Epson ELPLP80 Projector Lamp Compatible Models: CB-1430Wi CB-580 CB-585W CB-1420Wi CB-585Wi

If your Epson projector in a meeting room or classroom suddenly dims, don't rush to call for repairs. First check whether the lamp is due for replacement: the ELPLP80 covers 7 Epson models. Read on for specs and replacement tips.

Compatible projector models: 7 Epson projectors

The following are verified compatible Epson projector models for the ELPLP80, with model numbers separated by commas:

CB-1430Wi, CB-580, CB-585W, CB-1420Wi, CB-585Wi, CB-595Wi, ELPLP80

Note: Projectors of the same generation often share the same lamp module. For models not listed, contact Zorsika technical support for confirmation.

Specifications of this lamp

The above parameters come from the Zorsika product database. For the complete technical specification sheet, contact sales to request it.

Frequently asked questions

Q: What should I do if the projector says the lamp is not recognized after replacement?

A: First confirm whether the lamp timer has been reset. The vast majority of such prompts are caused by the timer not being cleared. If the error persists after resetting, contact Zorsika technical support — we provide the reset method and troubleshooting guidance for the corresponding model.

Q: How do I choose between original packaged, original bare, and replacement lamps?

A: If you want stable brightness and long-term reliability, the Zorsika PRO series lamp is the first choice — each parameter is matched to the OEM specifications item by item, every lamp is powered on and tested before leaving the factory, performance is benchmarked against the OEM, and it comes with a 180-day warranty. For routine business and education use and meeting rooms, the PRO series is also the more worry-free choice overall. Other replacement lamps cost less, but the source of the arc tube and quality control vary widely, with higher risk of brightness decay and shortened lifespan — they are only recommended for temporary backup machines.

Q: Why choose Zorsika PRO instead of the OEM lamp?

A: The core logic of the Zorsika PRO series lamp is "OEM parameters, independent quality control": power, arc gap, and reflector size are benchmarked against the OEM item by item, but with an extra step of power-on testing for every lamp before it leaves the factory, plus a 180-day warranty. Compared with the OEM, it is more worry-free overall; compared with other replacement options, quality control is more consistent.

Q: Is there an installation tutorial for the ELPLP80?

A: Yes. The lamp door location and removal/installation steps are basically the same across these Epson models. Contact Zorsika sales to obtain the illustrated or video tutorial for the corresponding model.

Q: How long is the lamp warranty?

A: Zorsika PRO series projector lamps come with a 180-day warranty. Under normal use and non-human-caused damage (such as lamp explosion or abnormal early light decay), after-sales service applies; brightness decay within the standard range is normal wear and tear and is not covered by the warranty.

Why choose the Zorsika PRO series

For high-volume standard lamp modules like the ELPLP80, the Zorsika PRO series offers a replacement solution with the same specifications as the OEM: power, arc gap, and reflector size are benchmarked against the OEM item by item, every lamp is powered on and tested before leaving the factory, and it is ready to use once installed with no structural modification needed.

• Specification benchmarked: Power, arc gap, and reflector size matched to OEM parameters item by item
• Individual testing: Every lamp is powered on and tested before leaving the factory, ensuring brightness and stability
• Warranty commitment: 180-day lamp warranty; normal use with non-human-caused damage is covered by after-sales service
• Stable supply: Supports bulk purchasing and project supply

In one sentence: if you want OEM quality while being more worry-free overall, the Zorsika PRO series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is greatly affected by machine condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. Before bulk purchasing, we recommend getting 1-2 sample units for power-on testing.

Routine maintenance to make your lamp last longer

• Clean dust promptly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in ordinary office environments, every 3-6 months.
• Use eco mode: Use eco mode whenever brightness is sufficient to reduce the lamp's heat load.
• Avoid frequent switching: Hot-cold cycling is one of the main causes of lamp wear. If you won't use it for a short time, use the blank/shutter function instead of repeatedly cutting power.
• Shut down properly: After shutting down, wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp timer in the menu, otherwise the projector will keep alerting based on the old timer.

Related links

• Zorsika Technical Support Center
• Projector brand and compatible model lookup
• Projector lamp / lens / air filter product library

Purchasing inquiries

For solution consultation, bulk plans, or the complete compatible model list for the Epson ELPLP80, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specification parameters, and compatible model data in this article all come from the Zorsika product database. Data is continuously updated; please confirm with an actual quotation.