Barco R9801015 Projector Lamp Compatible Models: CLM HD6 OEM Replacement

When choosing a lamp for a Barco projector, match the model first before anything else. The specifications of the R9801015 and a quick reference for 1 compatible projector model are as follows.

Specifications at a Glance

The above parameters come from the Zorsika product database. For a complete technical specification sheet, please contact our sales team.

Where It Works: List of 1 Compatible Barco Model

The following are verified compatible models of R9801015 among Barco projectors, with model names separated by commas:

CLM HD6

Note: Projectors of the same generation often share the same lamp module. For models not listed, please contact Zorsika technical support for confirmation.

Same Specifications — Why We Recommend Zorsika PRO

The Zorsika PRO series offers an OEM-spec replacement lamp module for the R9801015, with key parameters matched item by item against the original. It supports project supply and bulk procurement with more controllable lead times.

• Specification Matching: Power, arc gap, and reflector size matched item by item against original parameters
• Individual Testing: Each unit is lit and tested before leaving the factory, ensuring brightness and stability
• Warranty Commitment: 180-day warranty on the lamp; after-sales service available for normal use damage not caused by human factors
• Stable Supply: Supports bulk procurement and project supply

In one sentence: If you want original-quality performance with greater peace of mind overall, the Zorsika PRO series projector lamp is made for exactly this scenario.

Note: Performance such as brightness and lifespan is significantly affected by machine condition, usage environment, and cooling conditions. Zorsika does not make uniform numerical promises. We recommend ordering 1-2 samples for a lighting test before bulk procurement.

Frequently Asked Questions

Q: Why choose Zorsika PRO instead of the original?

A: The core logic of the Zorsika PRO series lamp is "original parameters, independent quality control": power, arc gap, and reflector size are matched item by item against the original, but an additional individual lighting test is performed before leaving the factory, with a 180-day warranty. Compared to the original, it offers greater peace of mind overall; compared to other alternatives, it offers more consistent quality control.

Q: How do I choose between original packaged, original bare, and aftermarket?

A: If you prioritize brightness stability and long-term reliability, the Zorsika PRO series lamp is the first choice — matched item by item against original parameters, individually lit and tested before leaving the factory, with performance comparable to the original and greater peace of mind overall, backed by a 180-day warranty. For routine business and education use and conference rooms, the PRO series is also the more worry-free choice overall. Although other replacement lamps cost less, the arc tube sources and quality control vary significantly, with higher risks of brightness degradation and shortened lifespan. They are only recommended for temporary backup machines.

Q: What should I do if the machine says the lamp is not recognized after replacement?

A: First check whether the lamp timer has been reset. The vast majority of such alerts are caused by the timer not being cleared. If the error persists after resetting, contact Zorsika technical support — we provide the reset method and troubleshooting guidance for the corresponding model.

Q: My machine is not in the list of 1 models above — can I use the R9801015?

A: The list covers verified models, not all of them. Barco products of the same generation often share lamp modules. Take a photo of the machine's nameplate and the original lamp label and send it to Zorsika technical support, and we can help confirm compatibility.

Q: Is there an installation guide for the R9801015?

A: Yes. The lamp door location and removal/installation steps for these Barco models are basically the same. Contact Zorsika sales for illustrated or video guides for the corresponding model.

Q: How long is the lamp warranty?

A: The Zorsika PRO series projector lamp comes with a 180-day warranty. After-sales service is available for normal use damage not caused by human factors (such as lamp explosion or abnormal early light decay). Brightness degradation within the standard range is normal wear and is not covered by the warranty.

Three Points to Verify Before Purchasing

1. Verify the nameplate model: Open the projector's lamp door — the model on the lamp module label should exactly match R9801015. Some Barco models have suffix variations such as -V or +, but the lamp module is usually compatible. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm the lamp type: The same model comes in four types — original packaged, original bare, aftermarket, and used — with significant differences among them. Original bare means an original arc tube paired with a third-party lamp frame, typically offering the best overall value. When ordering, be sure to specify clearly which type you want to avoid disputes after delivery.
3. Verify physical specifications: Reflector size 00X56D, socket E20.9, and arc gap must all match the original lamp. Any mismatch may result in failure to fit or failure to light up.

After Replacing the Lamp, Pay Attention to These Points

• Clean dust promptly: Dust accumulation on the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean every 1-2 months; in normal office environments, every 3-6 months.
• Use eco mode: Use eco mode whenever brightness is sufficient to reduce the lamp's thermal load.
• Avoid frequent switching: Thermal cycling is one of the main sources of lamp wear. If not in use for a short period, use the shutter function rather than repeatedly cutting power.
• Shut down properly: After shutting down, wait for the fan to stop before cutting power. Cutting power while hot causes the lamp to cool abruptly, a common cause of lamp explosion.
• Reset after replacement: After installing a new lamp, be sure to reset the lamp timer in the menu, otherwise the machine will continue to alert based on the old timer.

Related Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Database

Purchase Inquiry

For solution consultation, bulk plans, or a complete compatible model list for the Barco R9801015, please contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article all come from the Zorsika product database. Data is continuously updated and subject to confirmation upon actual inquiry.