Christie 003-120377-01 Projector Lamp Compatible with LX500 OEM Replacement

Christie 003-120377-01 Model Compatibility List (1 model)

Below is the verified model compatibility list for 003-120377-01 in Christie projectors, models separated by commas:

LX500

Note: Projectors of the same generation often share the same lamp module. For models not on the list, please contact Zorsika technical support for confirmation.

Specifications Overview

The above parameters are sourced from Zorsika's product database. Contact your sales representative for complete technical specifications if needed.

Frequently Asked Questions

Q: What should I do if the projector shows "lamp not recognized" after replacement?

A: First, verify whether the lamp timer has been reset. Most warning messages are caused by uncleared timers. If the error persists after reset, contact Zorsika technical support—we provide reset methods and troubleshooting guidance for the corresponding models.

Q: What is the difference between original packaging, bare lamp, and compatible options?

A: For stable brightness and long-term reliability, Zorsika PRO series lamps are the top choice—each parameter matched against original specifications, with every unit tested before shipment, delivering OEM-level performance with greater peace of mind and backed by 180-day warranty. The PRO series is also the most cost-effective option for general business, education, and meeting room use. Other compatible lamps may cost less, but come with higher risks of brightness degradation and shorter lifespan due to inconsistent arc tube sources and quality control. They are only recommended for temporary backup units.

Q: Why choose Zorsika PRO over OEM lamps?

A: Zorsika PRO series follows the core principle of "original specifications, self-controlled quality": power, arc gap, and reflector size are matched item by item against OEM specs, plus an additional pre-shipment individual lamp testing, with 180-day warranty. Compared to OEM, it's more cost-effective; compared to other compatible options, quality control is far more stable.

Q: Is there an installation guide for 003-120377-01?

A: Yes. The lamp door positions and disassembly procedures are essentially consistent across these Christie models. Contact Zorsika sales to receive illustrated or video tutorials for the corresponding models.

Q: What is the warranty period for the lamp?

A: Zorsika PRO series projector lamps offer 180-day warranty. Normal use and non-human damage (such as lamp explosion, abnormal early-stage brightness decay) are covered by after-sales service. Brightness attenuation within standard range is considered normal wear and is not covered by warranty.

What Zorsika PRO Series Offers

003-120377-01 is a high-availability model. Zorsika PRO series implements arc tube consistency control based on original OEM specifications, with an additional pre-shipment individual lamp testing for better brightness and stability assurance.

• Specification matching: Power, arc gap, and reflector size matched item by item against OEM specifications
• Individual testing: Every unit tested before shipment for assured brightness and stability
• Warranty commitment: 180-day warranty on lamps, after-sales service for normal use non-human damage
• Stable supply: Support for bulk procurement and project-based orders

In short: Zorsika PRO series projector lamps are designed for users who want OEM-quality performance with greater overall cost-effectiveness.

Note: Brightness, lifespan, and other performance metrics are greatly affected by machine condition, usage environment, and thermal management. Zorsika does not make unified numerical commitments. We recommend requesting 1-2 sample units for lighting tests before bulk procurement.

Regular Maintenance to Extend Lamp Life

• Clean Dust Promptly: Accumulated dust in the air intake and air filter directly raises the lamp's operating temperature. In dusty environments, clean once every 1-2 months; in typical office environments, clean every 3-6 months.
• Use Eco Mode: When brightness is sufficient, prioritize eco mode to reduce lamp thermal load.
• Avoid Frequent On/Off Cycling: Thermal cycling is a major cause of lamp wear. For short periods of non-use, use the blank function instead of repeatedly turning the power off and on.
• Proper Shutdown: After turning off, wait until the fan stops before cutting power. Powering off while still hot causes sudden lamp cooling, a common cause of lamp failure.
• Reset After Replacement: After installing a new lamp, be sure to reset the lamp timer in the menu; otherwise, the machine will continue to alarm based on the old timer.

Useful Links

• Zorsika Technical Support Center
• Projector Brand and Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Catalog

Procurement Inquiries

For solution consultation, bulk orders, or complete compatible projector model lists for Christie 003-120377-01, you can contact us through the following:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

Lamp module models, specifications, and compatible model data in this article are sourced from the Zorsika product database. Data is continuously updated; please refer to actual quotes for confirmation.