Projectiondesign 400-0500-00 Projector Lamp for cineo32 F3+ F32 1080p F32 WUXGA F35 WQXGA and 12

If your Projectiondesign projector in the conference room or classroom suddenly dims, don't rush to call for repairs. First check whether the lamp is due for replacement: 400-0500-00 covers 12 Projectiondesign models. Read on for the specs and replacement tips.

Projectiondesign 400-0500-00 Compatible Projector Models (12 in total)

The following are verified compatible Projectiondesign projector models for 400-0500-00, separated by commas:

cineo32, F3+, F32 1080p, F32 WUXGA, F35 WQXGA, F32 SXGA+, F32 XGA, cineo32 1080, F35 WUXGA, F35 AS3D, cineo35 2.5k, cineo12

Note: Projectors of the same generation often share the same lamp module. For models not listed, contact Zorsika technical support for confirmation.

Specifications of This Lamp

The above parameters come from the Zorsika product database. Contact sales for the complete technical specification sheet.

Frequently Asked Questions

Q: What should I do if the projector says the lamp is not recognized after replacement?

A: First check whether the lamp timer has been reset. The vast majority of such messages are caused by an uncleared timer. If the error persists after resetting, contact Zorsika technical support — we provide the reset procedure and troubleshooting guidance for the corresponding model.

Q: How do I choose between original packaged, original bare, and replacement lamps?

A: If you want stable brightness and long-term reliability, the Zorsika PRO series lamp is the first choice — it matches the original parameters item by item, is individually powered-on tested before leaving the factory, matches original performance, is more worry-free overall, and comes with a 180-day warranty. For routine business, education, and conference room use, the PRO series is also the more worry-free option overall. Other replacement lamps cost less, but the source of the arc tube and quality control vary widely, with higher risk of brightness decay and shortened lifespan — they are only recommended for temporary backup machines.

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO series lamp is "original parameters, independent quality control": power, arc gap, and reflector size all match the original item by item, but with an extra individual power-on test before leaving the factory and a 180-day warranty. Compared with the original, it is more worry-free overall; compared with other replacement options, quality control is more consistent.

Q: Is there an installation guide for 400-0500-00?

A: Yes. The lamp door location and removal/installation steps for these Projectiondesign models are basically the same. Contact Zorsika sales for illustrated or video guides for the corresponding model.

Q: How long is the lamp warranty?

A: Zorsika PRO series projector lamps come with a 180-day warranty. Normal use with non-human-caused damage (such as lamp explosion or abnormal early brightness decay) is covered by after-sales service; brightness decay within the standard range is normal wear and is not covered by the warranty.

Same Specs, Why We Recommend Zorsika PRO

For high-volume standard lamp modules like 400-0500-00, the Zorsika PRO series offers an alternative with the same specs as the original: power, arc gap, and reflector size all match the original item by item, each unit is individually powered-on tested before leaving the factory, and it is ready to install without structural modification.

• Spec Matching: Power, arc gap, and reflector size matched to original parameters item by item
• Individual Testing: Each unit powered-on tested before leaving the factory, ensuring brightness and stability
• Warranty Commitment: 180-day lamp warranty; normal use with non-human-caused damage covered by after-sales service
• Stable Supply: Supports bulk purchasing and project supply

In one sentence: if you want original quality with a more worry-free overall experience, the Zorsika PRO series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is heavily affected by machine condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. Before bulk purchasing, we recommend getting 1-2 samples for power-on testing.

Routine Maintenance to Make Your Lamp Last Longer

• Clean dust promptly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in ordinary office environments, every 3-6 months.
• Use eco mode: This lamp supports dual power of 300W / 250W. Switching to eco mode for everyday presentations significantly reduces the lamp's thermal load.
• Avoid frequent on/off cycling: Thermal cycling is one of the main causes of lamp wear. If not in use for a short time, use the shutter function instead of repeatedly cutting power.
• Shut down properly: After shutting down, wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp timer in the menu, otherwise the projector will keep alerting based on the old timer.

Related Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Purchasing Inquiry

For solution consultation, bulk plans, or the complete compatible model list for Projectiondesign 400-0500-00, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specification parameters, and compatible model data in this article all come from the Zorsika product database. Data is continuously updated; please confirm with an actual quotation.