Christie 003-120242-01 Projector Lamp for LX300 LX380 LX450 Genuine Replacement

Lamp Module Specifications

The above parameters are from Zorsika's product database. For complete technical specifications, please contact sales.

Where it can be used: 3 Christie model compatibility list

The following are verified compatible Christie projector models for 003-120242-01, models separated by commas:

LX300, LX380, LX450

Note: Projectors from the same generation often share the same lamp module. For models outside this list, please contact Zorsika technical support for confirmation.

Procurement pitfalls to avoid: Three key verification items

1. Verify nameplate model: Open the projector lamp door. The model on the lamp module label should exactly match 003-120242-01. Some Christie models may have suffix differences like -V or +, but the lamp modules are usually interchangeable. When in doubt, take a photo of the nameplate and send it to Zorsika technical support for confirmation.
2. Confirm lamp form: The same model comes in four forms: OEM packaged, OEM bare, compatible, and second-hand. These four forms vary significantly. OEM bare refers to OEM arc tube with third-party housing, generally offering the best value. Be sure to clearly specify which form you need on the purchase order to avoid disputes upon receipt.
3. Verify physical specifications: Reflector size 80X80L and arc gap must match the original lamp. Any mismatch may result in inability to install or failure to ignite.

Why choose Zorsika PRO series

003-120242-01 is a high-volume model. Zorsika PRO series implements arc tube consistency control according to OEM parameters, with an additional factory ignition test for better brightness and stability assurance.

• Specs benchmark: Power, arc gap, and reflector size are matched item by item to OEM specifications
• Individual testing: Each unit undergoes ignition testing before shipment to ensure brightness and stability
• Warranty commitment: 180-day warranty on lamps; normal use non-human damage is covered by after-sales service
• Stable supply: Supports bulk procurement and project fulfillment

In a nutshell: If you want OEM-quality performance but prefer a more worry-free overall experience, the Zorsika PRO series projector lamp is designed precisely for this scenario.

Note: Brightness, lifespan, and other performance metrics are greatly affected by machine condition, usage environment, and thermal management. Zorsika does not make unified numerical commitments. It is recommended to test 1-2 sample units before bulk procurement.

Daily Maintenance to Extend Lamp Life

• Clean Dust Regularly: Dust buildup on the air intake and air filter directly raises lamp operating temperature. In dusty environments, clean every 1-2 months; in normal office environments, clean every 3-6 months.
• Use Eco Mode: Prioritize eco mode when brightness is sufficient, as it reduces the lamp's thermal load.
• Avoid Frequent Switching: Thermal cycling is one of the main causes of lamp wear. If not using for a short period, use the shutter function instead of repeatedly turning the power off.
• Proper Shutdown: After powering off, wait until the fan stops before cutting power. Shutting down while hot causes the lamp to cool abruptly, which is a common cause of lamp failure.
• Reset After Replacement: After installing a new lamp, be sure to reset the lamp timer in the menu. Otherwise, the machine will continue to alarm based on the old timer.

FAQ

Q: My projector is not on the list of 3 models above. Can I use 003-120242-01?

A: The list contains verified models, not all compatible models. Christie products from the same generation often share lamp modules. Take a photo of the unit's nameplate and the original lamp label and send them to Zorsika technical support—they can confirm whether it is compatible.

Q: How to choose between original package, bare lamp, or replacement?

A: If you prioritize brightness stability and long-term reliability, the Zorsika PRO series lamp is the top choice—each parameter matched to OEM specs, with every unit tested by lighting before shipment. Performance on par with OEM, more worry-free overall, backed by 180-day warranty. For regular business, education, or meeting room use, the PRO series is also the more cost-effective option. Other replacement lamps, while cheaper, have greater variability in lamp core sourcing and quality control, with higher risks of brightness degradation and shortened lifespan. They are only recommended for temporary backup use.

Q: Why Choose Zorsika PRO Over OEM?

A: The core logic of Zorsika PRO series is "OEM specs, self-controlled quality": power, arc gap, and reflector size are matched item by item to OEM standards, but with an additional per-unit lighting test before shipment and a 180-day warranty. Compared to OEM, it is more worry-free overall. Compared to other replacement options, the quality control is more stable.

Q: The machine shows "lamp not recognized" after replacing the lamp. What should I do?

A: First confirm whether the lamp timer was reset. The vast majority of such alerts are caused by an uncleared timer. If the error persists after reset, contact Zorsika technical support—we provide reset methods and troubleshooting guides for the corresponding models.

Q: Is there an installation tutorial for 003-120242-01?

A: Yes. The lamp door positions and disassembly steps are essentially the same across these Christie models. Contact Zorsika sales to get illustrated or video tutorials for your specific model.

Q: What is the warranty period for lamps?

A: Zorsika PRO series projector lamps come with a 180-day warranty. Normal use and non-human damage (such as lamp failure, early abnormal light decay) are covered by after-sales service. Brightness decay within standard range is considered normal usage wear and is not covered by warranty.

Related Links

• Zorsika Technical Support Center
• Projector Brands and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Purchase Consultation

For Christie 003-120242-01 solution consultation, bulk pricing, or complete compatible model list, contact us through:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

The lamp module models, specifications, and compatible model data in this article are sourced from the Zorsika product database. Data is continuously updated and subject to confirmation upon actual inquiry.