Optoma BL-FS180A Projector Lamp Compatible Models: DS302 EX990S DS303 SP7600 CP705 FS704 DX602

When replacing an Optoma projector lamp, the most time-consuming part is often not the installation itself, but confirming whether the model matches. The BL-FS180A covers 18 Optoma projector models. This article lays out the specifications, compatible models, and key verification points all at once.

Lamp Module Specifications

The above specifications come from the Zorsika product database. For the complete technical datasheet, please contact sales.

Compatible Models: 18 Optoma Projectors

The following are verified compatible models for the BL-FS180A among Optoma projectors, with model numbers separated by commas:

DS302, EX990S, DS303, SP7600, CP705, FS704, DX602, EP709, EP709S, EP706, EP706S, DX609, DX603, DV11, U2, U3, DVD100, LS718

Note: Projectors of the same generation often share the same lamp module. For models not listed, please contact Zorsika technical support for confirmation.

Three Points to Verify Before Purchase

1. Check the nameplate model: Open the projector's lamp door, and the model on the lamp module label should exactly match BL-FS180A. Some Optoma models have suffix variations such as -V or +, but the lamp module is usually interchangeable. If unsure, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp type: The same model comes in four types: original packaged, original bare, compatible, and used — and the differences are significant. Original bare means an original arc tube paired with an aftermarket frame, which typically offers the best overall value. Always specify which type you need on the order to avoid disputes after delivery.
3. Verify physical specifications: The reflector size 00X51D and arc gap must match the original lamp. If any one of these doesn't match, the lamp may not fit or may fail to light.

Same Specifications — Why Choose Zorsika PRO

For high-volume standard lamp modules like the BL-FS180A, the Zorsika PRO series offers an original-equivalent alternative, with power, arc gap, and reflector size matched item by item to the original. Each unit is lit and tested before leaving the factory — plug and play, no modification needed.

• Specification matching: Power, arc gap, and reflector size matched item by item to original parameters
• Individual testing: Each unit lit and tested before shipment, ensuring brightness and stability
• Warranty commitment: 180-day lamp warranty; normal use with non-human damage qualifies for after-sales service
• Stable supply: Supports bulk purchasing and project supply

In short: if you want original-quality performance with greater peace of mind, the Zorsika PRO series projector lamp is made for exactly this scenario.

Note: Brightness, lifespan, and other performance metrics are significantly affected by machine condition, operating environment, and cooling conditions. Zorsika does not make uniform numerical promises. We recommend ordering 1-2 samples for lighting tests before bulk purchasing.

Routine Maintenance to Extend Lamp Life

• Clean dust promptly: Dust buildup on air intakes and air filters directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in typical office environments, every 3-6 months.
• Use eco mode: Use eco mode whenever brightness is sufficient to reduce the lamp's thermal load.
• Avoid frequent on/off cycling: Thermal cycling is a major source of lamp wear. If not using the projector for a short period, use the blank/mute function instead of repeatedly cutting power.
• Shut down properly: After powering off, wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp hours in the menu, otherwise the projector will continue to alert based on the old timer.

Frequently Asked Questions

Q: My projector isn't in the 18-model list above — can I use the BL-FS180A?

A: The list covers verified models but is not exhaustive. Optoma products of the same generation often share the same lamp module. Take a photo of the projector nameplate and the original lamp label and send them to Zorsika technical support to confirm compatibility.

Q: How do I choose between original packaged, original bare, and compatible?

A: If you want stable brightness and long-term reliability, the Zorsika PRO series lamp is the top choice — matched item by item to original parameters, each unit lit and tested before shipment, with performance on par with the original and greater peace of mind, backed by a 180-day warranty. For routine business, education, and conference room use, the PRO series is also the more worry-free option overall. Other replacement lamps cost less but vary widely in arc tube sourcing and quality control, with higher risks of brightness degradation and shortened lifespan — recommended only for temporary backup machines.

Q: Why choose Zorsika PRO instead of the original?

A: The core principle of the Zorsika PRO series is "original parameters, independent quality control": power, arc gap, and reflector size matched item by item to the original, plus an extra individual lighting test before shipment and a 180-day warranty. Compared to the original, it offers greater peace of mind; compared to other alternatives, it offers more consistent quality control.

Q: What should I do if the projector says the lamp is not recognized after replacement?

A: First check whether you performed the lamp hour reset — the vast majority of alerts are caused by an uncleared timer. If the error persists after resetting, contact Zorsika technical support; we provide reset methods and troubleshooting guidance for the corresponding model.

Q: Is there an installation tutorial for the BL-FS180A?

A: Yes. The lamp door location and removal/installation steps are essentially the same across these Optoma models. Contact Zorsika sales for illustrated or video tutorials for your specific model.

Q: How long is the lamp warranty?

A: The Zorsika PRO series projector lamp comes with a 180-day warranty. Normal use with non-human damage (such as lamp explosion or abnormal early brightness degradation) qualifies for after-sales service. Brightness degradation within the standard range is normal wear and is not covered by the warranty.

Related Resources

• Zorsika Technical Support Center
• Projector Brand & Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Catalog

Purchase Inquiry

For solution consultation, bulk orders, or the complete compatible model list for the Optoma BL-FS180A, please contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article are all from the Zorsika product database. Data is continuously updated; please confirm with an actual inquiry.