Optoma BL-FP280i Projector Lamp for W307UST: OEM Replacement

When replacing an Optoma projector lamp, the most time-consuming part is often not the installation itself, but confirming whether the model matches. The BL-FP280i covers 1 Optoma model. This article lays out the specifications, compatible projector models, and key verification points all at once.

Specifications at a Glance

The above parameters come from the Zorsika product database. For a complete technical specification sheet, please contact sales.

Where It Works: List of 1 Optoma Model

The following are verified compatible models for the BL-FP280i among Optoma projectors, with models separated by commas:

W307UST

Note: Projectors of the same generation often share the same lamp module. For models not on this list, please contact Zorsika technical support for confirmation.

Three Points to Verify Before Purchasing

1. Check the nameplate model: Open the projector's lamp door. The model on the lamp module label should exactly match BL-FP280i. Some Optoma models have suffix variations such as -V or +, but the lamp module is usually interchangeable. If unsure, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp type: The same model comes in four types: original packaged, original bare, compatible, and used. These four types differ significantly. Original bare means an original arc tube paired with an aftermarket frame, which typically offers the best overall value. When ordering, be sure to specify clearly which type you need to avoid disputes after delivery.
3. Verify physical specifications: The reflector size 00X51D, socket E20.8, and arc gap must all match the original lamp. If any one of these does not match, the lamp may not fit or may fail to light up.

Why Choose Zorsika PRO Series

The BL-FP280i is a relatively high-volume model. The Zorsika PRO series applies consistency control to the arc tube according to original factory parameters and adds an extra factory lighting test, providing greater assurance of brightness and stability.

• Specification matching: Power, arc gap, and reflector size are matched item by item to original factory parameters
• Individual testing: Each unit is lit and tested before leaving the factory, ensuring brightness and stability
• Warranty commitment: 180-day warranty on the lamp; after-sales service is available for normal use and non-human damage
• Stable supply: Supports bulk purchasing and project supply

In one sentence: If you want original-quality performance with greater overall peace of mind, the Zorsika PRO series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is significantly affected by machine condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. It is recommended to obtain 1-2 sample units for lighting tests before bulk purchasing.

Routine Maintenance to Make the Lamp Last Longer

• Clean dust promptly: Dust accumulation on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in ordinary office environments, every 3-6 months.
• Use eco mode: Use eco mode whenever brightness is sufficient to reduce the lamp's thermal load.
• Avoid frequent on/off cycling: Thermal cycling is one of the main sources of lamp wear. If not using the projector for a short time, use the blank/mute function instead of repeatedly cutting power.
• Shut down properly: After shutting down, wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, which is a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp hours in the menu; otherwise the projector will continue to alert based on the old timer.

Frequently Asked Questions

Q: My machine is not on the list of 1 model above. Can I use the BL-FP280i?

A: The list contains verified models, but it does not represent all compatible models. Optoma products of the same generation often share lamp modules. Take a photo of the projector nameplate and the original lamp label and send them to Zorsika technical support, and we can help confirm compatibility.

Q: How do I choose between original packaged, original bare, and compatible?

A: If you want stable brightness and long-term reliability, the Zorsika PRO series lamp is the first choice — matched item by item to original factory parameters, individually lit and tested before leaving the factory, with performance benchmarked to the original and greater overall peace of mind, plus a 180-day warranty. For routine commercial education and conference room use, the PRO series is also the more worry-free option overall. Although other replacement lamps cost less, the arc tube sources and quality control vary greatly, with higher risk of brightness degradation and shortened lifespan. They are only recommended for temporary backup machines.

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO series lamp is "original parameters, independent quality control": power, arc gap, and reflector size are benchmarked item by item to the original, but an extra individual lighting test is added before leaving the factory, with a 180-day warranty. Compared with the original, it offers greater overall peace of mind; compared with other replacement options, it offers more stable quality control.

Q: What should I do if the machine says the lamp is not recognized after replacement?

A: First confirm whether the lamp hours have been reset. The vast majority of such alerts are caused by the timer not being cleared. If the error persists after resetting, contact Zorsika technical support; we provide reset methods and troubleshooting guidance for the corresponding model.

Q: Is there an installation tutorial for the BL-FP280i?

A: Yes. The lamp door location and installation steps for these Optoma models are basically the same. Contact Zorsika sales to obtain illustrated or video tutorials for the corresponding model.

Q: How long is the lamp warranty?

A: The Zorsika PRO series projector lamp comes with a 180-day warranty. After-sales service is available for normal use and non-human damage (such as lamp explosion or abnormal early light decay); brightness degradation within the standard range is normal wear and is not covered by the warranty.

Related Query Entries

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Purchasing Inquiry

For solution consultation, bulk plans, or a complete compatible model list for the Optoma BL-FP280i, please contact us via the following:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specification parameters, and compatible model data in this article all come from the Zorsika product database. The data is continuously updated; please refer to actual inquiry confirmation.