Projectiondesign 400-0184-00 Projector Lamp for F1+ SX+E F1+ WIDE F1+ SX+ F1+ F1 SX+ F1+ SXGA+ OEM

When replacing a Projectiondesign projector lamp, the most time-consuming part is often not the installation itself, but confirming whether the model matches. The 400-0184-00 covers 6 Projectiondesign models. This article lays out the specifications, compatible projector models, and key verification points all at once.

Specifications at a Glance

The above specifications come from the Zorsika product database. For a complete technical datasheet, please contact sales.

Where It Works: List of 6 Compatible Projectiondesign Models

The following are verified compatible models for the 400-0184-00 among Projectiondesign projectors, separated by commas:

F1+ SX+E, F1+ WIDE, F1+ SX+, F1+, F1 SX+, F1+ SXGA+

Note: Projectors of the same generation often share the same lamp module. For models not listed, contact Zorsika technical support for confirmation.

Before Ordering, Check These Three Things

1. Check the nameplate model: Open the projector's lamp door and verify that the model on the lamp module label exactly matches 400-0184-00. Some Projectiondesign models have suffix variations such as -V or +, but the lamp module is usually interchangeable. If unsure, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp form: The same model comes in four forms: original packaged, original bare, compatible, and used — and the differences are significant. Original bare means an OEM arc tube paired with an aftermarket frame, typically offering the best overall value. When ordering, be sure to specify which form you need to avoid disputes upon delivery.
3. Verify physical specifications: The reflector size (56X56D), socket spec (E21.8), and arc gap must all match the original lamp. Any mismatch may result in the lamp not fitting or not lighting up.

What the Zorsika PRO Series Offers You

The Zorsika PRO Series provides an OEM-spec replacement lamp module for the 400-0184-00, with key parameters matched item by item to the original. It supports project supply and bulk procurement with more controllable lead times.

• Spec matching: Power, arc gap, and reflector size matched item by item to OEM parameters
• Individual testing: Each unit is lit and tested before leaving the factory, ensuring brightness and stability
• Warranty commitment: 180-day warranty on the lamp; normal use with non-human damage qualifies for after-sales service
• Stable supply: Supports bulk procurement and project supply

In short: if you want OEM quality with greater peace of mind, the Zorsika PRO Series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is significantly affected by the projector's condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical commitments. For bulk purchases, we recommend ordering 1-2 samples for lighting tests first.

Routine Maintenance to Make Your Lamp Last Longer

• Clean dust promptly: Dust accumulation on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in typical office environments, every 3-6 months.
• Use eco mode: This lamp supports dual power of 300W / 250W. Switching to eco mode for everyday presentations can significantly reduce the lamp's thermal load.
• Avoid frequent on/off cycling: Thermal cycling is one of the main causes of lamp wear. If not using the projector for a short period, use the blank/shutter function instead of repeatedly cutting power.
• Shut down properly: After powering off, wait for the fan to stop before cutting power. Cutting power while the lamp is hot causes sudden cooling, which is a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp hours in the menu; otherwise, the projector will continue to alert based on the old timer.

FAQ

Q: My projector isn't in the list of 6 models above. Can I use the 400-0184-00?

A: The list covers verified models but does not represent all possibilities. Projectiondesign products of the same generation often share the same lamp module. Take a photo of the projector nameplate and the original lamp label and send them to Zorsika technical support to confirm compatibility.

Q: How do I choose between original packaged, original bare, and compatible?

A: If you want stable brightness and long-term reliability, the Zorsika PRO Series lamp is the top choice — matched item by item to OEM parameters, individually lit and tested before leaving the factory, with performance benchmarked against OEM, greater overall peace of mind, and a 180-day warranty. For routine business, education, and conference room use, the PRO Series is also the more worry-free choice overall. Other replacement lamps cost less but vary greatly in arc tube sourcing and quality control, with higher risks of brightness degradation and shortened lifespan. They are only recommended for temporary backup projectors.

Q: Why choose Zorsika PRO instead of OEM?

A: The core philosophy of the Zorsika PRO Series lamp is "OEM parameters, independent quality control": power, arc gap, and reflector size are matched item by item to OEM specs, but with an additional individual lighting test before leaving the factory and a 180-day warranty. Compared to OEM, it offers greater overall peace of mind; compared to other replacement options, it offers more consistent quality control.

Q: What should I do if the projector says the lamp is not recognized after replacement?

A: First, confirm whether you performed the lamp hour reset. The vast majority of such alerts are caused by the timer not being reset. If the error persists after resetting, contact Zorsika technical support — we provide reset methods and troubleshooting guidance for the corresponding model.

Q: Is there an installation tutorial for the 400-0184-00?

A: Yes. The lamp door location and installation steps for these Projectiondesign models are essentially the same. Contact Zorsika sales to obtain illustrated or video tutorials for the corresponding model.

Q: How long is the lamp warranty?

A: The Zorsika PRO Series projector lamp comes with a 180-day warranty. Normal use with non-human damage (such as lamp explosion or abnormal early brightness degradation) qualifies for after-sales service. Brightness degradation within the standard range is normal wear and is not covered by the warranty.

Related Links

• Zorsika Technical Support Center
• Projector Brand & Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Database

Purchase Inquiry

For solution consultation, bulk procurement plans, or a complete compatible model list for the Projectiondesign 400-0184-00, please contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article are all sourced from the Zorsika product database. Data is continuously updated; please confirm with an actual inquiry.