Canon LV-LP35 Projector Lamp Compatible with LV-8225 LV-7391 LV-7390 LV-7296 LV-7295 LV-7290 OEM

Canon LV-LP35 Compatible Projector Models (6 Models)

The following are verified compatible projector models for LV-LP35 in Canon projectors, separated by commas:

LV-8225, LV-7391, LV-7390, LV-7296, LV-7295, LV-7290

Note: Projectors of the same generation often share the same lamp module. For models not on the list, contact Zorsika technical support for confirmation.

Lamp Specifications

The above parameters are sourced from Zorsika's product database. Contact your sales representative for complete technical specifications.

Frequently Asked Questions

Q: What should I do if the projector shows "lamp not recognized" after replacement?

A: First, confirm whether the lamp timer has been reset. Most prompts are caused by uncleared timers. If the error persists after reset, contact Zorsika technical support—we provide reset methods and troubleshooting guides for corresponding models.

Q: Which option to choose: original packaging, bare lamp, or alternative?

A: For stable brightness and long-term reliability, Zorsika PRO series lamps are the top choice—each parameter matched to original specs, 100% burn-in tested before shipping, original-equivalent performance with better overall value, backed by 180-day warranty; for regular commercial, educational, and meeting room use, PRO series offers the best overall value too. Other alternative lamps are cheaper but have greater variability in arc tube sources and quality control, with higher risks of brightness decay and shorter lifespan—recommended only for temporary backup units.

Q: Why choose Zorsika PRO over OEM?

A: The core logic of Zorsika PRO series is "original specs, independent QC": power, arc gap, and reflector size matched item by item to OEM standards, plus 100% burn-in testing before shipping, with 180-day warranty. Compared to OEM, better overall value; compared to other alternatives, more stable quality control.

Q: Is there an installation tutorial for LV-LP35?

A: Yes. The lamp door positions and disassembly procedures are essentially consistent across these Canon models. Contact Zorsika sales to get illustrated or video tutorials for corresponding models.

Q: How long is the lamp warranty?

A: Zorsika PRO series projector lamps come with 180-day warranty. Normal use and non-human damage (such as lamp explosion, early abnormal light decay) are covered under warranty. Brightness decay within standard range is considered normal wear and tear, not covered by warranty.

Same Specs, Why Recommend Zorsika PRO

For high-volume standard lamp modules like the LV-LP35, the Zorsika PRO series provides OEM-spec replacements. Power, arc gap, and reflector size are matched item by item to the original. Each unit undergoes lighting test before shipment—just install and use, no structural modifications needed.

• Spec Matching: Power, arc gap, and reflector size matched item by item to OEM specifications
• Unit Testing: Each lamp is lighting-tested before shipment for guaranteed brightness and stability
• Warranty: 180-day warranty on lamps; normal use with non-human damage covered by after-sales service
• Stable Supply: Supports bulk procurement and project-based orders

Bottom line: If you want OEM-quality performance with greater overall peace of mind, the Zorsika PRO projector lamp is built for exactly this scenario.

Note: Brightness, lifespan, and other performance metrics vary significantly based on machine condition, usage environment, and thermal management. Zorsika does not make uniform numerical commitments. We recommend ordering 1-2 sample units for lighting tests before placing bulk orders.

Daily Maintenance to Extend Lamp Life

• Clean Dust Regularly: Dust buildup on the air intake and air filter directly raises lamp operating temperature—clean every 1-2 months in dusty environments, or every 3-6 months in typical office settings.
• Use Eco Mode: This lamp supports dual power modes at 210W / 140W. Switching to eco mode in standard presentation scenarios significantly reduces lamp thermal load.
• Avoid Frequent On/Off Cycles: Thermal cycling is a major cause of lamp wear. If the projector won't be used for a short period, use the blank function instead of repeatedly powering off.
• Proper Shutdown: Always wait for the fan to stop before disconnecting power after shutdown. Hot-state disconnection causes rapid lamp cooling and is a common cause of lamp failure.
• Reset After Replacement: After installing a new lamp, be sure to reset the lamp timer in the menu—otherwise the machine will continue to alert based on the old timer.

Related Search Links

• Zorsika Technical Support Center
• Projector Brands & Compatible Models
• Projector Lamp / Lens / Air Filter Product Library

Procurement Consultation

For inquiries about Canon LV-LP35 solutions, bulk orders, or complete model compatibility lists, contact us through:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

Lamp module models, specifications, and compatible projector models in this article are sourced from the Zorsika product database. Data is continuously updated; confirm with actual inquiry for accuracy.