with higher risks of brightness degradation and shortened lifespan. They are only recommended for temporary backup projectors.

Q: What should I do if the projector shows "lamp not recognized" after replacement?

A: First confirm whether the lamp timer has been reset. The vast majority of such alerts are caused by the timer not being cleared. If the error persists after resetting, contact Zorsika technical support — we provide reset methods and troubleshooting guidance for the corresponding models.

Q: My projector is not on the 16-model list above. Can it use 400-0003-00?

A: The list covers verified models, not all models. Projectiondesign products of the same generation often share lamp modules. Take photos of the projector nameplate and the original lamp label and send them to Zorsika technical support to confirm compatibility.

Q: Is there an installation guide for 400-0003-00?

A: Yes. The lamp door location and installation/removal steps for these Projectiondesign models are basically the same. Contact Zorsika sales for illustrated or video guides for the corresponding model.

Q: How long is the lamp warranty?

A: The Zorsika PRO series projector lamp comes with a 180-day warranty. Normal use with non-human damage (such as lamp explosion or abnormal early light decay) is covered by after-sales service; brightness degradation within the standard range is normal wear and is not covered by the warranty.

Three Points to Verify Before Purchasing

1. Verify the nameplate model: Open the projector's lamp door; the model on the lamp module label should exactly match 400-0003-00. Some Projectiondesign models have suffix differences such as -V or +, but the lamp module is usually compatible. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp form: The same model comes in four forms: original packaged, original bare, replacement, and used, which differ considerably. Original bare means an original arc tube paired with a third-party lamp frame, typically offering the best overall value. When purchasing, be sure to specify clearly on the order which form you want to avoid disputes after delivery.
3. Verify physical specs: Reflector size 56X56D, base E21.8, and arc gap must match the original lamp. If any one of these does not match, the lamp may not fit or may not light up.

After Replacing the Lamp, Pay Attention to These Points

• Clean dust promptly: Dust accumulation on the air inlet and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in ordinary office environments, every 3-6 months.
• Use eco mode: This lamp supports dual power of 300W / 250W. Switching to eco mode for daily presentation scenarios can significantly reduce the lamp's thermal load.
• Avoid frequent switching: Thermal cycling is one of the main sources of lamp wear. If not in use for a short time, use the shutter function rather than repeatedly cutting power.
• Shut down properly: After shutting down, wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp timer in the menu, otherwise the projector will continue to alert based on the old timer.

Related Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Database

Purchase Inquiry

For solution consultation, bulk proposals, or the complete compatible model list for Projectiondesign 400-0003-00, please contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article all come from the Zorsika product database. Data is continuously updated; please refer to actual inquiry confirmation.