Projectiondesign 400-0300-00 Projector Lamp for Action! 3, cineo3, F3, Action! 3 1080p

If a Projectiondesign projector in your meeting room or classroom suddenly dims, don't rush to call for repairs. First check whether the lamp is due for replacement: 400-0300-00 covers 7 Projectiondesign models. Read on for specifications and replacement tips.

Projectiondesign 400-0300-00 Compatible Projector Models (7 in Total)

The following are verified compatible models for 400-0300-00 among Projectiondesign projectors, separated by commas:

Action! 3, cineo3, F3, Action! 3 1080p, F3 SX+, F3 SXGA +, F3 XGA

Note: Projectors of the same generation often share the same lamp module. For models not listed, contact Zorsika technical support for confirmation.

Lamp Module Specifications

The above parameters come from the Zorsika product database. For a complete technical specification sheet, contact sales to request one.

Frequently Asked Questions

Q: What should I do if the projector says the lamp is not recognized after replacement?

A: First check whether the lamp timer has been reset. The vast majority of such alerts are caused by the timer not being cleared. If the error persists after resetting, contact Zorsika technical support — we provide the reset procedure and troubleshooting guidance for the corresponding model.

Q: How do I choose between original packaged, original bare, and aftermarket?

A: If you want stable brightness and long-term reliability, the Zorsika PRO series lamp is the first choice — each parameter is matched to the original factory specs, every unit is powered on and tested before shipping, performance is on par with the original, and it comes with a 180-day warranty. For routine business and education use and meeting rooms, the PRO series is also the more worry-free option overall. Other replacement lamps cost less, but arc tube sourcing and quality control vary widely, with higher risk of brightness degradation and shortened lifespan — they are only recommended for temporary backup machines.

Q: Why choose Zorsika PRO instead of the original factory lamp?

A: The core principle of the Zorsika PRO series lamp is "original factory parameters, independent quality control": power, arc gap, and reflector size are benchmarked item by item against the original, but with an extra step of individual power-on testing before shipping and a 180-day warranty. Compared with the original, it is more worry-free overall; compared with other replacement options, quality control is more consistent.

Q: Is there an installation guide for 400-0300-00?

A: Yes. The lamp door location and removal/installation steps are basically the same across these Projectiondesign models. Contact Zorsika sales to obtain illustrated or video guides for the corresponding model.

Q: How long is the lamp warranty?

A: Zorsika PRO series projector lamps come with a 180-day warranty. Under normal use, non-human-caused damage (such as lamp explosion or abnormal early light decay) is covered by after-sales service; brightness degradation within the standard range is normal wear and is not covered by the warranty.

Why Choose the Zorsika PRO Series

For high-volume standard lamp modules like 400-0300-00, the Zorsika PRO series offers a replacement solution with the same specifications as the original: power, arc gap, and reflector size are benchmarked item by item against the original, every unit is powered on and tested before shipping, and it is ready to use upon installation without structural modification.

• Specification matching: power, arc gap, and reflector size matched item by item to original factory parameters
• Individual testing: every unit powered on and tested before shipping, ensuring brightness and stability
• Warranty commitment: 180-day lamp warranty; normal use with non-human-caused damage is covered by after-sales service
• Stable supply: supports bulk purchasing and project supply

In one sentence: if you want original factory quality with a more worry-free overall experience, the Zorsika PRO series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is significantly affected by machine condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. Before bulk purchasing, we recommend getting 1-2 samples for power-on testing.

Routine Maintenance to Make Your Lamp Last Longer

• Clean dust promptly: dust buildup on air intakes and air filters directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in ordinary office environments, every 3-6 months.
• Use eco mode: use eco mode whenever brightness is sufficient to reduce the lamp's thermal load.
• Avoid frequent on/off cycling: thermal cycling is one of the main causes of lamp wear. If not in use for a short time, use the shutter function instead of repeatedly cutting power.
• Shut down properly: after powering off, wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, a common cause of lamp explosion.
• Reset after replacement: after installing a new lamp, be sure to reset the lamp timer in the menu, otherwise the projector will continue to alert based on the old timer.

Related Resources

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Purchasing Inquiries

For solution consultation, bulk purchasing plans, or a complete compatible model list for Projectiondesign 400-0300-00, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article all come from the Zorsika product database. Data is continuously updated; please refer to actual quotation confirmation.