Christie 003-120394-01 Projector Lamp for LX900 LW600 Original OEM Replacement

Christie 003-120394-01 Model Compatibility List (2 Models)

The following are verified compatible projector models for 003-120394-01 in Christie projectors, with model names separated by commas:

LX900, LW600

Note: Projectors of the same generation often share the same lamp module. For models not listed, please contact Zorsika technical support for confirmation.

Specifications Overview

The above parameters are sourced from Zorsika's product database. Contact your sales representative for complete technical specifications.

Frequently Asked Questions

Q: The projector shows lamp not recognized after replacement. What should I do?

A: First, confirm whether the lamp timer was reset. Most such prompts are caused by uncleared timers. If the error persists after reset, contact Zorsika technical support for reset procedures and troubleshooting guidance for your specific model.

Q: Original packaged, original bare, or compatible—which should I choose?

A: For stable brightness and long-term reliability, the Zorsika PRO series projector lamp is the top choice—each unit is matched to original factory specifications and tested before shipment, offering performance on par with OEM lamps with more peace of mind, backed by a 180-day warranty. For regular commercial, education, or meeting room use, the PRO series is also the more cost-effective option overall. Other compatible lamps, while cheaper, have greater variability in arc tube source and quality control, with higher risks of brightness decay and shortened lifespan. They are only recommended for temporary backup use.

Q: Why choose Zorsika PRO over OEM?

A: The core logic of Zorsika PRO series is "original factory specifications, independent quality control": power, arc gap, and reflector size are matched item by item to OEM specs, with one additional step—every unit undergoes testing before shipment—and a 180-day warranty. Compared to OEM, it offers more peace of mind; compared to other compatible options, it has more stable quality control.

Q: Is there an installation guide for 003-120394-01?

A: Yes. The lamp door positions and removal/installation steps are essentially consistent across these Christie models. Contact Zorsika sales to receive illustrated or video tutorials for your specific model.

Q: What is the warranty period for the lamp?

A: Zorsika PRO series projector lamps come with a 180-day warranty. Normal use and non-human damage (such as lamp explosion or early abnormal light decay) are covered for after-sales service; brightness decay within standard range is considered normal usage wear and tear and is not covered by warranty.

Same Specifications—Why Recommend Zorsika PRO

For high-volume standard lamp modules like 003-120394-01, the Zorsika PRO series provides OEM-spec compatible solutions with power, arc gap, and reflector size matched item by item to OEM standards, every unit tested before shipment, ready for installation without structural modifications.

• Spec Match: Power, arc gap, and reflector size matched item by item to OEM specifications
• Per-Unit Testing: Every unit undergoes testing before shipment for guaranteed brightness and stability
• Warranty Commitment: 180-day warranty on lamps, after-sales service for normal use and non-human damage
• Stable Supply: Supports bulk procurement and project-based supply

Bottom line: If you want OEM quality but more peace of mind overall, the Zorsika PRO series projector lamp is designed exactly for this scenario.

Note: Brightness, lifespan, and other performance characteristics are greatly affected by machine condition, usage environment, and thermal management. Zorsika does not make unified numerical commitments. It is recommended to obtain 1-2 sample units for testing before bulk procurement.

Daily Maintenance: Extend Your Lamp Life

• Clean Dust Promptly: Dust buildup on the air intake and filter directly increases lamp operating temperature. In dusty environments, clean every 1-2 months; in normal office settings, clean every 3-6 months.
• Use Eco Mode: Prioritize eco mode when brightness is sufficient, as it reduces lamp thermal load.
• Avoid Frequent Switching: Thermal cycling is a major cause of lamp degradation. If not using for a short period, use the blank/shutter function instead of repeatedly turning the power on and off.
• Proper Shutdown: Always wait for the fan to stop after turning off before disconnecting power. Shutting down while still hot causes sudden cooling, which is a common cause of lamp rupture.
• Reset After Replacement: After installing a new lamp, be sure to reset the lamp timer in the menu. Otherwise, the machine will continue to alert based on the old timer.

Related Search

• Zorsika Technical Support Center
• Projector Brand & Compatible Model Lookup
• Projector Lamp / Lens / Air Filter Product Library

Procurement Consultation

For Christie 003-120394-01 consultation, bulk pricing, or complete compatibility list, contact us via:

• Website: www.zorsika.com
• Phone: 0086-20-38551187
• Email: sales@zorsika.com
• Business Hours: Monday to Friday, 9:00-18:00

Lamp module model numbers, specifications, and compatible projector data in this article are sourced from the Zorsika product database, which is continuously updated. Please confirm with actual inquiry.