Infocus SP-LAMP-070 Projector Lamp Compatible with IN122 IN124 IN126 IN2124 IN2126 OEM Replacement

Lamp Module Specifications

The above parameters are from Zorsika's product database. For the complete technical specifications, please contact your sales representative.

Where It Works: 5 Infocus Model Compatibility List

The following are verified compatible models of SP-LAMP-070 in Infocus projectors, separated by commas:

IN122，IN124，IN126，IN2124，IN2126

Note: Projectors of the same generation often share the same lamp module. For models outside the list, please contact Zorsika technical support for confirmation.

Procurement Pitfalls: Three Key Verification Points

1. Verify the nameplate model: Open the projector lamp door, and the model on the lamp module label should exactly match SP-LAMP-070. Some Infocus models may have suffix variations like -V or +, but the lamp modules are usually interchangeable. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm lamp type: The same model comes in four types: original packaging, bare lamp, replacement, and second-hand. These four types vary significantly. Bare lamp is an original arc tube with an aftermarket housing, offering the best value overall. Make sure to clearly state which type you need on your order to avoid disputes upon delivery.
3. Verify physical specifications: Reflector size 00X51D, socket E20.8, and arc gap must match the original lamp. Any mismatch may result in installation failure or the lamp not igniting.

Same Specifications, Why Choose Zorsika PRO

SP-LAMP-070 is a high-volume model. Zorsika PRO series performs consistency control on the arc tube according to original factory parameters, with an additional factory lighting test for better brightness and stability.

• Spec matching: Power, arc gap, and reflector size match the original factory parameters item by item
• Individual testing: Each lamp is tested before shipment for assured brightness and stability
• Warranty commitment: 180-day warranty on lamps; after-sales service for normal use damage not caused by humans
• Stable supply: Supports bulk procurement and project orders

Bottom line: Zorsika PRO series projector lamps are designed for those who want original-equivalent quality with greater peace of mind.

Note: Brightness, lifespan, and other performance characteristics are greatly affected by machine condition, usage environment, and thermal management. Zorsika does not make unified numerical commitments. It is recommended to test 1-2 sample lamps before bulk procurement.

Daily Maintenance to Extend Lamp Life

• Clean Dust Promptly: Dust buildup on the air intake and filter directly raises the lamp's operating temperature. In dusty environments, clean once every 1-2 months; in normal office environments, clean once every 3-6 months.
• Use Eco Mode Properly: Prioritize eco mode when the brightness level is sufficient, as it reduces the lamp's thermal load.
• Avoid Frequent Switching: Thermal cycling is one of the main causes of lamp degradation. If not using for a short period, use the shutter/mute function instead of repeatedly turning the power off and on.
• Proper Shutdown: After turning off, wait until the fan stops before cutting power. Shutting down while still hot causes the lamp to cool abruptly, which is a common cause of lamp failure.
• Reset After Replacement: After installing a new lamp, be sure to reset the lamp timer in the menu; otherwise the machine will continue alarming based on the old timer.

Frequently Asked Questions

Q: My model is not on the 5-model list above. Can I still use SP-LAMP-070?

A: The list represents verified models, not an exhaustive inventory. InFocus products from the same generation often share compatible lamp modules. Take a photo of the unit's nameplate and the original lamp label and send them to Zorsika technical support — we can help confirm compatibility.

Q: Original packaging, bare lamp, or third-party — which should I choose?

A: For brightness stability and long-term reliability, the Zorsika PRO series lamp is the top choice — each specification is matched to OEM parameters, and every unit undergoes individual点亮 testing before shipment. Performance is on par with the original, and it's more worry-free overall with a 180-day warranty. For general business, education, or meeting room use, the PRO series also delivers the best overall value. Other replacement lamps, while cheaper, have greater variability in lamp core sourcing and quality control, carrying higher risks of brightness decay and shortened lifespan — these are only recommended for temporary backup units.

Q: Why choose Zorsika PRO over OEM?

A: The core principle of the Zorsika PRO series is "OEM specifications, self-controlled quality": power, arc gap, and reflector size are matched item by item to the original. However, we add an extra step — individual lamp testing before shipment — with a 180-day warranty. Compared to OEM, it's more worry-free overall; compared to other replacement options, quality control is more consistent.

Q: After replacing the lamp, the machine shows "lamp not recognized." What should I do?

A: First, confirm whether the lamp timer was reset. Most such alerts are caused by the unreset timer. If the error persists after resetting, contact Zorsika technical support — we provide reset instructions and troubleshooting guides for the specific model.

Q: Is there an installation tutorial for SP-LAMP-070?

A: Yes. The lamp door positions and disassembly/reassembly steps are essentially consistent across these InFocus models. Contact Zorsika sales to receive illustrated or video tutorials for your specific model.

Q: What is the warranty period for the lamp?

A: Zorsika PRO series projector lamps come with a 180-day warranty. Normal use and non-human damage (such as lamp failure or early abnormal light decay) are covered under after-sales service. Brightness decay within the standard range is considered normal usage wear and is not covered by the warranty.

Related Query Links

• Zorsika Technical Support Center
• Projector Brands and Compatible Model Search
• Projector Lamp / Lens / Air Filter Product Library

Purchase Inquiry

For inquiries about Infocus SP-LAMP-070 solutions, bulk pricing, or a complete compatible model list, reach us through:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

Lamp module models, specifications, and compatible model data in this article are sourced from the Zorsika product database. Data is continuously updated and subject to confirmation upon actual inquiry.