Projectiondesign 400-0402-00 Projector Lamp for F22 WUXGA F22 1080p F22 SX+ F20 Medical etc 22

When replacing a Projectiondesign projector lamp, the most time-consuming part is often not the installation itself, but confirming whether the model matches. The 400-0402-00 covers 22 Projectiondesign models. This article lays out the specifications, compatible models, and key verification points all at once.

Specifications of This Lamp

The above parameters come from the Zorsika product database. For the complete technical specification sheet, please contact sales.

Where It Works: List of 22 Compatible Projectiondesign Models

The following are verified compatible Projectiondesign projector models for the 400-0402-00, with models separated by commas:

F22 WUXGA, F22 1080p, F22 SX+, F20 Medical, evo22sx+, evo20sx+, Action! M20, cineo 20, cineo 22, F22 720p, F21 WUXGA, F21 720p, F21 1080p, F21 SXGA+, Action! 2, F20 SX+ Medical, F20, F2 SX+, F2, evo2sx+, evo2, M20

Note: Projectors of the same generation often share the same lamp module. For models not on this list, contact Zorsika technical support for confirmation.

Purchasing Pitfalls: Three Key Verification Points

1. Verify the nameplate model: Open the projector's lamp door, and the model on the lamp module label should match 400-0402-00 exactly. Some Projectiondesign models have suffix variations such as -V or +, but the lamp module is usually interchangeable. If unsure, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp form: The same model comes in four forms: original packaged, original bare, compatible, and used — and the differences are significant. Original bare means an original arc tube paired with a third-party bracket, which typically offers the best overall value. When purchasing, be sure to specify clearly on the order which form you need to avoid disputes after delivery.
3. Verify physical specifications: The reflector size 45X45D, socket E19, and arc gap must match the original lamp. If any one of these doesn't match, the lamp may not fit or may fail to light.

Same Specifications — Why We Recommend Zorsika PRO

For high-volume standard lamp modules like the 400-0402-00, the Zorsika PRO series offers an alternative with the same specifications as the original, matching power, arc gap, and reflector size item by item against the original. Each unit is lit and tested before leaving the factory, ready to use upon installation with no structural modifications needed.

• Specification matching: Power, arc gap, and reflector size matched item by item to original parameters
• Individual testing: Each unit lit and tested before shipment, ensuring brightness and stability
• Warranty commitment: 180-day lamp warranty; normal use with non-human damage covered by after-sales service
• Stable supply: Bulk purchasing and project supply supported

In one sentence: if you want original quality with greater peace of mind, the Zorsika PRO series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is significantly affected by machine condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical commitments. We recommend ordering 1-2 samples for lighting tests before bulk purchasing.

Routine Maintenance to Make Your Lamp Last Longer

• Clean dust promptly: Dust accumulation on air intakes and air filters directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in normal office environments, every 3-6 months.
• Use eco mode: This lamp supports dual power of 220W / 170W. Switching to eco mode for everyday presentation scenarios can significantly reduce the lamp's thermal load.
• Avoid frequent on/off cycling: Thermal cycling is one of the main causes of lamp wear. If not using the projector for a short period, use the shutter function instead of repeatedly powering off.
• Shut down properly: After powering off, always wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp hours in the menu, otherwise the projector will continue to alert based on the old timer.

Frequently Asked Questions

Q: My projector isn't on the list of 22 models above. Can I use the 400-0402-00?

A: The list covers verified models, not all of them. Projectiondesign products of the same generation often share lamp modules. Take a photo of the projector nameplate and original lamp label and send it to Zorsika technical support, and we can help confirm compatibility.

Q: How do I choose between original packaged, original bare, and compatible?

A: If you want stable brightness and long-term reliability, the Zorsika PRO series lamp is the top choice — matched item by item to original parameters, each unit lit and tested before shipment, performance on par with the original with greater peace of mind, and backed by a 180-day warranty. For routine commercial/education and conference room use, the PRO series is also the more worry-free choice overall. Other alternative lamps may cost less, but arc tube sourcing and quality control vary widely, with higher risk of brightness degradation and shortened lifespan — only recommended for temporary backup machines.

Q: Why choose Zorsika PRO instead of the original?

A: The core philosophy of the Zorsika PRO series lamp is "original parameters, independent quality control": power, arc gap, and reflector size matched item by item to the original, but with an extra individual lighting test before shipment and a 180-day warranty. Compared to the original, it's more worry-free overall; compared to other alternatives, quality control is more consistent.

Q: What should I do if the projector says the lamp is not recognized after replacement?

A: First check whether you've reset the lamp hours — the vast majority of alerts are caused by the timer not being reset. If the error persists after resetting, contact Zorsika technical support, and we'll provide the reset method and troubleshooting guidance for your specific model.

Q: Is there an installation tutorial for the 400-0402-00?

A: Yes. The lamp door location and installation steps for these Projectiondesign models are basically the same. Contact Zorsika sales to get illustrated or video tutorials for your specific model.

Q: How long is the lamp warranty?

A: The Zorsika PRO series projector lamp comes with a 180-day warranty. Normal use with non-human damage (such as lamp explosion or abnormal early brightness degradation) is covered by after-sales service; brightness degradation within the standard range is normal wear and is not covered by warranty.

Related Links

• Zorsika Technical Support Center
• Projector Brand & Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Database

Purchase Inquiry

For solution consultation, bulk orders, or the complete compatible model list for the Projectiondesign 400-0402-00, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article all come from the Zorsika product database. Data is continuously updated; please confirm with an actual inquiry.