Sony LMP-D200 Projector Lamp for VPL-DX10 VPL-DX15 VPL-DX11 OEM Replacement

No need to read the manual: the core specs of the Sony LMP-D200 projector lamp, its 3 compatible projector models, and the three things you should confirm before buying are all in this article.

Specifications at a Glance

The specifications above come from the Zorsika product database. Contact sales if you need the complete technical datasheet.

Where It Works: List of 3 Compatible Sony Models

The following are the verified compatible models for the LMP-D200 among Sony projectors, separated by commas:

VPL-DX10, VPL-DX15, VPL-DX11

Note: Projectors of the same generation often share the same lamp module. For models not on this list, contact Zorsika technical support to confirm compatibility.

What the Zorsika PRO Series Offers You

For high-volume standard lamp modules like the LMP-D200, the Zorsika PRO Series provides an alternative with the same specifications as the original, matching power, arc gap, and reflector size item by item against the original, with each unit lit and tested before leaving the factory. It is ready to install without any structural modification.

• Spec Matching: Power, arc gap, and reflector size matched item by item to original parameters
• Unit-by-Unit Testing: Each unit lit and tested before shipping, ensuring brightness and stability
• Warranty Commitment: 180-day lamp warranty; normal use with non-human damage qualifies for after-sales service
• Stable Supply: Supports bulk purchasing and project supply

In short: if you want original-quality performance with greater overall peace of mind, the Zorsika PRO Series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is significantly affected by the projector's condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. We recommend ordering 1-2 samples for lighting tests before bulk purchasing.

You Might Want to Ask

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO Series lamp is "original parameters, independent quality control": power, arc gap, and reflector size are matched item by item to the original, but with an extra unit-by-unit lighting test before shipping and a 180-day warranty. Compared to the original, it offers greater overall peace of mind; compared to other alternatives, it offers more consistent quality control.

Q: How do I choose between original packaged, original bare, compatible, and used?

A: If you want stable brightness and long-term reliability, the Zorsika PRO Series lamp is the first choice — matched item by item to original parameters, unit-by-unit lighting tested before shipping, performance on par with the original, greater overall peace of mind, and backed by a 180-day warranty. For routine business and education, conference room use, the PRO Series is also the more worry-free choice overall. Other replacement lamps may cost less, but arc tube sources and quality control vary widely, with higher risk of brightness degradation and shortened lifespan. They are only recommended for temporary backup projectors.

Q: What should I do if the projector says the lamp is not recognized after replacement?

A: First check whether the lamp timer has been reset. The vast majority of such messages are caused by an unreset timer. If the error persists after resetting, contact Zorsika technical support — we provide reset methods and troubleshooting guidance for the corresponding model.

Q: My projector isn't on the list of 3 models above. Can I use the LMP-D200?

A: The list covers verified models, but it doesn't represent all of them. Sony products of the same generation often share lamp modules. Send a photo of the projector nameplate and the original lamp label to Zorsika technical support, and we can help confirm compatibility.

Q: Is there an installation guide for the LMP-D200?

A: Yes. The lamp door location and removal/installation steps for these Sony models are basically the same. Contact Zorsika sales to obtain illustrated or video guides for the corresponding model.

Q: How long is the lamp warranty?

A: The Zorsika PRO Series projector lamp comes with a 180-day warranty. Normal use with non-human damage (such as lamp explosion or abnormal early brightness degradation) qualifies for after-sales service. Brightness degradation within the standard range is normal wear and is not covered by the warranty.

Before Ordering, Verify These Three Things

1. Verify the nameplate model: Open the projector's lamp door — the model on the lamp module label should exactly match LMP-D200. Some Sony models have suffix differences like -V or +, but the lamp module is usually compatible. If unsure, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp form: The same model comes in four forms: original packaged, original bare, compatible, and used — and the differences are significant. Original bare means an original arc tube paired with a third-party lamp frame, which usually offers the best overall value. When ordering, be sure to specify clearly on the order which form you want to avoid disputes after delivery.
3. Verify physical specifications: Reflector size 45X45L, socket E18.5, and arc gap must all match the original lamp. If any one of these doesn't match, it may not fit or may not light up.

After Replacing the Lamp, Pay Attention to These Points

• Clean dust promptly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in normal office environments, every 3-6 months.
• Use eco mode: This lamp supports dual power of 220W / 160W. Switching to eco mode for everyday presentation scenarios can significantly reduce the lamp's thermal load.
• Avoid frequent on/off cycling: Thermal cycling is one of the main causes of lamp wear. If not using the projector for a short time, use the blank/mute function rather than repeatedly cutting power.
• Shut down properly: After shutting down, wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp timer in the menu, otherwise the projector will continue to alert based on the old timer.

Related Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Catalog

Purchase Inquiry

For Sony LMP-D200 solution consultation, bulk orders, or the complete compatible model list, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article all come from the Zorsika product database. Data is continuously updated; please refer to actual inquiry confirmation.