Sony LMP-C240 Projector Lamp Compatible Models: VPL-CW258 VPL-CX238 VPL-CW255 VPL-CX235 VPL-CX236

If the Sony projector in your meeting room or classroom suddenly dims, don't rush to call for repairs. First check whether the lamp is due for replacement: the LMP-C240 covers 8 Sony projector models. Read on for specifications and replacement tips.

Compatible Models: 8 Sony Projectors

The following are verified compatible Sony projector models for the LMP-C240, separated by commas:

VPL-CW258, VPL-CX238, VPL-CW255, VPL-CX235, VPL-CX236, VPL-CW256, VPL-CX239, VPL-CW259

Note: Projectors of the same generation often share the same lamp module. For models not listed, contact Zorsika technical support for confirmation.

Specifications at a Glance

The above specifications come from the Zorsika product database. Contact sales for a complete technical datasheet.

Frequently Asked Questions

Q: What should I do if the projector says the lamp is not recognized after replacement?

A: First check whether the lamp timer has been reset. The vast majority of such alerts are caused by an unreset timer. If the error persists after resetting, contact Zorsika technical support — we provide the reset procedure and troubleshooting guide for your specific model.

Q: How do I choose between original packaged, original bare, and aftermarket?

A: If you want stable brightness and long-term reliability, the Zorsika PRO series lamp is the first choice — every parameter is matched to the original factory specs, each unit is powered-on tested before shipping, performance is on par with the original, and it comes with a 180-day warranty. For routine business and education use and meeting rooms, the PRO series is the worry-free choice. Other replacement lamps cost less, but arc tube sourcing and quality control vary widely, with higher risk of brightness degradation and shortened lifespan — they are only recommended as temporary backup units.

Q: Why choose Zorsika PRO instead of the original factory lamp?

A: The core principle of the Zorsika PRO series is "original factory parameters, independent quality control": power, arc gap, and reflector size are benchmarked item by item against the original, but each unit undergoes an additional powered-on test before shipping, with a 180-day warranty. Compared to the original, it's more worry-free overall; compared to other replacement options, quality control is more consistent.

Q: Is there an installation tutorial for the LMP-C240?

A: Yes. The lamp door location and removal/installation steps are essentially the same across these Sony models. Contact Zorsika sales for illustrated or video tutorials for your specific model.

Q: How long is the lamp warranty?

A: Zorsika PRO series projector lamps come with a 180-day warranty. Normal use with non-human-caused damage (such as lamp explosion or abnormal early brightness degradation) is covered by after-sales service; brightness degradation within the standard range is normal wear and is not covered by warranty.

What the Zorsika PRO Series Offers You

For high-volume standard lamp modules like the LMP-C240, the Zorsika PRO series provides an alternative with the same specifications as the original — power, arc gap, and reflector size are benchmarked item by item against the original, each unit is powered-on tested before shipping, and it's ready to install without any structural modification.

• Spec Matching: Power, arc gap, and reflector size matched item by item to original factory parameters
• Unit-by-Unit Testing: Each unit powered-on tested before shipping, ensuring brightness and stability
• Warranty Commitment: 180-day lamp warranty; normal use with non-human-caused damage covered by after-sales service
• Stable Supply: Supports bulk purchasing and project supply

In short: if you want original factory quality with more peace of mind, the Zorsika PRO series projector lamp is made for exactly this scenario.

Note: Brightness, lifespan, and other performance aspects are significantly affected by projector condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. We recommend ordering 1-2 samples for powered-on testing before bulk purchasing.

Routine Maintenance to Make Your Lamp Last Longer

• Clean Dust Promptly: Dust buildup on air intakes and air filters directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in typical office environments, every 3-6 months.
• Use Eco Mode: This lamp supports dual power of 245W / 170W. Switching to eco mode for everyday presentations significantly reduces the lamp's thermal load.
• Avoid Frequent On/Off Cycling: Thermal cycling is a major source of lamp wear. If not in use for a short time, use the blank/shutter function instead of repeatedly powering off.
• Shut Down Properly: After powering off, always wait for the fan to stop before cutting power. Cutting power while hot causes sudden cooling of the lamp, a common cause of lamp explosion.
• Reset After Replacement: After installing a new lamp, be sure to reset the lamp timer in the menu; otherwise the projector will continue to alert based on the old timer.

Related Resources

• Zorsika Technical Support Center
• Projector Brand & Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Catalog

Purchase Inquiry

For Sony LMP-C240 solution consultation, bulk orders, or a complete compatible model list, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article come from the Zorsika product database. Data is continuously updated; please confirm with an actual inquiry.