Projectiondesign 400-0400-00 Projector Lamp for F3 SX+ F3 XGA cineo3 1080p cineo3+ F12 and 22 More

If your Projectiondesign projector in the conference room or classroom suddenly dims, don't rush to call for repairs. First check whether the lamp is due for replacement: 400-0400-00 covers 22 Projectiondesign models. Read on for specifications and replacement tips.

Where It Works: List of 22 Compatible Projectiondesign Models

The following are verified compatible models for the 400-0400-00 in Projectiondesign projectors, with models separated by commas:

F3 SX+, F3 XGA, cineo3 1080p, cineo3+, F12, cineo3+ 1080p, cineo30 1080p, F30 1080, cineo30 720p, F3 SXGA+, cineo32, F3+, F3+ SX+, F3+ SXGA+, F3+ XGA, F30, F30 SX+, F32 1080p, F32 SX+, F3+ SXGA, F32 WUXGA, F30 WUXGA

Note: Projectors of the same generation often share the same lamp module. For models not listed, contact Zorsika technical support for confirmation.

Lamp Module Specifications

The above specifications come from the Zorsika product database. Contact sales for the complete technical datasheet.

You Might Be Wondering

Q: What should I do if the projector says the lamp is not recognized after replacement?

A: First check whether the lamp timer has been reset. The vast majority of such messages are caused by the timer not being cleared. If the error persists after resetting, contact Zorsika technical support — we provide the reset procedure and troubleshooting guidance for the corresponding model.

Q: How do I choose between original packaged, original bare, and aftermarket?

A: If you want stable brightness and long-term reliability, the Zorsika PRO series lamp is the first choice — it matches original specifications item by item, each unit is powered on and tested before leaving the factory, performance is on par with the original while being more worry-free overall, and it comes with a 180-day warranty. For routine business, education, and conference room use, the PRO series is also the more worry-free option overall. Other replacement lamps cost less, but arc tube sourcing and quality control vary widely, with higher risk of brightness degradation and shortened lifespan — they are only recommended for temporary backup units.

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO series lamp is "original specifications, independent quality control": power, arc gap, and reflector size all match the original item by item, but with an extra unit-by-unit power-on test before leaving the factory and a 180-day warranty. Compared with the original, it is more worry-free overall; compared with other replacement options, quality control is more consistent.

Q: Is there an installation guide for the 400-0400-00?

A: Yes. The lamp door location and installation/removal steps are basically the same across these Projectiondesign models. Contact Zorsika sales for illustrated or video guides for the corresponding model.

Q: How long is the lamp warranty?

A: Zorsika PRO series projector lamps come with a 180-day warranty. Normal use with non-human-caused damage (such as lamp explosion or abnormal early light decay) is covered by after-sales service; brightness degradation within the standard range is normal wear and is not covered by the warranty.

Same Specifications, Why We Recommend Zorsika PRO

For high-volume standard lamp modules like the 400-0400-00, the Zorsika PRO series offers a replacement solution with the same specifications as the original — power, arc gap, and reflector size all match the original item by item, each unit is powered on and tested before leaving the factory, and it is ready to use without structural modification.

• Specification matching: power, arc gap, and reflector size matched to original parameters item by item
• Unit-by-unit testing: each unit powered on and tested before leaving the factory, ensuring brightness and stability
• Warranty commitment: 180-day lamp warranty; normal use with non-human-caused damage is covered by after-sales service
• Stable supply: supports bulk purchasing and project supply

In one sentence: if you want original quality with a more worry-free overall experience, the Zorsika PRO series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is significantly affected by projector condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. Before bulk purchasing, we recommend getting 1-2 samples for power-on testing.

Routine Maintenance to Make Your Lamp Last Longer

• Clean dust promptly: dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in ordinary office environments, every 3-6 months.
• Use eco mode: this lamp supports dual power of 300W / 250W. Switching to eco mode for everyday presentations can significantly reduce the lamp's thermal load.
• Avoid frequent on/off cycling: thermal cycling is one of the main sources of lamp wear. If not in use for a short time, use the blank/mute function instead of repeatedly cutting power.
• Shut down properly: after shutting down, wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, a common cause of lamp explosion.
• Reset after replacement: after installing a new lamp, be sure to reset the lamp timer in the menu, otherwise the projector will keep alerting based on the old timer.

Related Lookup Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Purchasing Inquiries

For solution consultation, bulk proposals, or the complete compatible model list for the Projectiondesign 400-0400-00, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article all come from the Zorsika product database. Data is continuously updated; please refer to actual quotation confirmation.