Sanyo POA-LMP142 Lamp for 8 Sanyo Projectors PLC-WK2500 PLC-XD2200 PLC-XD2600 PLC-XE34 PLC-XK2200

Sanyo POA-LMP142 Compatible Projector Models (8 Models)

The following are the verified compatible projector models for POA-LMP142 in Sanyo projectors, with model numbers separated by commas:

PLC-WK2500，PLC-XD2200，PLC-XD2600，PLC-XE34，PLC-XK2200，PLC-XK2600，PLC-XK3010，PLC-XR2600C

Note: Projectors of the same generation often share the same lamp module. For models not on the list, please contact Zorsika technical support for confirmation.

Lamp Module Specifications

The above parameters are sourced from Zorsika's product database. For complete technical specifications, please contact your sales representative.

Frequently Asked Questions

Q: What should I do if the projector shows "lamp not recognized" after replacement?

A: First, verify whether the lamp timer has been reset. Most error messages are caused by an uncleared timer. If the error persists after resetting, contact Zorsika technical support—we provide reset methods and troubleshooting guides for the corresponding projector models.

Q: How do I choose between original packaging, bare lamp, or compatible lamp?

A: If you prioritize stable brightness and long-term reliability, the Zorsika PRO series projector lamp is the best choice—each parameter is matched to the original factory specifications, with every unit tested by lighting before shipment. Performance is on par with the original factory, and it's more cost-effective overall, backed by a 180-day warranty. For regular commercial, educational, and conference room use, the PRO series is also the smarter choice for overall savings. Other compatible lamps may cost less, but the lamp core sources and quality control vary significantly, resulting in higher risks of brightness decay and shorter lifespan—they are only recommended for temporary backup units.

Q: Why choose Zorsika PRO over OEM?

A: The core philosophy of Zorsika PRO series projector lamps is "Original Factory Parameters, Independent Quality Control": power, arc gap, and reflector size are matched item by item to the original factory. However, we add an additional step of testing every single unit by lighting before shipment, with a 180-day warranty. Compared to OEM, it's more worry-free; compared to other compatible solutions, quality control is more stable.

Q: Is there an installation tutorial for POA-LMP142?

A: Yes. The lamp door positions and disassembly/reassembly steps are essentially the same for these Sanyo models. Contact Zorsika sales to get the illustrated or video tutorials for the corresponding projector models.

Q: What is the warranty period for the projector lamp?

A: Zorsika PRO series projector lamps come with a 180-day warranty. Normal use and non-human damage (such as lamp explosion, early abnormal light decay) are covered by after-sales service. Brightness decay within the standard range is considered normal usage wear and tear and is not covered by the warranty.

Why Choose Zorsika PRO Series

POA-LMP142 is a high-volume model. Zorsika PRO Series performs arc tube consistency control according to original manufacturer parameters, with an additional factory burn-in test, ensuring better brightness and stability.

• Spec Matching: Power, arc gap, and reflector size are matched item by item according to original manufacturer parameters
• Individual Testing: Each unit undergoes burn-in testing before shipment, ensuring brightness and stability
• Warranty Commitment: 180-day lamp warranty, after-sales service available for normal use non-human damage
• Stable Supply: Supports bulk procurement and project-based supply

Bottom line: For those wanting OEM quality with comprehensive peace of mind, Zorsika PRO Series projector lamps are designed for exactly this scenario.

Note: Brightness, lifespan and other performance are greatly affected by machine condition, usage environment and heat dissipation. Zorsika does not make unified numerical commitments. It is recommended to test 1-2 samples before bulk procurement.

Daily Maintenance to Extend Lamp Life

• Clean Dust Regularly: Dust accumulation in the air intake and air filter will directly increase lamp working temperature. Clean every 1-2 months in dusty environments, every 3-6 months in normal office environments.
• Use Eco Mode: This lamp supports 210W/140W dual power. Switching to eco mode in normal presentation scenarios can significantly reduce lamp thermal load.
• Avoid Frequent Switching: Thermal cycling is one of the main sources of lamp wear. If not using for a short period, use the遮蔽 function instead of repeatedly powering on and off.
• Proper Shutdown: Must wait for fan to stop before cutting power after shutdown. Thermal shock from cutting power while lamp is hot is a common cause of lamp failure.
• Reset After Replacement: Must reset lamp timer in menu after installing new lamp, otherwise machine will continuously alarm based on old timer.

Related Links

• Zorsika Technical Support Center
• Projector Brands & Compatible Model Search
• Projector Lamp / Lens / Air Filter Product Library

Procurement Consultation

For Sanyo POA-LMP142 solution consultation, bulk pricing or complete compatible projector model list, please contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

Lamp module model, specifications, and compatible projector data in this article are sourced from Zorsika product database. Data is continuously updated. Please confirm with actual inquiry.