Optoma BL-FS300B Projector Lamp Compatible Models: EP910 HD80 HD8000 HD81 HD81LV HD800X HD7200

No need to read the manual: the key specs of the Optoma BL-FS300B projector lamp, its 17 compatible projector models, and the three things you should confirm before buying are all in this article.

Specifications of This Lamp

The above specifications come from the Zorsika product database. Contact sales for the complete technical datasheet.

Optoma BL-FS300B Model Compatibility List (17 Models)

The following are verified compatible Optoma projector models for the BL-FS300B, separated by commas:

EP910, HD80, HD8000, HD81, HD81LV, HD800X, HD7200, HD8000LV, HD803, HD803LV, HD806, HD8061SF, HD80LV, HD930, HD980, HT1080, HT1200

Note: Projectors of the same generation often share the same lamp module. For models not on this list, contact Zorsika technical support for confirmation.

Same Specs, Why We Recommend Zorsika PRO

The Zorsika PRO series offers an OEM-spec replacement lamp module for the BL-FS300B, with key parameters matched item by item to the original. It supports project supply and bulk purchasing, with more controllable lead times.

• Spec Matching: Power, arc gap, and reflector size matched item by item to original parameters
• Individual Testing: Each unit is lit and tested before leaving the factory, ensuring brightness and stability
• Warranty Commitment: 180-day warranty on the lamp; normal use with non-human damage qualifies for after-sales service
• Stable Supply: Supports bulk purchasing and project supply

In one sentence: if you want original-quality performance with greater peace of mind, the Zorsika PRO series projector lamp is made for exactly this scenario.

Note: Brightness, lifespan, and other performance aspects are significantly affected by machine condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. We recommend ordering 1-2 samples for lighting tests before bulk purchasing.

Frequently Asked Questions

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO series lamp is "original parameters, independent quality control": power, arc gap, and reflector size are matched item by item to the original, but with an extra individual lighting test before leaving the factory, plus a 180-day warranty. Compared to the original, it offers greater peace of mind; compared to other alternatives, it offers more consistent quality control.

Q: How do I choose between original packaged, original bare, and generic?

A: If you want stable brightness and long-term reliability, the Zorsika PRO series lamp is the first choice—matched item by item to original parameters, individually lit and tested before leaving the factory, with performance on par with the original, greater peace of mind, and a 180-day warranty. For routine business, education, and conference room use, the PRO series is also the more worry-free option. Other replacement lamps may cost less, but arc tube sources and quality control vary widely, with higher risks of brightness degradation and shortened lifespan. They are only recommended for temporary backup machines.

Q: What should I do if the projector says the lamp is not recognized after replacement?

A: First check whether the lamp timer has been reset. The vast majority of such alerts are caused by the timer not being cleared. If the error persists after resetting, contact Zorsika technical support—we provide reset methods and troubleshooting guidance for the corresponding model.

Q: My machine isn't on the list of 17 models above. Can I use the BL-FS300B?

A: The list covers verified models, not all of them. Optoma products of the same generation often share lamp modules. Take a photo of the machine's nameplate and the original lamp label and send it to Zorsika technical support to confirm compatibility.

Q: Is there an installation guide for the BL-FS300B?

A: Yes. The lamp door location and removal/installation steps are basically the same across these Optoma models. Contact Zorsika sales for illustrated or video guides for your specific model.

Q: How long is the lamp warranty?

A: The Zorsika PRO series projector lamp comes with a 180-day warranty. Normal use with non-human damage (such as lamp explosion or abnormal early brightness degradation) qualifies for after-sales service; brightness degradation within the standard range is normal wear and is not covered by warranty.

Before Ordering, Check These Three Things

1. Check the nameplate model: Open the projector's lamp door—the model on the lamp module label should exactly match BL-FS300B. Some Optoma models have suffix differences like -V or +, but the lamp module is usually compatible. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp form: The same model comes in four forms—original packaged, original bare, generic, and used—and the differences are significant. Original bare means an original arc tube paired with an aftermarket frame, which typically offers the best overall value. When ordering, be sure to specify which form you want on the order to avoid disputes after delivery.
3. Verify physical specs: Reflector size 56X56D, socket E21.8, and arc gap must all match the original lamp. Any mismatch may prevent installation or prevent the lamp from lighting up.

After Replacing the Lamp, Pay Attention to These Points

• Clean dust promptly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in typical office environments, every 3-6 months.
• Use eco mode: This lamp supports dual power of 300W / 250W. Switching to eco mode for routine presentations can significantly reduce the lamp's thermal load.
• Avoid frequent on/off cycling: Thermal cycling is a major source of lamp wear. If not in use for a short time, use the blank/mute function instead of repeatedly cutting power.
• Shut down properly: After shutting down, wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp timer in the menu, otherwise the projector will continue to alert based on the old timer.

Related Resources

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Database

Purchase Inquiry

For solution consultation, bulk plans, or the complete compatible model list for the Optoma BL-FS300B, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article all come from the Zorsika product database. Data is continuously updated; please refer to actual inquiry confirmation.