Sony LMP-D214 Projector Lamp for VPL-DX270 VPL-DX240 VPL-DX220 VPL-DW240 VPL-DX271 VPL-DX241 and

When choosing a lamp for a Sony projector, match the model first before anything else. Here are the specs of the LMP-D214 and a quick reference to its 8 compatible projector models.

Lamp Module Specifications

The above parameters come from the Zorsika product database. For the complete technical specification sheet, please contact our sales team.

Where It Works: List of 8 Sony Models

Below are the verified Sony projector models compatible with the LMP-D214, separated by commas:

VPL-DX270, VPL-DX240, VPL-DX220, VPL-DW240, VPL-DX271, VPL-DX241, VPL-DX221, VPL-DW241

Note: Projectors of the same generation often share the same lamp module. For models not on this list, please contact Zorsika technical support for confirmation.

Same Specs, So Why Choose Zorsika PRO

For high-volume standard lamp modules like the LMP-D214, the Zorsika PRO series offers an alternative with the same specs as the original, matching power, arc gap, and reflector size item by item. Each unit is powered on and tested before leaving the factory, ready to install without any structural modification.

• Spec Matching: Power, arc gap, and reflector size matched item by item to original parameters
• Individual Testing: Each unit powered on and tested before shipment, ensuring brightness and stability
• Warranty Commitment: 180-day warranty on lamps; normal use with non-human damage qualifies for after-sales service
• Stable Supply: Supports bulk purchasing and project supply

In short: if you want original-quality performance with greater peace of mind, the Zorsika PRO series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is significantly affected by machine condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. We recommend ordering 1-2 samples for a power-on test before bulk purchasing.

You Might Want to Ask

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO series lamp is "original parameters, independent quality control": power, arc gap, and reflector size are matched item by item to the original, but with an extra individual power-on test before shipment and a 180-day warranty. Compared to the original, it offers greater peace of mind; compared to other alternatives, it offers more consistent quality control.

Q: How to choose between original packaged, original bare, and replacement?

A: If you want stable brightness and long-term reliability, the Zorsika PRO series lamp is the first choice — matched item by item to original parameters, individually power-on tested before shipment, performance on par with the original, greater peace of mind, and backed by a 180-day warranty. For routine business, education, and conference room use, the PRO series is also the more worry-free option. Other replacement lamps may cost less, but arc tube sources and quality control vary widely, with higher risk of brightness degradation and shortened lifespan. They are only recommended for temporary backup machines.

Q: What should I do if the machine says the lamp is not recognized after replacement?

A: First check whether the lamp timer has been reset. The vast majority of such alerts are caused by the timer not being cleared. If the error persists after resetting, contact Zorsika technical support — we provide the reset method and troubleshooting guidance for the corresponding model.

Q: My machine isn't on the list of 8 models above. Can I use the LMP-D214?

A: The list covers verified models, not all of them. Sony products of the same generation often share lamp modules. Take a photo of the machine's nameplate and the original lamp label and send it to Zorsika technical support to confirm compatibility.

Q: Is there an installation tutorial for the LMP-D214?

A: Yes. The lamp door location and removal/installation steps for these Sony models are basically the same. Contact Zorsika sales for illustrated or video tutorials for the corresponding model.

Q: How long is the lamp warranty?

A: The Zorsika PRO series projector lamp comes with a 180-day warranty. Normal use with non-human damage (such as lamp explosion or abnormal early light decay) qualifies for after-sales service; brightness degradation within the standard range is normal wear and is not covered by the warranty.

Purchasing Pitfalls: Three Key Checks

1. Check the nameplate model: Open the projector's lamp door — the model on the lamp module label should exactly match LMP-D214. Some Sony models have suffix variations like -V or +, but the lamp module is usually compatible. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp form: The same model comes in four forms — original packaged, original bare, replacement, and second-hand — with significant differences. Original bare means an original arc tube paired with an aftermarket frame, usually offering the best overall value. Always specify which form you want on the order to avoid disputes after delivery.
3. Check physical specs: Reflector size 50X50D, socket E19.4, and arc gap must all match the original lamp. Any mismatch may prevent installation or prevent the lamp from lighting up.

After Replacing the Lamp, Pay Attention to These Points

• Clean dust promptly: Dust buildup on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in normal office environments, every 3-6 months.
• Use eco mode: Use eco mode whenever brightness is sufficient to reduce the lamp's thermal load.
• Avoid frequent switching: Thermal cycling is a major source of lamp wear. If not using the projector for a short time, use the blanking function instead of repeatedly cutting power.
• Shut down properly: After shutting down, wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp timer in the menu, otherwise the machine will continue to alert based on the old timer.

Related Query Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Database

Purchasing Inquiry

For Sony LMP-D214 solution consultation, bulk solutions, or the complete compatible model list, please contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specification parameters, and compatible model data in this article all come from the Zorsika product database. Data is continuously updated; please refer to actual inquiry confirmation.