Infocus SP-LAMP-084 Compatible Projector Models (2 Models)
The following are verified compatible projector models for SP-LAMP-084 in Infocus projectors, models separated by commas:
IN134UST，IN136UST
Note: Projectors of the same generation often share the same lamp module. For models not listed, please contact Zorsika technical support for confirmation.
Lamp Module Specifications
| Original Lamp Module Model | SP-LAMP-084 |
| Zorsika Corresponding Model | SP-LAMP-084 |
| Compatible Brand | Infocus |
| Lamp Module Spec | P-VIP230/0.8 E20.8 |
| Arc Gap | 0.8mm |
| Socket/Base Spec | E20.8 |
| Reflector Size | 00X51D |
| Projection Technology | DLP |
| Number of Compatible Models | 2 Models |
The above parameters are from Zorsika product database. For complete technical specifications, please contact sales for details.
FAQ
Q: What should I do if the machine prompts lamp not recognized after replacement?
A: First confirm whether lamp hour reset was performed. The vast majority of such prompts are caused by the timer not being reset. If the error persists after reset, contact Zorsika technical support. We provide reset methods and troubleshooting guides for corresponding models.
Q: How to choose between original packaging, bare lamp, or compatible lamp?
A: For stable brightness and long-term reliability, Zorsika PRO series lamps are the top choice—each parameter matched to original specs, with every lamp tested before shipment, performance on par with OEM, and more reassuring overall with 180-day warranty. For regular business, education, and meeting room use, PRO series is also the most cost-effective choice. Other compatible lamps have lower cost, but lamp core sources and quality control vary significantly, with higher risks of brightness degradation and shortened lifespan. They are only recommended for temporary backup units.
Q: Why choose Zorsika PRO over OEM?
A: The core logic of Zorsika PRO series lamps is "original parameters, self-controlled quality": power, arc gap, and reflector size are matched item by item to OEM specs, but with an additional step of individual lamp testing before shipment, backed by 180-day warranty. Compared to OEM, it's more reassuring overall; compared to other compatible solutions, quality control is more stable.
Q: Is there an installation guide for SP-LAMP-084?
A: Yes. The lamp door positions and disassembly/reassembly steps for these Infocus models are basically consistent. Contact Zorsika sales to obtain illustrated or video tutorials for corresponding models.
Q: What is the lamp warranty period?
A: Zorsika PRO series projector lamps offer 180-day warranty. Normal use and non-human damage (such as lamp explosion, early brightness abnormal decline) are covered by after-sales service; brightness degradation within standard range is considered normal wear and is not covered by warranty.
Why Choose Zorsika PRO Series
SP-LAMP-084 is a high-volume model. Zorsika PRO Series performs consistent control of the lamp core according to original factory parameters, plus an additional factory burn-in test, ensuring better brightness and stability.
- Specification Match: Power, arc gap, and reflector size are matched item by item according to original factory parameters
- Individual Testing: Each lamp is burn-tested before shipment, ensuring brightness and stability
- Warranty Commitment: 180-day lamp warranty, after-sales service for normal use non-human damage
- Stable Supply: Supports bulk purchase and project orders
In short: If you want factory-quality performance with more peace of mind, Zorsika PRO Series projector lamps are designed exactly for this scenario.
Note: Brightness, lifespan and other performance are greatly affected by machine condition, usage environment and heat dissipation. Zorsika does not make unified numerical commitments. It is recommended to test 1-2 samples before bulk purchase.
Daily Maintenance, Extending Lamp Life
- Clean Dust Promptly: Dust accumulation on air intake and air filter will directly raise lamp operating temperature. In dusty environments, clean once every 1-2 months; in normal office environments, clean once every 3-6 months.
- Use Eco Mode Properly: Prioritize eco mode in situations where brightness is sufficient, which can reduce lamp thermal load.
- Avoid Frequent Switching: Thermal cycling is one of the main causes of lamp wear. If not using for a short period, use the blanking function instead of repeatedly powering on and off.
- Proper Shutdown: After powering off, wait for the fan to stop before cutting power. Thermal shock from sudden lamp cooling is a common cause of lamp failure.
- Reset After Replacement: After installing a new lamp, be sure to reset the lamp timer in the menu. Otherwise, the machine will continue to alert based on the old timer.
Related Search
- Zorsika Technical Support Center
- Projector Brand and Compatible Model Search
- Projector Lamp / Lens / Air Filter Product Library
Purchase Inquiry
For Infocus SP-LAMP-084 solutions, bulk pricing, or complete compatibility lists, reach out via:
- Website: www.zorsika.com
- Phone: 0086-20-38551187
- Email: sales@zorsika.com
- Business Hours: Monday to Friday, 9:00-18:00
Lamp module models, specifications, and compatible projector models in this article are sourced from the Zorsika product database. Data is continuously updated. Subject to actual quotation confirmation.