Projectiondesign 400-0600-00 Projector Lamp Compatible Models

No need to read the manual: the core specs of the Projectiondesign 400-0600-00 projector lamp, its 9 compatible projector models, and the three things you should confirm before buying are all in this article.

Specifications at a Glance

The specifications above come from the Zorsika product database. Contact sales if you need the full technical datasheet.

Compatible Projector Models: 9 Projectiondesign Projectors

The following are verified compatible Projectiondesign projector models for the 400-0600-00, with models separated by commas:

F12, F30, F12 WUXGA, F12 1080p, F12 SXGA+, F10 AS3D, cineo12, F80 WUXGA, ACTION M25

Note: Projectors of the same generation often share the same lamp module. For models not on this list, contact Zorsika technical support to confirm compatibility.

Same Specs, So Why Choose Zorsika PRO

For high-volume standard lamp modules like the 400-0600-00, the Zorsika PRO series offers an alternative with the same specs as the original, matching power, arc gap, and reflector size item by item against the original, with each unit lit and tested before leaving the factory. It is ready to use on installation with no structural modifications needed.

• Spec matching: Power, arc gap, and reflector size matched item by item to original parameters
• Individual testing: Each unit lit and tested before leaving the factory, ensuring brightness and stability
• Warranty commitment: 180-day lamp warranty; normal use without human damage is covered by after-sales service
• Stable supply: Supports bulk purchasing and project supply

In short: if you want original-quality performance with less hassle overall, the Zorsika PRO series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is heavily affected by the projector's condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. Before bulk purchasing, we recommend getting 1-2 samples for lighting tests.

Frequently Asked Questions

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO series lamp is "original parameters, independent quality control": power, arc gap, and reflector size are matched item by item to the original, but with an extra individual lighting test before leaving the factory and a 180-day warranty. Compared to the original, it is less hassle overall; compared to other alternatives, quality control is more consistent.

Q: How do I choose between original packaged, original bare, and replacement?

A: If you want stable brightness and long-term reliability, the Zorsika PRO series lamp is the first choice—matched item by item to original parameters, individually lit and tested before leaving the factory, performance on par with the original with less hassle overall, and backed by a 180-day warranty. For routine business and education use and conference rooms, the PRO series is also less hassle overall. Other replacement lamps cost less, but arc tube sources and quality control vary widely, with higher risk of brightness degradation and shortened lifespan. They are only recommended for temporary backup projectors.

Q: What should I do if the projector says the lamp is not recognized after replacement?

A: First confirm whether the lamp timer has been reset. The vast majority of such messages are caused by the timer not being cleared. If the error persists after resetting, contact Zorsika technical support; we provide reset methods and troubleshooting guidance for the corresponding model.

Q: My projector is not on the list of 9 models above. Can it use the 400-0600-00?

A: The list covers verified models, not all of them. Projectiondesign products of the same generation often share lamp modules. Take photos of the projector nameplate and the original lamp label and send them to Zorsika technical support to confirm compatibility.

Q: Is there an installation guide for the 400-0600-00?

A: Yes. The lamp door location and removal/installation steps are basically the same across these Projectiondesign models. Contact Zorsika sales for illustrated or video guides for the corresponding model.

Q: How long is the lamp warranty?

A: The Zorsika PRO series projector lamp comes with a 180-day warranty. Normal use without human damage (such as lamp explosion or abnormal early brightness degradation) is covered by after-sales service; brightness degradation within the standard range is normal wear and is not covered by the warranty.

Three Things to Check Before Purchasing

1. Check the nameplate model: Open the projector's lamp door; the model on the lamp module label should exactly match 400-0600-00. Some Projectiondesign models have suffix differences such as -V or +, but the lamp module is usually compatible. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp form: The same model comes in four forms: original packaged, original bare, replacement, and used, which differ considerably. Original bare means an original arc tube paired with a third-party lamp frame, usually offering the best overall value. When purchasing, be sure to specify clearly on the order which form you want to avoid disputes after delivery.
3. Check the physical specs: Reflector size 45X45D, socket E19, and arc gap must match the original lamp. If any one of these does not match, the lamp may not fit or may not light up.

After Replacing the Lamp, Pay Attention to These Points

• Clean dust promptly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in ordinary office environments, every 3-6 months.
• Use eco mode: This lamp supports dual power of 220W / 170W. Switching to eco mode for everyday presentation scenarios noticeably reduces the lamp's thermal load.
• Avoid frequent switching: Thermal cycling is one of the main causes of lamp wear. If not using the projector for a short time, use the shutter function instead of repeatedly cutting power.
• Shut down properly: After shutting down, wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp timer in the menu, otherwise the projector will keep alerting based on the old timer.

Related Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Database

Purchasing Inquiries

For solution consultation, bulk plans, or the complete compatible model list for the Projectiondesign 400-0600-00, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article all come from the Zorsika product database. Data is continuously updated; please confirm with an actual quote.