Christie 003-102385-01 Projector Lamp for Mirage DS+14K-M, Roadster HD14K-M

Lamp Module Specifications

The above parameters come from the Zorsika product database. For complete technical specifications, please contact your sales representative.

Christie 003-102385-01 Compatible Projector Models (6 models total)

Below are the verified compatible projector models for 003-102385-01 in Christie projectors, models separated by commas:

Mirage DS+14K-M, Roadster HD14K-M, Mirage WU14K-M, Roadster S+14K-M, Roadster WU14K-M, Mirage HD14K-M

Note: Projectors of the same generation often share the same lamp module. For models not listed, please contact Zorsika technical support for confirmation.

Three Points to Verify Before Purchasing

1. Verify the nameplate model: Open the projector lamp door. The model on the lamp module label should exactly match 003-102385-01. Some Christie models may have suffix differences such as -V or +, but lamp modules are usually interchangeable. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm lamp form: The same model comes in four forms: original sealed, original bare, replacement, and used. These four forms vary significantly. Original bare refers to an original arc tube with a third-party lamp bracket, offering the best overall value. Be sure to clearly specify which form you need on the purchase order to avoid disputes upon receipt.
3. Verify physical specifications: Reflector size 56X56D and arc gap must match the original lamp. Any mismatch may result in inability to install or light up.

What Zorsika PRO Series Offers

For high-volume standard lamp modules like the 003-102385-01, the Zorsika PRO series provides original-equivalent replacement solutions with matching power, arc gap, and reflector size. Every unit undergoes individual lighting tests before shipment and is ready for immediate installation without structural modifications.

• Specifications matched: Power, arc gap, and reflector size matched to original specifications item by item
• Individual testing: Every unit undergoes individual lighting test before shipment for assured brightness and stability
• Warranty commitment: 180-day warranty on lamps; after-sales service available for normal use non-human damage
• Stable supply: Supports bulk procurement and project fulfillment

Bottom line: If you want original-equivalent quality with greater peace of mind, the Zorsika PRO series projector lamp is designed for exactly this scenario.

Note: Brightness, lifespan, and other performance characteristics are greatly affected by machine condition, usage environment, and thermal management. Zorsika does not make unified numerical commitments. It is recommended to obtain 1-2 sample units for lighting tests before bulk procurement.

Daily Maintenance: Extend Your Lamp Life

• Clean Dust Regularly: Dust buildup on the air intake and filter directly raises lamp operating temperature. In dusty environments, clean every 1-2 months; in standard office settings, every 3-6 months.
• Use Eco Mode: When brightness is sufficient, prioritize eco mode to reduce lamp thermal load.
• Avoid Frequent Switching: Thermal cycling is a major cause of lamp wear. For short periods of non-use, use the blank/shutter function instead of repeatedly turning the power on and off.
• Proper Shutdown: After turning off, wait for the fan to stop completely before cutting power. Powering down while still hot causes rapid lamp cooling, a common cause of lamp failure.
• Reset After Replacement: After installing a new lamp, be sure to reset the lamp timer in the menu; otherwise the projector will continue alerting based on the old timer.

Frequently Asked Questions

Q: My machine isn't on the list of 6 models above. Can I use 003-102385-01?

A: The list contains verified models but isn't exhaustive. Christie products from the same generation often share lamp modules. Send photos of the machine nameplate and original lamp label to Zorsika technical support to confirm compatibility.

Q: How do I choose between OEM packaged, OEM bare, or compatible lamps?

A: For brightness stability and long-term reliability, the Zorsika PRO Series is the top choice—each specification is matched to OEM standards, and every unit undergoes individual lighting tests before shipment. Performance is on par with OEM while offering better overall convenience, plus 180-day warranty. For general business, education, and conference room use, PRO Series also delivers better overall value. Other compatible lamps cost less but carry higher risks of brightness decay and shorter lifespan due to inconsistent lamp core sources and quality control, making them suitable only for temporary backup use.

Q: Why choose Zorsika PRO over OEM?

A: The core principle of Zorsika PRO Series is "OEM specifications with independent quality control": wattage, arc gap, and reflector size are matched to OEM standards item by item, with the addition of individual lighting tests before shipment and 180-day warranty. Compared to OEM, it's more convenient overall; compared to other compatible options, it offers more stable quality control.

Q: What if the projector shows "lamp not recognized" after replacement?

A: First verify whether the lamp timer was reset—this accounts for the vast majority of such alerts. If the error persists after reset, contact Zorsika technical support; we provide model-specific reset instructions and troubleshooting guidance.

Q: Is there an installation guide for 003-102385-01?

A: Yes. These Christie models have largely consistent lamp door locations and removal procedures. Contact Zorsika sales for model-specific illustrated or video tutorials.

Q: What's the warranty period for the lamp?

A: Zorsika PRO Series projector lamps come with 180-day warranty. Normal use and non-human damage (such as lamp explosion, abnormal early brightness decay) are covered by after-sales service. Brightness reduction within standard range is considered normal wear and isn't covered by warranty.

Quick Reference Links

• Zorsika Technical Support Center
• Projector Brands & Compatible Models Lookup
• Projector Lamp / Lens / Air Filter Product Catalog

Purchase Inquiry

For Christie 003-102385-01 consultation, bulk pricing, or complete compatible model list, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

Lamp module models, specifications, and compatible model data in this article are sourced from Zorsika's product database, which is continuously updated. Please confirm with actual inquiry for accuracy.