Projectiondesign 400-0140-00 Projector Lamp for cieno1 OEM Replacement

When choosing a lamp for a Projectiondesign projector, match the model first before anything else. The specs of 400-0140-00 and a quick reference for 1 compatible projector model are below.

Lamp Module Specifications

The parameters above come from the Zorsika product database. Contact sales if you need the complete technical datasheet.

Projectiondesign 400-0140-00 Model Compatibility List (1 in total)

The following Projectiondesign projector models have been verified as compatible with 400-0140-00. Models are separated by commas:

cieno1

Note: Projectors of the same generation often share the same lamp module. For models not on this list, contact Zorsika technical support to confirm compatibility.

Same Specs, So Why Choose Zorsika PRO

The Zorsika PRO series offers an OEM-equivalent replacement lamp module for 400-0140-00, with key parameters benchmarked item by item against the original. It supports project supply and bulk purchasing, with more controllable lead times.

• Spec Benchmarking: Power, arc gap, and reflector size matched item by item to OEM parameters
• Individually Tested: Each unit is lit and tested before leaving the factory, ensuring brightness and stability
• Warranty Commitment: 180-day lamp warranty; normal use with non-human damage is covered by after-sales service
• Stable Supply: Supports bulk purchasing and project supply

In short: if you want OEM quality with less hassle overall, the Zorsika PRO series projector lamp is made for exactly that.

Note: Performance such as brightness and lifespan is heavily affected by machine condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. Before bulk purchasing, we recommend getting 1-2 samples for a lighting test.

Frequently Asked Questions

Q: Why choose Zorsika PRO instead of the OEM?

A: The core logic of the Zorsika PRO series lamp is "OEM parameters, independent quality control": power, arc gap, and reflector size are benchmarked item by item against the original, but with an extra individual lighting test before leaving the factory and a 180-day warranty. Compared with the OEM, it's less hassle overall; compared with other replacement options, quality control is more consistent.

Q: How do I choose between original packaged, original bare, and generic replacements?

A: If you want stable brightness and long-term reliability, the Zorsika PRO series lamp is the first choice—matched item by item to OEM parameters, individually lit and tested before leaving the factory, with performance benchmarked to the original, less hassle overall, and a 180-day warranty. For routine business and education use and meeting rooms, the PRO series is also less hassle overall. Other replacement lamps cost less, but arc tube sourcing and quality control vary widely, with higher risk of brightness decay and shortened lifespan. They are only recommended for temporary backup machines.

Q: What should I do if the machine says the lamp is not recognized after replacement?

A: First check whether the lamp timer was reset. The vast majority of such messages are caused by the timer not being cleared. If the error persists after resetting, contact Zorsika technical support—we provide the reset method and troubleshooting guidance for the corresponding model.

Q: My machine isn't on the list of 1 above—can it use 400-0140-00?

A: The list covers verified models, not all of them. Projectiondesign products of the same generation often share lamp modules. Take a photo of the machine's nameplate and the original lamp label and send it to Zorsika technical support to confirm compatibility.

Q: Is there an installation guide for 400-0140-00?

A: Yes. The lamp door location and removal/installation steps are basically the same across these Projectiondesign models. Contact Zorsika sales for illustrated or video guides for the corresponding model.

Q: How long is the lamp warranty?

A: The Zorsika PRO series projector lamp comes with a 180-day warranty. Normal use with non-human damage (such as lamp explosion or abnormal early light decay) is covered by after-sales service; brightness decay within the standard range is normal wear and tear and is not covered by the warranty.

Before Ordering, Check These Three Things

1. Check the nameplate model: Open the projector's lamp door; the model on the lamp module label should match 400-0140-00 exactly. Some Projectiondesign models have suffix differences such as -V or +, but the lamp module is usually compatible. If unsure, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp form: The same model comes in four forms—original packaged, original bare, generic, and used—and the differences are significant. Original bare means an OEM arc tube with an aftermarket frame, usually offering the best overall value. When ordering, be sure to specify clearly which form you want to avoid disputes after delivery.
3. Check the physical specs: The arc gap and other items must match the original lamp. If any item doesn't match, it may not fit or may fail to light.

After Replacing the Lamp, Pay Attention to These Points

• Clean dust promptly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in a typical office environment, every 3-6 months.
• Use eco mode: Where brightness is sufficient, prefer eco mode to reduce the lamp's thermal load.
• Avoid frequent switching: Thermal cycling is a major source of lamp wear. If not in use for a short time, use the shutter function rather than repeatedly cutting power.
• Shut down properly: After shutting down, wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp timer in the menu; otherwise the machine will keep alerting based on the old timer.

Related Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Database

Purchasing Inquiry

For solution consultation, bulk plans, or the complete model compatibility list for Projectiondesign 400-0140-00, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specification parameters, and compatible model data in this article all come from the Zorsika product database. Data is continuously updated; please confirm with an actual quote.