Zorsika WB011 Projector Lens Compatible Models: Sharp XG-EC500UA XG-EC550XA XG-EC600UA XG-EC650XA

Picture too small or installation distance not enough? Changing a lens solves it. WB011 fits 4 Sharp projector models — see the list below.

WB011 Compatible Projector Models (4 total, with brightness/resolution/zoom ratio)

The following are verified compatible models for WB011 (Sharp projectors), with brightness, resolution, and zoom ratio listed for each:

Note: Brightness, resolution, and zoom ratio are taken from the Zorsika product database (refer to the model nameplate/manual for accuracy); lens compatibility is based on the chassis interface and optical structure. For models not listed, contact Zorsika technical support for confirmation.

Lens Specifications

The above parameters come from the Zorsika product database. Contact sales for the complete technical specification sheet.

Frequently Asked Questions

Q: What if the lens doesn't match the picture size?

A: First confirm the model's lens interface and optical axis position, then choose a lens with the corresponding throw ratio based on your actual installation distance. If unsure, send your installation distance and screen size to Zorsika technical support and we'll recommend one for you.

Q: My projector isn't in the 4-model list above — can I use WB011?

A: The list covers verified models, not all models. Engineering projectors of the same brand and generation often share the same lens interface. It's safer to send a photo of the nameplate and original lens to Zorsika technical support for confirmation.

Q: Can the lens replace the original one?

A: The lens is the core of the projection light path and directly determines clarity and color. Zorsika lenses (model shown in the specification table above) are benchmarked item by item against original optical parameters (focal length, throw ratio, lens group), with consistent lens coating processes — delivering sharp imaging with no blurry edges. Ordinary replacement lenses often use standard glass elements with insufficient coating layers, making brightness loss and color shift obvious at a glance. For engineering and exhibition scenarios, Zorsika is recommended.

Q: Why choose Zorsika instead of the original manufacturer?

A: Zorsika lenses are produced according to original optical drawings, with lens groups, coatings, and throw ratios benchmarked item by item, and each unit undergoes resolution testing before leaving the factory. Compared to the original manufacturer, lead times are shorter and overall value is better; compared to other replacement lenses, optical quality is backed by data.

Q: How long is the lens warranty?

A: All Zorsika projector lenses come with a 12-month warranty. Under normal use, non-human damage (such as impact, water damage, or unauthorized disassembly) can be handled directly through after-sales service. The warranty period is based on the date on the shipping document.

Why Choose Zorsika

Zorsika provides original-spec replacement lenses for WB011, with key parameters benchmarked item by item against the original, and supports bulk project procurement and supply.

Zorsika original-spec replacement model, compatible with Sharp XG-EC500UA, XG-EC550XA, XG-EC600UA, XG-EC650XA and other 4 models; enter WB011 in the Zorsika official website query system to see the complete model compatibility list.

• Optical Benchmarking: Focal length, throw ratio, and lens group matched to original parameters
• Resolution Testing: Each unit tested before shipping, with MTF data available
• Coating Process: Lens coatings at the same level as the original, reducing light loss
• Stable Supply: Supports bulk procurement and project supply

In short: the lens is the optical core — don't gamble on picture quality to save a few dollars. Zorsika projector lenses are produced according to original drawings and offer better overall value.

Note: Actual imaging performance is affected by the projector's condition and installation environment. Before bulk procurement, we recommend ordering 1 unit for testing.

What to Watch Out For When Changing a Lens

• Power off before changing the lens: Before removing or installing the lens, be sure to shut down and wait for the cooling fan to stop, to avoid damaging the interface while powered on.
• Don't touch the lens elements: Fingerprints and oil will directly affect image quality. Hold the lens by the barrel, not the glass. Use an air blower to gently remove dust — don't wipe with a dry cloth.
• Focus first, then tighten: After installing properly, test focus first, then tighten the fixing screws to avoid loosening over time that causes image drift.
• Keep the interface clean: Dust buildup on the mount and contacts can cause poor contact. Cleaning them while changing the lens is a safer practice.

Related Query Links

• Zorsika Technical Support Center
• Projector Brand & Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Catalog

Procurement Inquiry

For Zorsika WB011 solution consultation, project proposals, or the complete model compatibility list, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lens model and compatible model data in this article come from the Zorsika product database. Data is continuously updated; please confirm with an actual quotation.