Sony LMP-F271 Projector Lamp Compatible Models: VPL-FH300 VPL-FW300 OEM Replacement

When replacing a Sony projector lamp, the most time-consuming part is often not the installation itself, but confirming whether the model matches. The LMP-F271 covers 2 Sony projector models. This article lays out the specifications, compatible models, and key verification points all at once.

Specifications at a Glance

The above parameters come from the Zorsika product database. For the complete technical specification sheet, please contact sales.

Compatible Models: 2 Sony Projectors

The following are verified compatible models for the LMP-F271 among Sony projectors, with model numbers separated by commas:

VPL-FH300, VPL-FW300

Note: Projectors of the same generation often share the same lamp module. For models not on this list, please contact Zorsika technical support for confirmation.

Before Ordering, Verify These Three Things

1. Check the nameplate model: Open the projector's lamp door, and the model on the lamp module label should exactly match LMP-F271. Some Sony models have suffix variations such as -V or +, but the lamp module is usually interchangeable. If unsure, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp type: The same model comes in four types: original packaged, original bare, compatible, and used. These four types differ considerably. Original bare means an original arc tube paired with an aftermarket frame, which typically offers the best overall value. When ordering, be sure to specify clearly on the order which type you need to avoid disputes after delivery.
3. Verify physical specifications: The reflector size 55X55L and arc gap must match the original lamp. If any one of these does not match, the lamp may not fit or may fail to light up.

What the Zorsika PRO Series Offers You

The LMP-F271 is a relatively high-volume model. The Zorsika PRO Series applies consistency control to the arc tube according to original factory parameters and adds an extra factory lighting test, providing greater assurance of brightness and stability.

• Specification matching: Power, arc gap, and reflector size are matched item by item to original factory parameters
• Individual testing: Each unit is lit and tested before leaving the factory, ensuring brightness and stability
• Warranty commitment: 180-day warranty on the lamp; normal use with non-human damage is covered by after-sales service
• Stable supply: Supports bulk purchasing and project supply

In one sentence: if you want original factory quality with greater overall peace of mind, the Zorsika PRO Series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is significantly affected by machine condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. We recommend obtaining 1-2 samples for lighting tests before bulk purchasing.

Routine Maintenance to Make Your Lamp Last Longer

• Clean dust promptly: Dust accumulation on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in typical office environments, every 3-6 months.
• Use eco mode: Use eco mode whenever brightness is sufficient to reduce the lamp's thermal load.
• Avoid frequent on/off cycling: Thermal cycling is one of the main sources of lamp wear. If not using the projector for a short time, use the blank/mute function rather than repeatedly cutting power.
• Shut down properly: After powering off, wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, which is a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp timer in the menu; otherwise, the projector will continue to alert based on the old timer.

Frequently Asked Questions

Q: My projector is not on the list of 2 models above. Can I use the LMP-F271?

A: The list covers verified models but does not represent all compatible models. Sony products of the same generation often share the same lamp module. Take a photo of the projector nameplate and the original lamp label and send them to Zorsika technical support, and we can help confirm compatibility.

Q: How do I choose between original packaged, original bare, and compatible?

A: If you want brightness stability and long-term reliability, the Zorsika PRO Series lamp is the top choice — matched item by item to original factory parameters, individually lit and tested before leaving the factory, with performance benchmarked to the original and greater overall peace of mind, backed by a 180-day warranty. For routine commercial/education and conference room use, the PRO Series is also the more worry-free choice overall. Other replacement lamps may cost less, but arc tube sourcing and quality control vary considerably, with higher risk of brightness degradation and shortened lifespan. They are only recommended for temporary backup projectors.

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO Series lamp is "original factory parameters, independent quality control": power, arc gap, and reflector size are benchmarked item by item to the original, but an extra individual lighting test is added before leaving the factory, with a 180-day warranty. Compared to the original, it offers greater overall peace of mind; compared to other replacement options, it offers more consistent quality control.

Q: What should I do if the projector says the lamp is not recognized after replacement?

A: First confirm whether the lamp timer has been reset. The vast majority of such alerts are caused by the timer not being cleared. If the error persists after resetting, contact Zorsika technical support — we provide reset methods and troubleshooting guidance for the corresponding model.

Q: Is there an installation tutorial for the LMP-F271?

A: Yes. The lamp door location and installation steps for these Sony models are basically the same. Contact Zorsika sales to obtain illustrated or video tutorials for the corresponding model.

Q: How long is the lamp warranty?

A: The Zorsika PRO Series projector lamp comes with a 180-day warranty. Normal use with non-human damage (such as lamp explosion or abnormal early brightness degradation) is covered by after-sales service. Brightness degradation within the standard range is normal wear and is not covered by the warranty.

Related Search Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Search
• Projector Lamp / Lens / Air Filter Product Library

Purchase Inquiries

For solution consultation, bulk purchasing, or a complete compatible model list for the Sony LMP-F271, please contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article all come from the Zorsika product database. Data is continuously updated; please refer to actual inquiry confirmation.