Panasonic ET-LAL500 Projector Lamp Compatible Models: PT-X416C PT-LB353 PT-UX385C PT-UX335C

When choosing a lamp for a Panasonic projector, match the model first before anything else. The specs of the ET-LAL500 and a quick-reference list of 83 compatible projector models are as follows.

Specifications at a Glance

The above parameters come from the Zorsika product database. For the complete technical datasheet, contact sales to request it.

Compatible Projector Models: 83 Panasonic Projectors

The following are verified compatible Panasonic projector models for the ET-LAL500, with models separated by commas:

PT-X416C, PT-LB353, PT-UX385C, PT-UX335C, PT-LB383, PT-LB303, PT-X3530STC, PT-UW332C, PT-X336C, PT-TX210, PT-UX334C, PT-TW250, PT-WX3300, PT-TW340, PT-TX400, PT-TX312, PT-TW341R, PT-X382C, PT-LB300, PT-LW362, PT-LW312, PT-X412C, PT-X3231STC, PT-WW3200, PT-X316C, PT-WX3900, PT-UW363C, PT-XW331C, PT-TX402, PT-XW3333STC, PT-X3233STC, PT-X3833STC, PT-X331C, PT-XW3232STC, PT-X361C(RFL310), PT-X2730STC, PT-XW2731STC, PT-UW313C, PT-X3230STC, PT-UX413C, PT-TX310, PT-LB412, PT-WX3700, PT-UX383C, PT-UX283C, PT-LB382, PT-LB332, PT-LW280, PT-LW330, PT-LB360, PT-LB330, PT-LB280, PT-TW342, PT-TW343R, PT-UX315C, PT-UW282C, PT-UX363C, PT-WX4200, PT-WX3400, PT-XW3360STC, PT-WW3100, PT-X338C, PT-XW318C, PT-UX333C, PT-UX415C, PT-LW373, PT-LB423, PT-LW333, PT-UW317C, PT-X3861STC, PT-X3261STC, PT-XW281C, PT-XW312C, PT-XW362C, PT-X330C, PT-X332C, PT-X303C, PT-X281C, PT-X386C, PT-UX326C, PT-X3260STC, PT-XW366C, PT-UW365C

Note: Projectors of the same generation often share the same lamp module. For models not on this list, contact Zorsika technical support to confirm compatibility.

What the Zorsika PRO Series Offers You

For high-volume standard lamp modules like the ET-LAL500, the Zorsika PRO series provides an alternative built to original specifications, with power, arc gap, and reflector size matched item by item to the original. Every unit is powered on and tested before leaving the factory, so it is ready to install without any structural modification.

• Spec-for-spec matching: Power, arc gap, and reflector size matched item by item to original parameters
• Unit-by-unit testing: Each unit is powered on and tested before shipping, ensuring brightness and stability
• Warranty commitment: 180-day lamp warranty; normal use with non-human damage is covered by after-sales service
• Stable supply: Supports bulk purchasing and project supply

In short: if you want original-level quality with greater peace of mind overall, the Zorsika PRO series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is significantly affected by the projector's condition, operating environment, and cooling conditions. Zorsika does not make uniform numerical promises. Before bulk purchasing, we recommend ordering 1-2 samples for a power-on test.

Frequently Asked Questions

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO series lamp is "original parameters, independent quality control": power, arc gap, and reflector size are matched item by item to the original, but with an extra unit-by-unit power-on test before shipping and a 180-day warranty. Compared with the original, it offers greater peace of mind overall; compared with other alternatives, it offers more consistent quality control.

Q: How do I choose between original packaged, original bare, and replacement?

A: If you want stable brightness and long-term reliability, the Zorsika PRO series lamp is the first choice — matched item by item to original parameters, unit-by-unit power-on tested before shipping, performance on par with the original, greater peace of mind overall, and backed by a 180-day warranty. For routine business, education, and conference room use, the PRO series is also the more worry-free option overall. Other replacement lamps cost less, but arc tube sources and quality control vary widely, with higher risk of brightness degradation and shortened lifespan — they are only recommended for temporary backup projectors.

Q: What should I do if the projector says the lamp is not recognized after replacement?

A: First check whether the lamp timer has been reset. The vast majority of such messages are caused by the timer not being cleared. If the error persists after resetting, contact Zorsika technical support — we provide reset methods and troubleshooting guidance for the corresponding model.

Q: My projector is not on the list of 83 models above. Can I use the ET-LAL500?

A: The list covers verified models, but it is not exhaustive. Panasonic products of the same generation often share lamp modules. Send a photo of the projector nameplate and the original lamp label to Zorsika technical support, and we can help confirm compatibility.

Q: Is there an installation guide for the ET-LAL500?

A: Yes. The lamp door location and removal/installation steps are basically the same across these Panasonic models. Contact Zorsika sales to obtain illustrated or video guides for the corresponding model.

Q: How long is the lamp warranty?

A: The Zorsika PRO series projector lamp comes with a 180-day warranty. Normal use with non-human damage (such as lamp explosion or abnormal early brightness degradation) is covered by after-sales service; brightness degradation within the standard range is normal wear and is not covered by the warranty.

Three Points to Verify Before Purchasing

1. Verify the nameplate model: Open the projector's lamp door; the model on the lamp module label should match ET-LAL500 exactly. Some Panasonic models have suffix variations such as -V or +, but the lamp module is usually the same. If unsure, photographing the nameplate and sending it to Zorsika technical support for confirmation is the safer approach.
2. Confirm the lamp form: The same model comes in four forms — original packaged, original bare, replacement, and second-hand — and the differences are significant. Original bare means an original arc tube paired with a third-party lamp frame, usually offering the best overall value. When purchasing, be sure to specify clearly on the order which form you want to avoid disputes after delivery.
3. Verify physical specifications: The reflector size 50X50L and the arc gap must match the original lamp. If any item does not match, it may not fit or may fail to light up.

After Replacing the Lamp, Pay Attention to These Points

• Clean dust promptly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in ordinary office environments, every 3-6 months.
• Use eco mode: Where brightness is sufficient, prioritize eco mode to reduce the lamp's thermal load.
• Avoid frequent switching: Thermal cycling is one of the main sources of lamp wear. If not using the projector for a short time, use the blank/shutter function rather than repeatedly cutting power.
• Shut down properly: After shutting down, wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp timer in the menu; otherwise the projector will continue to alert based on the old timer.

Related Resources

• Zorsika Technical Support Center
• Projector brand and compatible model lookup
• Projector lamp / lens / air filter product library

Purchasing Inquiries

For solution consultation, bulk proposals, or the complete compatible model list for the Panasonic ET-LAL500, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article all come from the Zorsika product database. Data is continuously updated; please refer to actual quotation confirmation.