Zorsika LC01C Projector Lens Compatible Models: Christie DWU760-iS DWU860-iS DWU960-iS 4K860-iS OEM

Picture too small or installation distance not enough? Changing a lens solves it. LC01C fits 4 Christie models — see the list below.

LC01C Compatible Projector Models (4 total, with brightness/resolution/zoom ratio)

The following are verified compatible models for LC01C (Christie projectors), with brightness, resolution, and zoom ratio listed for each:

Note: Brightness, resolution, and zoom ratio are taken from the Zorsika product database (refer to the model nameplate/manual for accuracy); lens compatibility is based on the chassis interface and optical structure. For models not listed, contact Zorsika technical support for confirmation.

Lens Specifications at a Glance

The above specifications come from the Zorsika product database. For the complete technical datasheet, contact sales to request it.

You Might Want to Ask

Q: What if the lens doesn't match the picture size?

A: First confirm the model's lens interface and optical axis position, then choose a lens with the corresponding throw ratio based on your actual installation distance. If unsure, send your installation distance and screen size to Zorsika technical support and we'll help you choose.

Q: My machine isn't in the 4-model list above — can I use LC01C?

A: The list covers verified models, not all of them. Engineering projectors of the same brand and generation often share the same lens interface. It's safer to photograph the chassis nameplate and original lens and send them to Zorsika technical support for confirmation.

Q: Can the lens replace the original one?

A: The lens is the core of the projector's optical path and directly determines clarity and color. Zorsika lenses (model shown in the specification table above) are benchmarked item by item against original optical parameters (focal length, throw ratio, lens group), with matching lens coating processes — sharp imaging with no blurry edges, ready to use once installed. Ordinary replacement lenses often use standard glass elements with insufficient coating layers, making brightness loss and color shift obvious at a glance. For engineering and exhibition scenarios, Zorsika is recommended.

Q: Why choose Zorsika instead of the original manufacturer?

A: Zorsika lenses are produced according to original optical drawings, with the lens group, coating, and throw ratio benchmarked item by item, and each unit undergoes resolution testing before leaving the factory. Compared to the original, lead times are shorter and overall value is better; compared to other replacement lenses, optical quality is backed by data.

Q: How long is the lens warranty?

A: All Zorsika projector lenses come with a 12-month warranty. Under normal use and non-human-caused damage (such as impact, water damage, or unauthorized disassembly), you can contact after-sales service directly. The warranty period is based on the date on the shipment document.

What Zorsika Lenses Offer You

For engineering lenses like LC01C, Zorsika benchmarks item by item against original optical parameters (focal length, throw ratio, lens group), with matching lens coating processes — sharp imaging with no blurry edges, ready to use once installed.

Zorsika's same-spec replacement model fits 4 models including Christie DWU760-iS, DWU860-iS, DWU960-iS, and 4K860-iS; enter LC01C in the Zorsika official website query system to see the complete model compatibility list.

• Optical Benchmarking: Focal length, throw ratio, and lens group matched to original parameters
• Resolution Testing: Each unit tested before shipment, with MTF data available
• Coating Process: Lens coatings at the same level as the original, reducing light loss
• Stable Supply: Supports bulk purchasing and project supply

In short: the lens is the optical core — don't gamble on picture quality to save a few bucks. Zorsika projector lenses are produced according to original drawings and offer better overall value.

Note: Actual imaging performance is affected by the chassis condition and installation environment. Before bulk purchasing, we recommend getting 1 unit for testing first.

What to Watch Out for When Changing a Lens

• Power off before changing the lens: Be sure to shut down and wait for the cooling fan to stop before removing or installing the lens, to avoid damaging the interface while powered.
• Don't touch the glass: Fingerprints and oil directly affect image quality. Hold the lens by the barrel, not the glass. Use an air blower to gently remove dust — don't dry-wipe with a cloth.
• Focus before tightening: After installing properly, test the focus first, then tighten the fixing screws, to avoid picture drift from loosening over time.
• Keep the interface clean: Dust buildup on the mount and contacts causes poor contact — cleaning it while changing the lens is a safer bet.

Related Query Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Query
• Projector Lamp / Lens / Air Filter Product Library

Purchasing Inquiry

For Zorsika LC01C solution consultation, project proposals, or the complete model compatibility list, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lens model and compatible model data in this article come from the Zorsika product database. Data is continuously updated; please refer to actual quotation confirmation.