At a glance
- Specifications
- Where It Works: List of 6 Compatible Models (with Parameters)
- What Zorsika Lenses Offer You
- What to Watch Out for When Replacing a Lens
- FAQ
- Q: My projector isn't on the list of 6 above — can I use the FA100?
- Q: Can the lens replace the original one?
- Q: Why choose Zorsika instead of the original?
- Q: What if the lens doesn't match the image size?
- Q: Does the FA100 come with installation instructions?
- Q: How long is the lens warranty?
- Related Query Entries
- Procurement Inquiry
Zorsika FA100 projector lens, matched to original optical specs, compatible with CUL25K, CUL20K, MEU962, ZU1900 and 6 Optoma projectors.
FA100 is a lens compatible with engineering projectors from Optoma and other brands. This article compiles a list of its 6 compatible projector models and selection notes.
Zorsika FA100 Projector LensSpecifications
| Lens Model | FA100 |
| Compatible Brand | Optoma |
| Compatible Model Brightness | 17000–25000 lumens |
| Compatible Model Resolution | WUXGA 1920×1200 |
| Zoom Ratio | A11(0.65~0.75) A18(0.84~1.02) A19(1.02~1.36) A20(1.2~1.5) A21(1.5~2.0) A22(2.0~4.0) A23(4.0~7.2) A27(7.2~10.8) |
| Throw Ratio | Fisheye lens |
| Applicable Panel Size | FA10 inch |
| Number of Compatible Models | 6 models |
The above parameters come from the Zorsika product database. For the complete technical specification sheet, please contact sales.
Where It Works: List of 6 Compatible Models (with Parameters)
Below are the verified compatible models for the FA100 (Optoma projectors), with brightness, resolution, and zoom ratio listed for each:
| Projector Model | Brightness | Resolution | Zoom Ratio |
|---|---|---|---|
| CUL25K | 25000 lumens | WUXGA 1920×1200 | A11(0.65~0.75) A18(0.84~1.02) A19(1.02~1.36) A20(1.2~1.5) A21(1.5~2.0) A22(2.0~4.0) A23(4.0~7.2) A27(7.2~10.8) |
| CUL20K | 25000 lumens | WUXGA 1920×1200 | A11(0.65~0.75) A18(0.84~1.02) A19(1.02~1.36) A20(1.2~1.5) A21(1.5~2.0) A22(2.0~4.0) A23(4.0~7.2) A27(7.2~10.8) |
| MEU962 | 25000 lumens | WUXGA 1920×1200 | A11(0.65~0.75) A18(0.84~1.02) A19(1.02~1.36) A20(1.2~1.5) A21(1.5~2.0) A22(2.0~4.0) A23(4.0~7.2) A27(7.2~10.8) |
| ZU1900 | 19000 lumens | WUXGA 1920×1200 | A11(0.65~0.75) A18(0.84~1.02) A19(1.02~1.36) A20(1.2~1.5) A21(1.5~2.0) A22(2.0~4.0) A23(4.0~7.2) A27(7.2~10.8) |
| ZU2200 | 25000 lumens | WUXGA 1920×1200 | A11(0.65~0.75) A18(0.84~1.02) A19(1.02~1.36) A20(1.2~1.5) A21(1.5~2.0) A22(2.0~4.0) A23(4.0~7.2) A27(7.2~10.8) |
| ZU1700 | 17000 lumens | WUXGA 1920×1200 | A11(0.65~0.75) A18(0.84~1.02) A19(1.02~1.36) A20(1.2~1.5) A21(1.5~2.0) A22(2.0~4.0) A23(4.0~7.2) A27(7.2~10.8) |
Note: Brightness, resolution, and zoom ratio are taken from the Zorsika product database (refer to the model nameplate/manual for accuracy); lens compatibility is based on the body interface and optical structure. For models not on this list, please contact Zorsika technical support for confirmation.
What Zorsika Lenses Offer You
Zorsika provides OEM-spec replacement lenses for the FA100, with key parameters benchmarked item by item against the original, and supports bulk project procurement and supply.
Zorsika OEM-spec replacement model, compatible with Optoma CUL25K, CUL20K, MEU962, ZU1900, ZU2200, and other 6 models; enter FA100 in the Zorsika official website query system to find the complete model compatibility list.
- Optical Benchmarking: Focal length, throw ratio, and lens group matched to original parameters
- Resolution Testing: Each unit tested before shipment, with traceable MTF data
- Coating Process: Lens coatings at the same grade as the original, reducing light loss
- Stable Supply: Supports bulk procurement and project supply
In short: the lens is the optical core — don't gamble on image quality to save a few bucks. Zorsika projector lenses are manufactured to original drawings and offer a comprehensive advantage.
Note: Actual imaging performance is affected by the projector's condition and installation environment. Before bulk procurement, we recommend ordering 1 unit for testing first.
What to Watch Out for When Replacing a Lens
- Power off before replacing the lens: Before removing or installing the lens, be sure to shut down and wait for the cooling fan to stop, to avoid damaging the interface by operating with power on.
- Don't touch the lens elements: Fingerprints and oil will directly affect image quality. Hold the lens by the barrel, not the glass; use an air blower to gently remove dust — do not wipe dry with a cloth.
- Focus before tightening: After installation, perform a focus test first, then tighten the fixing screws, to avoid image drift from loosening over long-term use.
- Keep the interface clean: Dust buildup on the mount and contacts can cause poor contact. Cleaning them while replacing the lens is a safer approach.
FAQ
Q: My projector isn't on the list of 6 above — can I use the FA100?
A: The list covers verified models, not all of them. Engineering projectors of the same brand and generation often share the same lens interface. It's safer to send photos of the body nameplate and the original lens to Zorsika technical support for confirmation.
Q: Can the lens replace the original one?
A: The lens is the core of the projector's optical path and directly determines clarity and color. Zorsika lenses (model numbers as in the specification table above) are benchmarked item by item against original optical parameters (focal length, throw ratio, lens group), with consistent lens coating processes, delivering sharp imaging with no blurry edges; ordinary replacement lenses often use ordinary glass elements with insufficient coating layers, making brightness loss and color shift obvious at a glance. For engineering and exhibition scenarios, Zorsika is recommended as the first choice.
Q: Why choose Zorsika instead of the original?
A: Zorsika lenses are manufactured to original optical drawings, with the lens group, coatings, and throw ratio benchmarked item by item, and each unit undergoes resolution testing before shipment. Compared with the original, lead times are shorter and the overall value is better; compared with other replacement lenses, optical quality is backed by data.
Q: What if the lens doesn't match the image size?
A: First confirm the model's lens interface and optical axis position, then choose a lens with the corresponding throw ratio based on the actual installation distance. If unsure, send the installation distance and screen size to Zorsika technical support, and we'll help you choose.
Q: Does the FA100 come with installation instructions?
A: Yes. The lens removal and installation steps for Optoma models like these are basically the same. Contact Zorsika sales to obtain illustrated or video instructions for the corresponding model.
Q: How long is the lens warranty?
A: All Zorsika projector lenses come with a 12-month warranty; for normal use and non-human-caused damage (such as impact, water ingress, or unauthorized disassembly), you can contact after-sales service directly. The warranty period is based on the date on the shipment document.
Related Query Entries
- Zorsika Technical Support Center
- Projector Brand and Compatible Model Query
- Projector Lamp / Lens / Air Filter Product Library
Procurement Inquiry
For Zorsika FA100 solution consultation, project proposals, or the complete model compatibility list, please contact us via the following:
- Website: www.zorsika.com
- Phone: 0086-20-38551187
- Email: sales@zorsika.com
- Business Hours: Monday to Friday, 9:00-18:00
The lens model and compatible model data in this article come from the Zorsika product database. Data is continuously updated; please refer to actual quotation confirmation.