Christie 003-120181-01 Projector Lamp Compatible with DS+305W DS+26 DS+300 DS+305 OEM Replacement

Specifications Overview

All specifications are sourced from the Zorsika product database. For complete technical specifications, please contact our sales team.

Christie 003-120181-01 Compatible Projector Models (4 models in total)

Below are the verified compatible projector models for 003-120181-01 within Christie's lineup, with model numbers separated by commas:

DS+305W, DS+26, DS+300, DS+305

Note: Projectors from the same generation often share the same lamp module. For models not listed, please contact Zorsika technical support for confirmation.

Frequently Asked Questions

Q: Why choose Zorsika PRO over OEM?

A: The core principle of Zorsika PRO lamp module series is "OEM specifications, self quality control": power, arc gap, and reflector size are matched item by item to OEM standards, but with an additional per-unit illumination test before shipping, plus 180-day warranty. Compared to OEM, it's more worry-free overall; compared to other alternatives, quality control is more stable.

Q: How to choose between original packaged, bare lamp, or compatible?

A: If you prioritize stable brightness and long-term reliability, Zorsika PRO lamp module series is the top choice—matched to OEM specs item by item, with per-unit illumination testing before shipping, performance on par with OEM, more worry-free overall, and 180-day warranty; for regular commercial, education, and conference room use, PRO series is also the more worry-free choice overall. Other compatible lamp modules have lower cost, but lamp core sources and quality control vary significantly, with higher risk of brightness decay and shortened lifespan—only recommended for temporary backup units.

Q: What to do if the machine shows "lamp not recognized" after replacement?

A: First confirm whether lamp hour reset was performed—most prompts are caused by the timer not being reset. If error persists after reset, contact Zorsika technical support; we provide reset methods and troubleshooting guides for the corresponding model.

Q: My machine is not on the 4-model list above. Can I use 003-120181-01?

A: The list represents verified models, not an exhaustive one. Christie products from the same generation often share lamp modules. Take a photo of the machine's nameplate and original lamp label and send it to Zorsika technical support to confirm compatibility.

Q: Is there an installation tutorial for 003-120181-01?

A: Yes. The lamp door positions and removal/installation steps are essentially consistent across these Christie models. Contact Zorsika sales to get illustrated or video tutorials for the corresponding model.

Q: What is the warranty period for lamp modules?

A: Zorsika PRO projector lamp modules come with 180-day warranty; normal use and non-human damage (such as lamp explosion, early abnormal light decay) are covered by after-sales service; brightness decay within standard range is considered normal usage wear and tear, not covered by warranty.

Three Points to Verify Before Purchasing

1. Verify nameplate model: Open the projector lamp door; the model on the lamp module label should match 003-120181-01 exactly. Some Christie models may have suffix differences like -V or +, but lamp modules are usually interchangeable—when in doubt, send a photo of the nameplate to Zorsika technical support for confirmation.
2. Confirm lamp form: The same model comes in four forms: original packaged, bare lamp, compatible, and used. These four forms vary significantly. Bare lamp is OEM lamp core with third-party lamp bracket, generally offering the best value; when ordering, be sure to specify which form you want on the purchase order to avoid disputes upon receipt.
3. Verify physical specifications: Reflector size 45X45D, socket E19, and arc gap must match the original lamp; any mismatch may result in failure to install or light up.

After Lamp Replacement, Pay Attention to These Points

• Clean dust promptly: Dust accumulation on air intake and air filter directly raises lamp operating temperature—recommend cleaning once every 1-2 months in dusty environments, and once every 3-6 months in normal office environments.
• Use eco mode properly: This lamp module supports dual power modes at 220W / 170W; switching to eco mode for regular presentation scenarios significantly reduces lamp thermal load.
• Avoid frequent switching: Thermal cycling is one of the main causes of lamp degradation; when not using for a short period, use the shutter function instead of repeatedly turning power on/off.
• Shut down correctly: After powering off, must wait until fan stops completely before cutting power; hot-state power cut causes lamp to cool abruptly, a common cause of lamp explosion.
• Reset after replacement: After installing new lamp, must perform lamp hour reset in the menu; otherwise machine will continue to alarm based on old timer count.

Related Search Links

• Zorsika Technical Support Center
• Projector Brands & Compatible Model Search
• Projector Lamp / Lens / Air Filter Product Library

Procurement Inquiry

For Christie 003-120181-01 solution consultation, bulk orders, or complete model compatibility list, contact us through:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

Lamp module model, specifications, and compatible model data in this article are sourced from Zorsika product database; data is continuously updated and subject to confirmation upon actual inquiry.